Re: Help !!! [7:72096]
the line must be n interective mode if u want the user to select the proto or the AS to autosence the proto used based on there flags. u just need to put the line in interactive mode b4 the autoselect command, that's it, cause in dedicated mode the line is simply bound to the proto defined. H T a icrit dans le message de news:[EMAIL PROTECTED] what does it mean? and Why I am getting this message? TestR(config-line)#autoselect ppp %Autoselect w/o the interface command 'Async mode interactive' is useless Cheers Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=72102t=72096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: interface and line to default [7:72095]
these links would be helpfull to u: http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca774.html http://www.cisco.com/en/US/tech/tk713/tk507/technologies_tech_note09186a0080094862.shtml http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087ae8.html as for ur first question about the lines, i'm not sure i got what u mean H T a icrit dans le message de news:[EMAIL PROTECTED] Hi all, To bring back the physical interface to it is default we use default interface type number global config mode The question is how we bring back the default sting for the Router#sho line yp Tx/RxA Modem Roty AccO AccI Uses Noise Overruns Int *0 CTY -- --- 0 0 0 - 65 AUX 9600/9600 -- --- 0 0 0 - * 66 VTY -- --- 1 0 0 - * 67 VTY -- --- 1 0 0 - 68 VTY -- --- 0 0 0 - 69 VTY -- --- 0 0 0 - 70 VTY -- --- 0 0 0 - How to make use of the following virtual interfaces? Virtual-Access Virtual-FrameRelay Virtual-Template Virtual-TokenRing Good luck :) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=72117t=72095 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: New MPLS book [7:72029]
the first edition whould be enough to pass the exam, but u will see u will want to get the new book, cause it's a very interesting subject it's (the futur of networking)... Muhtari Adanan a icrit dans le message de news:[EMAIL PROTECTED] is it worth getting the new MPLS book (MPLS and VPN Architectures, Volume II by Ivan Jim) for the CCIE CS exams? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=72031t=72029 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Policy-Based Routing [7:71944]
here is a link http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca590.html Jason Viera a icrit dans le message de news:[EMAIL PROTECTED] Just for clarification can someone comment on or confirm the following: If policy routing is enabled on an interface and the policy states that a packet received on that particular interface be sent to a next hop IP or an interface, will the packet be sent to that next hop even if a route exists via an IGP that points to another next hop?? I guess my real question is does the packet even get processed in regards to the routing table, or is its destination set as soon as its matched by the route-map applied to the ingress interface?? Thanks in advance!! Jason Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=71973t=71944 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Policy-Based Routing [7:71944]
It actually depends on which command u use: if u use the set ip next-hop OR set interface THEN packets will be sent to the destinations defined in these commands if u use the set ip default next-hop OR set default interface THEN packets will be sent to the defined destinations if there is no explicit route. here is a link: http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca590.html Jason Viera a icrit dans le message de news:[EMAIL PROTECTED] Just for clarification can someone comment on or confirm the following: If policy routing is enabled on an interface and the policy states that a packet received on that particular interface be sent to a next hop IP or an interface, will the packet be sent to that next hop even if a route exists via an IGP that points to another next hop?? I guess my real question is does the packet even get processed in regards to the routing table, or is its destination set as soon as its matched by the route-map applied to the ingress interface?? Thanks in advance!! Jason Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=71949t=71944 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: chat script ... modem [7:71947]
Here is a link: http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca6f5.html AK H T a icrit dans le message de news:[EMAIL PROTECTED] Hi all, Can any one help about Chat script configuring. It will be very nice if we get some diagrams for the detailed configurations. how about this topic for the lab? Is there any one have experienced it? cheers, Heiman. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=71948t=71947 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
What is the best Practise tests to use for cisco EXAMS, CCDA,and etc.
I will be taking the cisco tests. What is the best practise tests out there for the cisco exams. There is one from boson.com, and bunch of others. Any recommendations. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]