re:Cisco6509 with dead modules
Olen, Please send a show version and a show module from the switch. You can send them directly to me or to the group. Thanks, Dale Date: Tue, 18 Jul 2000 13:36:37 +0200 From: Olden Pieterse [EMAIL PROTECTED] To: "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] Subject: [spam score 3.67/10.0 -pobox] Cisco6509 with dead modules [ The following text is in the "iso-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] Hi there Just quickly a question : I have a 6509 with a 48port ethernet card in it . On the front the status lights are orange If I do a show module x , then I get a status==other , all the rest are ok . I have enabled the module , put the power on and the works ! Is there anything else I can do to revive this module or can I safely assume its going to be good as a door stopper/paper weight ? Cheers Olden Pieterse MCP , CCNA , BCMSN , BSCN , BCRAN Brainbench Certified CISCO Network Implementation Specialist Technical Consultant Mobile : +27 82 410 8621 -------- Dale E Drummond [EMAIL PROTECTED] http://www.pobox.com/~dale/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: rack mount for cisco 4000
Abdul, There is a rack mount kit for the 4000 series router and switches The part number for the router rack mount kit is ACS-NPRM= The part number for the switch rack mount kit is WS-X4099= Hope this helps, Dale Date: Fri, 14 Jul 2000 14:50:47 -0400 From: "Rahman, Abdul" [EMAIL PROTECTED] To: "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] Subject: rack mount for cisco 4000 [ The following text is in the "iso-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] Is there a rack mount for a cisco 4000? If so where can i get one? Thanks in advance. A. Rahman, Ph.D. Product Engineer Digex, Inc. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ---- Dale E Drummond [EMAIL PROTECTED] http://www.pobox.com/~dale/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: DHCP and subnets
The DHCP server knows what scope to pick the ip address from by looking at the GIADDR field in the DHCP packet. When the router helpers a DHCP request to the DHCP server it populates the GIADDR address with the primary ip address of the router interface that the DHCP broadcast request was received on. When the DHCP server receives the request it looks at the GIADDR field then looks to see if it has a scope that matches the ip subnet of the address in the GIADDR fields. If it does it assigns an ip from that subnet. Hope this helps. Dale Date: Sun, 16 Jul 2000 20:35:20 -0500 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: RE: DHCP and subnets [ The following text is in the "iso-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] My 2c on this . When the DHCP broadcasts crosses the router ,it carries that routers mask and ip info across to the dhcp server ( assuming helpder is there) the DHCP server on seeing that the reqest came from that particular subnet issues an ip from a scope ...U could configure multiple scopes and combine them into one superscope to do this. Hope this helps. Cheers,Padhu -Original Message- From: whatshakin To: [EMAIL PROTECTED] Sent: 7/16/00 12:11 PM Subject: DHCP and subnets Hello folks, Please clarify this for me. Hypothetical example: Campus LAN with multiple buildings. Each building on its own vlan and with its own subnet addressing scheme. All buildings tied in to a Catalyst 5500 which has RSP doing all the inter-vlan routing. Data center using a single DHCP server with multiple scopes (one scope per vlan/subnet etc) to supply all vlans/subnets with their respective ip addresses. I want to understand how the DHCP server knows how to hand out the correct ip address from the corresponding subnet to the workstations that request them. I have come to believe that initially DHCP servers have no idea whom is requesting an address, they just hand them out to whoever asks...this is what is confusing. I understand that each Vlan needs its own gateway address where the workstations aim their broadcasts and there an ip helper-address statement in the RSP for each vlan, but I still don't understand how the DHCP server knows how to hand out the appropriate address when it has multiple scopes enabled. TIA for any clarification you can offer. ---- Dale E Drummond [EMAIL PROTECTED] http://www.pobox.com/~dale/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
