ARP [7:9031]
What configuration is to be done if the router (2600) ARP request is unable to determine the mac-address of the DHCP servers, whose IP address are already present as IP helper-address? On the show ARP command the hardware address states in-complete. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9031&t=9031 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ARP [7:9031]
Yes I can ping all the IP HELPER ADDRESSES Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9038&t=9031 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ARP [7:9031]
I have upgraded to 12.0 (7)XK1 from 12.0 (7)R, it is the same problem. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9072&t=9031 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ARP [7:9031]
Thanks very much Nach but am unable to open the attachment as it has two extension .zip.scr Am still unable to sort out the problem nor able to get an upgrade software to 12.1t or 12.2. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9750&t=9031 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IPX Routing [7:15713]
Thanks for the advise, it came up in time am haveing some ipx routing problems. Our company has the same standard set up by the Novell admin. guy. We have a C2621 with two interface fe0/0 and fe0/1, fe0/0 can ipx ping another host, but not fe0/1. ipx routing take the mac of 0/0, is that why? I have tired to used the ipx advertise-default-route-only on the interface, i still can't ping from fe0/1. Initial i was able to get ipx translation when I install the router with a laptop on the fe0/1. Setting up the router in the site(wan) it stop working. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16163&t=15713 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX - VERY URGENT [7:21569]
Please Help - Have configure a PIX Firewall with basic NAT. Cant get can connection through the firewall. Have set up the PING command - access-list acl_out permit icmp any any access-group acl_out in interface outside access-group acl_out in interface inside cant ping through even, keep getting this message 302010: 0 in use, 36 most used Can some one help please. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21569&t=21569 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]