RE: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-31 Thread Richard M. Pruett



Me Too!

  -Original Message-From: 
  [EMAIL PROTECTED] 
  [mailto:[EMAIL PROTECTED]On Behalf Of Kyle 
  BennettSent: Friday, October 31, 2003 6:28 AMTo: 
  [EMAIL PROTECTED]Subject: Re: [Chevelle-list] 
  Flowmaster's 30 series or 40 delta flow series
  

  
I'd like to hear it
 
Thanks,
Kyle Bennett
Raleigh, NC 
 
---Original 
Message---
 

From: The Chevelle Mailing 
List
Date: Friday, October 
31, 2003 1:44:38 AM
To: [EMAIL PROTECTED]
Subject: Re: 
    [Chevelle-list] Flowmaster's 30 series or 40 delta flow 
series
 
I have a sound bite of my 454's exhaust 
with 40 series flows and the H-pipe.  Email me if anyone wants 
it.
 
Tom
 

  

  
  


  
  IncrediMail - Email has finally evolved - Click 
  Here
<><>

Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-31 Thread Kyle Bennett






I'd like to hear it
 
Thanks,
Kyle Bennett
Raleigh, NC 
 
---Original Message---
 

From: The Chevelle Mailing List
Date: Friday, October 31, 2003 1:44:38 AM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series
 
I have a sound bite of my 454's exhaust with 40 series flows and the H-pipe.  Email me if anyone wants it.
 
Tom
 







  IncrediMail - Email has finally evolved - Click Here

[Chevelle-list] Flowmaster's 30 series or 40 delta flow series > Big Block = 70's !

2003-10-30 Thread Cecil \"Steve\" Martin



I 
talked to the sales manager that was at CB03 about this in depth ...he asked a 
lot of questions about my car,but basically it came down to making sure the 
mufflers matched the need. For a big block he recommended the 70's. He seemed to 
think they would have a better flow to handle a big block output. Those baby's 
are huge. Bought a pair but not on yet. 
 
I have 
also read that you don't want to go too big on the pipes.for a street car 
big block everything I read said 2.5 is the way to go. Not if you have a strip 
car strictly performance/highly modified...then maybe go 3 inches, but I 
have read where too large for a street engine will cause a loss in 
torque.
 
My 396 
will get the 70's and 2.5 inch pipe with an X pipe up front.which 
unfortunately at last check Flowmaster didn't make or sell.
 
  
Steve

  -Original Message-From: 
  [EMAIL PROTECTED] 
  [mailto:[EMAIL PROTECTED]On Behalf Of 
  LandMMilanoSent: Thursday, October 30, 2003 2:07 
  PMTo: The Chevelle Mailing ListSubject: Re: 
  [Chevelle-list] Flowmaster's 30 series or 40 delta flow 
  series
  yea, there is 4 inches diff. in the two 
  sizes,   the motor is a stock 396 with hooker headers, the exhaust 
  on it now is "original" and has a few holes in the pipes behind the 
  mufflers.  also the exhaust will run out the back to the bumper a full 
  system.., no turn downs.  I will prob. stay with the 30's, buy the 
  way I am looking at a  2.5in system. 
  
- Original Message - 
From: 
John 
Nasta 
To: The Chevelle Mailing List 

Sent: Thursday, October 30, 2003 12:21 
PM
Subject: RE: [Chevelle-list] 
Flowmaster's 30 series or 40 delta flow series


The 
biggest difference between the 30 and 40 series is the physical dimensions 
of the muffler itself. 50 series are the same physical size as the 30 
series, but are quieter. I have 50s on a SBC and they sound great IMO. I am 
glad I didn’t get the louder ones.
 
John 
Nasta
 
 
 
-Original 
Message-From: [EMAIL PROTECTED] 
[mailto:[EMAIL PROTECTED]On Behalf Of LandMMilanoSent: Thursday, October 30, 2003 11:52 
    AMTo: 
[EMAIL PROTECTED]Subject: [Chevelle-list] Flowmaster's 
30 series or 40 delta flow series
 
on 
their system guide they recommend the 30 series for chevelle, GTO/lemans, 
buick gs and the  40 delta flow for a camaro, mustang, 
firebird.  Hmm, most of the camaro,mustangs I know have small 
blocks, my chevelle is a BB.  Does anyone have BB with 40's on 
it.  How does it sound, flowmaster only gives SB examples on their web 
site. thanks. 


Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread MICRLASER


I have a sound bite of my 454's exhaust with 40 series flows and the H-pipe.  Email me if anyone wants it.
 
Tom


Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread Bad66Chevelle454

I have a 454, with 40 series mufflers...2.5 inch exhaust, with a H-Pipe. I really like the sound, sounds clean and nice. They sound great at idle, but they really open up when you step on it. I do have it recorded, but its really distorted, and doesnt sound anything like it. I love the soundthe H-pipe helps in that its a even soundAny questions, feel free to ask. 
 
 

-Tim-1966 Chevelle 


RE: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread Matthew Wooliever



 
Ditto 
that!  I had 30's on my SBC stroker motor and recently went to 50's.  
Still loud and mean, but not quite the open pipe sound of before.  
:)
 
-Original Message-From: 
[EMAIL PROTECTED] 
[mailto:[EMAIL PROTECTED]On Behalf Of John 
NastaSent: Thursday, October 30, 2003 1:22 PMTo: The 
Chevelle Mailing ListSubject: RE: [Chevelle-list] Flowmaster's 30 
series or 40 delta flow series

The 
biggest difference between the 30 and 40 series is the physical dimensions of 
the muffler itself. 50 series are the same physical size as the 30 series, but 
are quieter. I have 50s on a SBC and they sound great IMO. I am glad I didn’t 
get the louder ones.
 
John 
Nasta
 
 
 
-Original 
Message-From: 
[EMAIL PROTECTED] 
[mailto:[EMAIL PROTECTED]On Behalf Of LandMMilanoSent: Thursday, October 30, 2003 11:52 
AMTo: 
[EMAIL PROTECTED]Subject: [Chevelle-list] Flowmaster's 30 
series or 40 delta flow series
 
on their 
system guide they recommend the 30 series for chevelle, GTO/lemans, buick 
gs and the  40 delta flow for a camaro, mustang, 
firebird.  Hmm, most of the camaro,mustangs I know have small 
blocks, my chevelle is a BB.  Does anyone have BB with 40's on 
it.  How does it sound, flowmaster only gives SB examples on their web 
site. thanks. 


Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread LandMMilano



You think the X pipe is much better than the H 
pipe? or about the same?

  - Original Message - 
  From: 
  [EMAIL PROTECTED] 
  
  To: [EMAIL PROTECTED] 
  
  Sent: Thursday, October 30, 2003 1:00 
  PM
  Subject: Re: [Chevelle-list] Flowmaster's 
  30 series or 40 delta flow series
  Hi Guys, I recently bought 
  original flows 40 series for my 383 equipped 65 elky. I have dyno max headers, 
  2 1/2" pipes, a Dr gas X pipe with outlets just after the rear wheels and it 
  sounds perfect. I had a set of Summit turbos on this car with the same 
  setup.too loud..lots of resonance, I replaced them with Dynomax super 
  turbostoo quiet...couldn`t even hear the rump of the camswitched to 
  the present 40`s expecting resonance, and was totally surprised that is is 
  minimal. The X pipe has a lot to do with it, I think the X pipe is an 
  investment well worth the money. I now have what I believe is the perfect 
  exhaust note. You can hear all the rump of the cam, excellent sound outside 
  the vehicle and just righjt inside. The best part is the 40`s are all over 
  ebay for about $45 delivered. just my $.02. Bob Myers, SD 



Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread Rjmmyers
Hi Guys,
 I recently bought original flows 40 series for my 383 equipped 65 elky. I have dyno max headers, 2 1/2" pipes, a Dr gas X pipe with outlets just after the rear wheels and it sounds perfect. I had a set of Summit turbos on this car with the same setup.too loud..lots of resonance, I replaced them with Dynomax super turbostoo quiet...couldn`t even hear the rump of the camswitched to the present 40`s expecting resonance, and was totally surprised that is is minimal. The X pipe has a lot to do with it, I think the X pipe is an investment well worth the money. I now have what I believe is the perfect exhaust note. You can hear all the rump of the cam, excellent sound outside the vehicle and just righjt inside. The best part is the 40`s are all over ebay for about $45 delivered. just my $.02. Bob Myers, SD 


Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread LandMMilano



yea, there is 4 inches diff. in the two 
sizes,   the motor is a stock 396 with hooker headers, the exhaust on 
it now is "original" and has a few holes in the pipes behind the mufflers.  
also the exhaust will run out the back to the bumper a full system.., no turn 
downs.  I will prob. stay with the 30's, buy the way I am looking at a 
 2.5in system. 

  - Original Message - 
  From: 
  John Nasta 
  
  To: The Chevelle Mailing List 
  Sent: Thursday, October 30, 2003 12:21 
  PM
  Subject: RE: [Chevelle-list] Flowmaster's 
  30 series or 40 delta flow series
  
  
  The 
  biggest difference between the 30 and 40 series is the physical dimensions of 
  the muffler itself. 50 series are the same physical size as the 30 series, but 
  are quieter. I have 50s on a SBC and they sound great IMO. I am glad I didn’t 
  get the louder ones.
   
  John 
  Nasta
   
   
   
  -Original 
  Message-From: [EMAIL PROTECTED] 
  [mailto:[EMAIL PROTECTED]On Behalf Of LandMMilanoSent: Thursday, October 30, 2003 11:52 
  AMTo: 
  [EMAIL PROTECTED]Subject: [Chevelle-list] Flowmaster's 30 
  series or 40 delta flow series
   
  on 
  their system guide they recommend the 30 series for chevelle, GTO/lemans, 
  buick gs and the  40 delta flow for a camaro, mustang, 
  firebird.  Hmm, most of the camaro,mustangs I know have small 
  blocks, my chevelle is a BB.  Does anyone have BB with 40's on 
  it.  How does it sound, flowmaster only gives SB examples on their web 
  site. thanks. 


Re: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread Capt Crunch
Are you set on flowmasters? I personally don't car for them much... 
horsepower suckers. The 30's are supposedly their redesign "high 
Performance" line. I haven't heard them, but would be real interested to see 
how they do. The 40's series is a pretty loud 2 chamber. If you have an semi 
agressive BBC they will roar... but obviously sound is detirminant on many 
factors like combo, exhaust size, exhaust design, etc. The 50's series would 
be a bit more mellow... 70's series is mellower yet.

Hard to say what muff to choose not knowing your combo and personal tastes. 
My motors are usually pretty extreme (at least that is what the locals say 
LOL) and I grew out of the louder is better phase a long time ago. I still 
really like the Dynomax and the Hooker Mufflers. They are among the best in 
terms of preserving HP on a dyno and are cheaper then the flowmasters. Bang 
for the buck... I love the DynoMax Turbo muffs. Not obnoxiosly loud, but 
enough growl to let people know you are there :)

Not sure what size you want... but I have a set of 2 1/2 Rhino Mufflers 
lying around. Used for about 20 passes. They are similar to the flowmaster 
40's, but are better performance wise. They really growl nice on the 
throttle.

Mikey

From: "LandMMilano" <[EMAIL PROTECTED]>
Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series
Date: Thu, 30 Oct 2003 10:51:46 -0600
on their system guide they recommend the 30 series for chevelle, 
GTO/lemans, buick gs and the  40 delta flow for a camaro, mustang, 
firebird.  Hmm, most of the camaro,mustangs I know have small blocks, my 
chevelle is a BB.  Does anyone have BB with 40's on it.  How does it sound, 
flowmaster only gives SB examples on their web site. thanks.
_
Send instant messages to anyone on your contact list with  MSN Messenger 
6.0.  Try it now FREE!  http://msnmessenger-download.com




RE: [Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread John Nasta









The biggest
difference between the 30 and 40 series is the physical dimensions of the
muffler itself. 50 series are the same physical size as the 30 series, but are
quieter. I have 50s on a SBC and they sound great IMO. I am glad I didn’t get
the louder ones.

 

John Nasta

 

 

 

-Original
Message-
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of LandMMilano
Sent: Thursday, October 30, 2003
11:52 AM
To: [EMAIL PROTECTED]
Subject: [Chevelle-list]
Flowmaster's 30 series or 40 delta flow series

 

on
their system guide they recommend the 30 series for chevelle, GTO/lemans, buick
gs and the  40 delta flow for a camaro, mustang,
firebird.  Hmm, most of the camaro,mustangs I know have small
blocks, my chevelle is a BB.  Does anyone have BB with 40's on
it.  How does it sound, flowmaster only gives SB examples on their web
site. thanks. 








[Chevelle-list] Flowmaster's 30 series or 40 delta flow series

2003-10-30 Thread LandMMilano



on their system guide they recommend the 30 series 
for chevelle, GTO/lemans, buick gs and the  40 delta flow for a 
camaro, mustang, firebird.  Hmm, most of the camaro,mustangs I 
know have small blocks, my chevelle is a BB.  Does anyone have BB with 
40's on it.  How does it sound, flowmaster only gives SB examples on 
their web site. thanks.