Re: Bandwidth restrictions on serial ports [7:26188]
Do a search for CAR (committed access rate) on CCO, and police traffic based on an ACL. Vajira Wijesinghe wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello Group, We have a small ISP which gives few 128k Leased lines (ppp configuration) from a Cisco 3640 router. This same router also the gateway to the international pipeline. Our requirement is to RESTRICT the international line usage by the Leased line customers. Preferably we look at limiting 128k leased lines to an effective 64k from our 3640, without making it appear to the customer end. Please let me know, is there a way to do the above restriction. Thanks, Vajira Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=26190t=26188 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Committed Access Rate calculations [7:23839]
Use the following formula: average rate = x normal burst = x*0.1875 extended burst = x*0.375 ie. for an 8Mb average rate, use: rate-limit output 800 150 300 conform-action exceed-action This is detailed in the following link: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos _c/fqcprt4/qcfpolsh.htm - xtocid163302 Jon Tucker wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... rate-limit output access-group 101 2000 24000 32000 conform-action set-prec- transmit 5 exceed-action set-prec-transmit 0 rate-limit output access-group 102 1000 24000 32000 conform-action set-prec-transmit 5 exceed-action drop rate-limit output 800 16000 24000 conform-action set-prec-transmit 5 exceed-action drop I grabbed these three examples from CCO. Is there a rule for the calculation of the normal burst and maximum burst values if we are not told explicitly what those values should be? In the three examples above, only the last one had explicit values defined. These examples were found at Thanks, - Jon Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23964t=23839 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ADSL rates [7:20506]
Try this link.. http://www.cisco.com/warp/public/cc/pd/iosw/tech/carat_wp.htm Mohammed Saro wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... How can i divide a given bandwidth between leased lines and ADSL subscribers any hints or guides for dividing bandwidth among them and about the sharing ratios Best Regards, Mohamed Saro Network Engineer Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20655t=20506 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]