Re: [Chevelle-list] Quick time Electric Cutouts

2010-08-08 Thread bill 

  - Original Message - 
  From: Bob n Cheri 
  To: chevelle-list 
  Sent: Saturday, August 07, 2010 6:26 PM
  Subject: [Chevelle-list] Quick time Electric Cutouts


  Does or has anyone used the Quick Time Electric cutouts instead of the caps 
on on your exhaust systems?
  I'm thinking about a set but that's a lot of bucks if they don't last.
  Their 90 day warranty isn't too confidence inspiring either.

  I guess I want to know how well they fit. fit is good

  Do they leak at the butterflies. yes but just a bit

  Have you run into clearance problems ( will be going on a 71 SS 454 stock 
ride height with long tube headers and x pipe. you may need to move the floor 
depending on where they are located

  If you had issues with the company.

  How long did they last or are they still working. first set about 1 week the 
screws that hold the solinoid to the butterfly backed out and ripped out the 
wiring summit replaced them i took the new ones apart before i installed them 
and put locktight on all there screws

  Do any of you use the controller that can be purchased additionally. came 
with it

  I know 3 wing nuts and the caps come off but I was just looking at this as an 
option.

  Thanks,
  Bob Belz 71 SS 454

Re: [Chevelle-list] Quick time Electric Cutouts

2010-08-08 Thread Dale 
I haven't really heard good or bad info but you might take a look at those
made by DMH - http://www.dmhperformance.com/.  These have slotted flanges
that allow the installation to be rotated a bit for installation clearance.

 

Dale

From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of bill
Sent: Sunday, August 08, 2010 7:55 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Quick time Electric Cutouts

 

 

- Original Message - 

From: Bob n Cheri mailto:robertb...@msn.com  

To: chevelle-list mailto:chevelle-list@chevelles.net  

Sent: Saturday, August 07, 2010 6:26 PM

Subject: [Chevelle-list] Quick time Electric Cutouts

 

Does or has anyone used the Quick Time Electric cutouts instead of the caps
on on your exhaust systems?

I'm thinking about a set but that's a lot of bucks if they don't last.

Their 90 day warranty isn't too confidence inspiring either.

 

I guess I want to know how well they fit. fit is good

 

Do they leak at the butterflies. yes but just a bit

 

Have you run into clearance problems ( will be going on a 71 SS 454 stock
ride height with long tube headers and x pipe. you may need to move the
floor depending on where they are located

 

If you had issues with the company.

 

How long did they last or are they still working. first set about 1 week the
screws that hold the solinoid to the butterfly backed out and ripped out the
wiring summit replaced them i took the new ones apart before i installed
them and put locktight on all there screws

 

Do any of you use the controller that can be purchased additionally. came
with it

 

I know 3 wing nuts and the caps come off but I was just looking at this as
an option.

 

Thanks,

Bob Belz 71 SS 454

[Chevelle-list] Quick time Electric Cutouts

2010-08-07 Thread Bob n Cheri 
Does or has anyone used the Quick Time Electric cutouts instead of the caps on 
on your exhaust systems?
I'm thinking about a set but that's a lot of bucks if they don't last.
Their 90 day warranty isn't too confidence inspiring either.

I guess I want to know how well they fit.

Do they leak at the butterflies.

Have you run into clearance problems ( will be going on a 71 SS 454 stock ride 
height with long tube headers and x pipe.

If you had issues with the company.

How long did they last or are they still working.

Do any of you use the controller that can be purchased additionally.

I know 3 wing nuts and the caps come off but I was just looking at this as an 
option.

Thanks,
Bob Belz 71 SS 454