thanks everyone for there help, i will check out your guys suggestions,, this is all stock setup, i think what i did wrong was, i made my own starter heat shield, from fiberglass and metal tape, i think i made my own little loop in the circuit, , when i try to crank and it continue to run away with itself, i pull the cable from the batt., and the loop ends there is no power drain from the batt until i try again, so IM going to pull the heat shield off and see if that cures my problem, i hope i don't have to pull the sucker, i have a newer corvette do the same thing i replace the starter and that fix that problem, but i think i cause my own problem with the chevelle,, thanks again for all your advice, i let you all know what the deal is when figure it out. Rick
