You are in ROM MON mode on the switch. You need to run the suggested
commands
flash_init
load_helper
boot
once you do a flash_init and load_helper you can use the ? to see what
command are available. You will probably need to load an image onto your
switch using xmodem before it will boot properly.
""Marian Iordanescu"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi group,
>
> I have the folowing problem. have Found You the solution for this
> problem yet?
>
> C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE
> INTERIM
> SOFTWARE
> Compiled Mon 30-Apr-01 07:56 by devgoyal
> WS-C2950-24 starting...
> Base ethernet MAC Address: 00:07:84:f9:09:40
> Unable to initialize flash device at 0xBF000000 -- device not found.
> Xmodem file system is available.
> Initializing Flash...
> ...no flash filesystems found.
>
> The system has been interrupted, or encountered an error
> during initializion of the flash filesystem. The following
> commands will initialize the flash filesystem, and finish
> loading the operating system software:
>
> flash_init
> load_helper
> boot
>
> switch: dir flash:
> unable to stat flash:/: permission denied
> switch: flash_init
> Initializing Flash...
> ...no flash filesystems found.
> switch: copy xmodem: flash:c2950-c3h2s-mz.120-5.3.WC.1.bin
> Begin the Xmodem or Xmodem-1K transfer now...
> CCBB0flash:c2950-c3h2s-mz.120-5.3.WC.1.bin: permission denied
> switch:
>
>
> Thank you in advance ,
>
> Marian
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47943&t=47825
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
