Re: [Chevelle-List] oil dipstick removal
May want to spray a little WD-40 or some other product around base before attempting to pull it. I can remember having great difficulties getting one out after breaking it off flush with block. Larry
RE: [Chevelle-List] oil dipstick removal
Replies to this message are sent to The Chevelle Mailing List If it has never been out, you may have a hard time just pulling it. I had to twist mine like it was threaded, even though it wasn't. And, of course, since it is bent, you run into clearance problems halfway around. Just make sure not to kink it when twisting. Good luck! Jim Erickson -Original Message- From: Daniel [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 11, 2001 1:52 AM To: [EMAIL PROTECTED] Subject: [Chevelle-List] oil dipstick removal Quick question: How do I remove the oil dipstick so I can replace the driver's side header? Does it pull out? Twist out? Or what? Thanks, Daniel 72 Malibu 350/350 53 GMC 97 Intrepid - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
Re: [Chevelle-List] oil dipstick removal
Replies to this message are sent to The Chevelle Mailing List pull out, on small blocks at least. --- Daniel <[EMAIL PROTECTED]> wrote: > Quick question: > How do I remove the oil dipstick so I can replace > the driver's side header? > Does it pull out? Twist out? Or what? > > Thanks, > Daniel > 72 Malibu 350/350 > 53 GMC > 97 Intrepid > > = André __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]