Title: Message
Yes Hooker has one with 13/4, If I recall correct, part no is 2116. Is sounds tempting
with stainless though
Hans
-Ursprungligt meddelande-
Från: Clint Hooper [mailto:chooper@sw.rr.com]
Skickat: Thursday, July 07, 2005
06:36
Till: The Chevelle Mailing List
Ämne: Re: [Chevelle-list]
stainless headers
Not sure 1 3/4 tubes are
available,Hans. 1 5/8 would work fine,though. Hooker might have what
you're looking for.
Clint Hooper
HH Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: Hans Edlund
Hi Clint
I am looking for a pair
of headers for a 71 Camino. SBC and I need 1 ¾ due to the charger. Until
now I didnt thought stainless steel was an option. But if you know
some
Hans
-Ursprungligt meddelande-
Från: Clint Hooper
[mailto:[EMAIL PROTECTED]r.com]
Skickat: Wednesday,
July 06, 2005 12:43
Till: The Chevelle Mailing List
Ämne: [Chevelle-list] stainless
headers
What year car do you need them
for,Andre? I'll talk to Al and see what I can do.
Clint Hooper
HH Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: André-Tigergutt
Hi
again,
I really
wanted something bigger but Scott there answered that they wouldnt offer
anything else than 1 5/8
I
totally agree that 1 5/8 are right for a 350, but my later
plansinclude a much bigger sbc (434 or 454cid) so if they offered 1
7/8 I'd go for that right away to avoid buying another set a a later time
even if that would cost some tq right now.
Maybe Al
offered to build a set for you because you know him ??
Se below
for the Q's A's:
1Do
you have any small block Chevelle headers with bigger primary tubes than 1
5/8? SORRY THE 1.625
PRIMARIES ARE ALL WE HAVE TO OFFER.
2Do
you offer any other style of flange style than the leakprone 3bolt style
(slip-on style with band clamp or something like Burns v-band)? SLIP-FIT STYLE IS AVAILABLE.
3Do
you supply theconeswith flanges thatare to be welded to the
exhaust system toghether with the headers? NO
4How
thick are the flanges that are to be mounted on the engine? 0.375 THICK
5If
I were to upgrade the headers to 18deg heads at a later time could I just
change the engine flanges or would I need a complete new header? YOU WOULD HAVE TO MAKE THAT CALL, WE COULD SUPPLY YOU WITH THE
FLANGES WHEN THEN TIME COMES.
6Do
the headers have equal lenght primary tubes? NO THEY ARE NOT EQUAL LENGTH, SEE ATTACHED PICTURE.
thanks!
Have Fun
André
-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Clint Hooper
Sent: 6. juli 2005 20:55
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list]
stainless headers
Stainless Works will build their
headers with 1 5/8, 1 3/4, or 1 7/8 primaries. 1 5/8
tubes would be my preference for my 350.
Talk to Al Noe,the owner.
Clint Hooper
HH Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: André-Tigergutt
Hi
Clint,
looks
like they are fine, I asked some questians and even if they are only 1
5/8 they sound really nice.
they are
not that expensive either, around $600
Have Fun
André
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Clint Hooper
Sent: 6. juli 2005 20:36
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list]
stainless headers
Hooker also builds some of their
headers now in stainless. If I ever switch to stainless headers,Stainless Works
will be the ones I use.
Clint Hooper
HH Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: André-Tigergutt
Hi all,
have
anyone tried headers from stainless works? I know Clint proposed them a while
back but I have no more than that.
any
other brand of stainless small block headers to consider??
thanks !
Have Fun
André
