RE: VIP2 microcode [7:34511]
Daniel I just found out that the VIP2 is a VIP2-40 so I don't think that memory is the issue. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Daniel Cotts Sent: Wednesday, February 06, 2002 9:48 AM To: [EMAIL PROTECTED] Subject: RE: VIP2 microcode [7:34511] Long reply coming back: The following is a cut from a show diag. Note the Controller Memory Size line. In this case it most likely is a VIP2-10. Do a search on CCO for Mandatory Memory Upgrade - here is one of the finds: http://www.cisco.com/warp/public/770/fn4489_05141999.html TGN_7507sh diagbus Slot 0: Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0 Microcode Status 0x4 Master Enable, LED, WCS Loaded Board is analyzed Pending I/O Status: None EEPROM format version 1 VIP2 controller, HW rev 2.04, board revision D0 Serial number: 04378695 Part number: 73-1684-03 Test history: 0x00RMA number: 00-00-00 Flags: cisco 7000 board; 7500 compatible EEPROM contents (hex): 0x20: 01 15 02 04 00 42 D0 47 49 06 94 03 00 00 00 00 0x30: 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Slot database information: Flags: 0x4 Insertion time: 0xFF4 (7w3d ago) Controller Memory Size: 8 MBytes DRAM, 512 KBytes SRAM PA Bay 0 Information: Ethernet PA, 8 ports EEPROM format version 1 HW rev 1.14, Board revision A0 Serial number: 15355261 Part number: 73-1391-08 PA Bay 1 Information: Ethernet PA, 8 ports EEPROM format version 1 HW rev 1.12, Board revision A0 Serial number: 06632776 Part number: 73-1391-07 --Boot log begin-- Cisco Internetwork Operating System Software IOS (tm) VIP Software (SVIP-DW-M), Version 11.3(11a), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Mon 20-Sep-99 07:31 by jjgreen Image text-base: 0x60010910, data-base: 0x6016E000 --Boot log end-- -Original Message- From: Joseph Carr [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 06, 2002 12:56 AM To: [EMAIL PROTECTED] Subject: Re: VIP2 microcode [7:34511] ***END CUT FROM CONSOLE*** We also did a sh diag and saw that the board is disabled wedged and the memory amount is unknown (like before), and this time, it doesn't say the sw version (under sh cont cbus) and the microcode status is 0x5. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34666t=34511 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
aux port redial [7:34066]
I have a 2511 with a modem attached to the AUX port and I use a chat script to get the modem to dial. I have no trouble getting connected but I have to send traffic over the interface to get it to come up. So if the interface gets disconnected how can I get it come back up with issuing a ping or manually sending traffic over the line. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34066t=34066 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fw: aux port redial [7:34073]
- Original Message - From: Joe carr To: [EMAIL PROTECTED] Sent: Friday, February 01, 2002 9:26 AM Subject: aux port redial I have a 2511 with a modem attached to the AUX port and I use a chat script to get the modem to dial. I have no trouble getting connected but I have to send traffic over the interface to get it to come up. So if the interface gets disconnected how can I get it come back up with issuing a ping or manually sending traffic over the line. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34073t=34073 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fw: aux port redial [7:34082]
- Original Message - From: Joe carr To: [EMAIL PROTECTED] Sent: Friday, February 01, 2002 10:37 AM Subject: Fw: aux port redial - Original Message - From: Joe carr To: [EMAIL PROTECTED] Sent: Friday, February 01, 2002 9:26 AM Subject: aux port redial I have a 2511 with a modem attached to the AUX port and I use a chat script to get the modem to dial. I have no trouble getting connected but I have to send traffic over the interface to get it to come up. So if the interface gets disconnected how can I get it come back up with issuing a ping or manually sending traffic over the line. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34082t=34082 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE benefits [7:33871]
Does anyone know if a CCIE gets free TAC support? OR what other benefits does a CCIE receive Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33871t=33871 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fw: CCIE benefits [7:33872]
- Original Message - From: Joe Carr To: [EMAIL PROTECTED] Sent: Thursday, January 31, 2002 10:26 AM Subject: CCIE benefits Does anyone know if a CCIE gets free TAC support? OR what other benefits does a CCIE receive Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33872t=33872 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE benefits [7:33874]
Does anyone know if a CCIE gets free TAC support? OR what other benefits does a CCIE receive? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33874t=33874 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VIP2 ATM issue [7:33898]
I have a cat5000 with sup III and RSM w/VIP2 card. in the VIP card I have a songle port OC3 multimode fiber card installed. When I session into the RSM I cannot access the atm interface and it does not show up in a show int or a show run. I can see the VIP2 on the sup III as an expansion module. Can you help me? Thanks, Joe Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33898t=33898 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE starting pay [7:33899]
what would be the average starting pay for CCIE with no work experience. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33899t=33899 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE starting pay [7:33912]
haha very funny Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33912t=33912 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]