IP helper-address, domain browsing amp; NAT [7:36089]
Does anyone know of any issues using the IP helper-address and domain browsing while using NAT? I have 2 locations, CA and NJ. CA has a connection to the internet, NJ does not. CA and NJ are connected via a point-to-point link via their serial insterfaces. With the help of NATting NJ now is able to access the internet via the router in CA. My problem is that I need the servers at each location to replicate their WINS databases. To try and solve this issues I added IP Helper-adress to the serial point to point link on both side. If I remove the ip nat inside or the ip nat outside command from either the fastethernet or the serail interfaces I can broswe the domain and replicate the Wins database in either location. But the NJ location does not have internet access. What do I need to do to enable both browsing to and from either location and Internet access at both locations. Here is a copy of my config from both locations. hostname California ! enable secret ! ! ! ! ! memory-size iomem 25 ip subnet-zero ! ! ! ! interface Serial0 description Connection to ISP ip address 10.0.10.1 255.255.255.252 ip nat outside no fair-queue interface Serial1 description point to point t1 to New Jersey ip address 192.168.254.2 255.255.255.252 ip helper-address 10.0.3.40 ***Server's IP in New Jersey* no fair-queue ! interface FastEthernet0 ip address 10.0.2.1 255.255.255.0 secondary ip address xxx.xxx.xxx.155 255.255.255.248 ip nat inside speed auto ! ip nat pool local xxx.xxx.xxx.155 xxx.xxx.xxx.155 prefix-length 28 ip nat inside source list 1 pool local overload ip nat inside source static 10.0.3.40 xxx.xxx.xxx.156 extendable ip classless ip route 0.0.0.0 0.0.0.0 serial0 ip route 10.0.3.0 255.255.255.0 192.168.254.1 ip route xxx.xxx.xxx.0 255.255.255.248 192.168.254.1 no ip http server ! access-list 1 permit 10.0.2.0 0.0.0.255 ! line con 0 password line aux 0 password line vty 0 4 password ! end hostname NewJersy ! enable secret ! ! ! ! ! memory-size iomem 25 ip subnet-zero ! ! ! ! interface Serial0 description point to point t1 to California ip address 192.168.254.1 255.255.255.252 ip nat outside no fair-queue service-module t1 timeslots 1-24 ! interface FastEthernet0 ip address 10.0.3.1 255.255.255.0 secondary ip address xxx.xxx.xxx.46 255.255.255.248 ip helper-address 10.0.2.9 ***Server's IP in California* ip nat inside speed auto ! ip nat pool local xxx.xxx.xxx.46 xxx.xxx.xxx.46 prefix-length 28 ip nat inside source list 1 pool local overload ip nat inside source static 10.0.3.40 xxx.xxx.xxx.45 extendable ip classless ip route 0.0.0.0 0.0.0.0 192.168.254.2 no ip http server ! access-list 1 permit 10.0.3.0 0.0.0.255 ! line con 0 password line aux 0 password line vty 0 4 password ! end Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36089t=36089 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: dynamic VLAN [7:27006]
What version IOS do you have? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27017t=27006 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Router Simulator [7:26886]
I don't know of any free ones. But routersim is ok. Check ebay. You can get a decent router for a fair price. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27018t=26886 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCMSN practice tests? [7:25633]
I also read the BCMSN Ciscopress book and the ExamCram book. I've worked with 2900xl,3500xl, and 5500 switches. I like reading two books one technical and the other less technical book. I also like using the cramsession study guides as a final quick read before the test. 2 books + as much hands on as I can get + boson. That has never failed me. I made it a habit to ask people what they used to prepare with to get an idea of who best covers the subject. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=25731t=25633 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
1720 router with 2 T1's [7:15401]
I just want to make sure I can make this work. I have a Cisco 1720 with 2 T1 DSU/CSU's. I want one T1 will be a point-to-point connection going to another office. The second T1 will be going to my ISP. I want the point-to-point users to be able to use my ISP's internet access. I will be using Natting. I assume I can get this to work with a modified basic config. Does anyone see any speedbumps I might hit? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15401t=15401 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 1720 router with 2 T1's [7:15401]
Cheapskate is an understatement. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15414t=15401 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCDA Exam
Hey, There is nothing that I came across that adequately prepared me for the case studies. A lot of reading! I tired to draw out a map and add notes to it as I read the case study. It helped me answer a few questions without rereading the entire case study. As for the practice exams, I really like the www.boson.com test. There are a lot of free practice exams on the internet. Do a search and give them a try. For me it's the more the merrier. Sincerely, Peter Kurdziel CCNA, CCDA, MCSE, MCP+I http://www.inotez.com Cisco QA http://www.inotez.com/discus -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tariq Sent: Tuesday, January 09, 2001 5:48 AM To: [EMAIL PROTECTED] Subject: CCDA Exam Hello Everybody. I am preparing for CCDA Exam. I have passed CCNA. I heard that CCDA is very difficult exam and you have to concentrate on case studies. I am preparing from CDS (DCN) Book.. If you have a time than please send me some comments regarding this exam I will appreciate if you can share your experience with me. Moreover which practicse exams are very close to real exam I know that due to lot of case studies it is impossible to find any practicse exam which is closer than real exam. But even in this case i you know any practicse exam which is closer to your real exam than please let me know Thanks Tariq _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 2511 Flash Memory Question
There is an IOS compression utility you can try to compress the image. It's called Mzmaker. Sincerely, Peter Kurdziel CCNA, CCDA, MCSE, MCP+I http://www.inotez.com Cisco Q A http://www.inotez.com/discus -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tom Pruneau Sent: Monday, January 14, 1980 8:08 PM To: [EMAIL PROTECTED] Subject: 2511 Flash Memory Question Greetings All I have a 2511 with 4 MB of flash in it. I need to upgrade the IOS needs 7MB. I tried canabalizing another 2511 I had and adding it's 4MB to the 1st routers 4MB making what I believed to be 8MB. But when I tried to tftp the new image over I still got an error saying not enough memory, and yes I had opted to erase the flash first. When I went and looked at the flash the router saw it as two 4MB cards instead of 1 8MB. What do I need to do to get the flash blended together to act as 1 8MB? Thanks Tom Tom Pruneau Trainer Network Operations GENUITY 3 Van de Graff Drive Burlington Ma. 01803 24 Hr. Network Operations Center 800-436-8489 If you need to get a hold of me my hours are 7AM-3PM ET Mon-Fri --- This email is composed of 82% post consumer recycled data bits --- "Once in a while you get shown the light in the strangest of places if you look at it right" _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: I'm New
Connect both of them via the serial ports and then set the clocking on one of them. Sincerely, Peter Kurdziel CCNA,CCDA,MCSE,MCP+I http://www.inotez.com Cisco QA http://www.inotez.com/discus -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Peter English Sent: Sunday, October 22, 2000 7:00 PM To: [EMAIL PROTECTED] Subject: I'm New Hi all, I am just starting at this, and i have (2)two 2500s tell me how to make them talk to each other. Pet. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
anyone selling any routers?
Anyone selling any routers? Sincerely, Peter Kurdziel CCNA, CCDA, MCSE, MCP+I _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BSCN book....have you read any of these.
Building Scalable Cisco Networks (Cisco Career Certifications) Diane Teare, Catherine Paquet Trade Paperback October 12, 2000 BCSN: Building Cisco Scalable Networks (Book/CD-ROM package) Thomas M. Thomas,Tan Nam-Kee,Arjan Aelmans Hardcover September 26, 2000 Have any of you bought any of these books? Can you recommend any? Sincerely, Peter Kurdziel CCNA, CCDA, MCSE, MCP+I **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
640-503 book?
Can anyone recommend a good book for BCSN? Sincerely, Peter Kurdziel CCNA, CCDA, MCSE, MCP+I **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco WT-2772 does anyone use this?
Hey does anyone use this or have customers who use this. Im looking for some customer feed back. Sincerely, Peter Kurdziel CCNA, MCSE, MCP+I, MCP
Cisco WT-2772 does anyone use this?
Hey does anyone use this or have customers who use this. Im looking for some customer feed back. Sincerely, Peter Kurdziel CCNA, MCSE, MCP+I, MCP
3102 upgrade ?
Hey, I have a limited CCO login. I tried to get cisco/ios/11.2/11.2.23P/2500/c2500-j-l.112-23.P.bin . But I do not have the necessary rights. I have an old 3102 router with ios 9.I would like to upgrade it. Does anyone have a newer image for this router? Can someone help me out. Sincerely, Peter Kurdziel CCNA, MCSE, MCP+I, MCP ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I need an ios image
I messed up my router can someone tell me where I can get a new image? Thanks ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
temperature
Hey, Can I view the temperature of a router with show cup? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: pls hellp --syntax shown
Hey, Buy a book. The 0 and the 4 represent 5 connections you can have. Sincerely, Peter Kurdziel CCNA,MCSE,MCP+I,MCP -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sim, CT (Chee Tong) Sent: Thursday, June 08, 2000 5:51 AM To: '[EMAIL PROTECTED]'; 'Howard C. Berkowitz'; '[EMAIL PROTECTED]' Subject: pls hellp --syntax shown Dear friends What is mean the syntax below line vty 0 4 password what is the meaning of 0 and 4 does it mean that we have four line (serial + ethernet) attached to various device like modem. Any command to reset the device (eg modem) that attached to line 4, Chee Tong == De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. == The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. == ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]