Re: Help reqd !! Appearing for CCNA 2.0 exams
Just Passed CCNA 2.0, as far as I can remember, no ATM question. I used Osborne CCNA study guide. Passing Score is high, from 1000 scale, you must have at least 866. CCNA cover only OSI Stacks, RIP, IGRP, LAN Switch. Good Luck -ivan- Real computer scientists only write specs for languages that might run on future hardware. Nobody trusts them to write specs for anything homo sapiens will ever be able to fit on a single planet. On Sun, 27 Aug 2000, Swapnil M Shah wrote: > Dear All > > I am appearing for CCNA 2.0 examination on 30th August. > I have ICND book from Cisco press but is any extra reading required or any extra >topics not covered in the ICND course book . > Also in Exam outline and Preparation guide on the Cisco site states that ATM is also >included . Are there any questions asked on ATM if yes then where can I find >appropriate material on ATM > Also if somebody can guide on what sort of questions are asked the most or what >topics are more critical and more tricky questions are asked > > Please help me out on the above mentioned issues. > --- > With Best Regards > Swapnil Shah > > > Get your FREE Email and Voicemail at Lycos Communications at > http://comm.lycos.com > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN PRI on AS5300 and Lucent PBX G3i
I try to connect ISDN PRI from quad Chann E1 AS5300 to DS1 Lucent PBX For Days, I can not make the Signalling up. On PBX they have parameter such as 1. Country Protocol : 1 - 22, or ETSI 2. Protocol Version : a or b 3. Interface Companding : alaw or mulaw 4. Idle Code : 8 bit : 0x00 until 0xFF I try to use isdn switch-type primary-net5, and on PBX ETSI. The question is there is no explanation on Cisco about protocol version, interface companding, idle code of the E1 port on router. Anybody can help me ? thanks -ivan- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Mica Modem
I would like to use AS5300 as V.110 connect server. I have AS5300 with QUAD-E1 and Modem MICA. We have successfully create the isdn pri link and the modem can connect in and out into analog call type. The problem arise when I want the connection to be a ISDN V.110. With IOS C5300-is-mz.113-9.AA1.bin, the 'show ver' command would display '30 terminal lines' but with IOS 120-4.XI1 120-5.T2, the terminal lines are gone. On 'show logging' command I see the 'MICA-5-UNKNMODEM : Unknown Modem Module ...'. What did I miss ? -ivan- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: AUX Port
Hi All, I suggest first you should make sure that the modem is having S0 register as 1. If the modem have a front panel you can check it by see the setting ANSWER=RING #1 (well, it is in the Motorola Codex 3266). If not, try to connect the modem to a PC and do hyperterminal to COM1 and then type : ats0=1 at&w at&y And then while in hyperterminal and connect to the modem, dial the modem from another computer, you should see RING on hyperterminal and then connect. Second you must make sure the modem is well connected to router. You can do this by telnet to router port 2001 and then do at at&v If there is a response then psysical connection is OK. Third do 'sh users' on router. If you see any aux line appear, then it mean the router is busy trying to find out the modem type and you must clear the line. or you can put 'modem autoconfigure discovery' command. Hope will help -ivan- David Nie wrote: > you should configure your modem to "auto answer" > > ""Austin"" <[EMAIL PROTECTED]> wrote in message > 92ssgt$rg2$[EMAIL PROTECTED]">news:92ssgt$rg2$[EMAIL PROTECTED]... > > I have a Cisco 2511 Access Server. > > I want to connect to the 2511 via Modem. I have an old Motorola 14.4 > modem. > > The aux port has the ffg config: > > > > line aux 0 > > login > > password cisco > > modem inout > > transport input all > > > > I have the phone line plugged into the Modem (where it says TO WALL) and I > > have the Parallel connector (Modem) from Cisco's console kit plugged into > > the Modem Parallel Port. Then I have a regular Cisco console cable running > > from the modem to the aux port. > > > > When I call the number it just rings and rings. The modem does not answer. > > What am I doing wrong or what am I not doing? > > All help appreciated. > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VoIP ringing tone on Caller not heared
Hiy guys, I have Problem With VoIP, we have installed VoIP between two routers and running. Problem arise is when phone A call to phone B, Phone A side did not hear a ringing tone, but phone B is actually in ringing status. Is there some issue to solve this problem ? Thanks -ivan- _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
