RE: point to point T1 troubleshooting [7:4987]

[Mechbal, Hind (MED-DEVOTEAM)]

What is the configuration of the interface ? sh run int s2/0
just check that you have in the two sides the same keepalive and ppp
encapsulation 

-Original Message-
From: park jeongwoo [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 18, 2001 5:04 PM
To: [EMAIL PROTECTED]
Subject: point to point T1 troubleshooting [7:4987]


HI all
Have anyone troubleshooted PPP TI before?
it is leased line and ppp encapsulation.
Here is output of "sh int s2/0"

#sh int s2/0
Serial2/0 is up, line protocol is down
  Hardware is M4T
  Description: Leased Line to branch
  Internet address is 10.10.14.86/30
  MTU 1500 bytes, BW 2048 Kbit, DLY 2 usec,
 reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, crc 16, loopback not set
  Keepalive set (10 sec)
  LCP Listen
  Closed: IPCP, CDPCP
  Last input never, output 00:00:03, output hang never
  Last clearing of "show interface" counters 18:08:32
  Input queue: 0/75/0 (size/max/drops); Total output
drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max
total/threshold/drops)
 Conversations  0/1/256 (active/max active/max
total)
 Reserved Conversations 0/0 (allocated/max
allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
 0 packets input, 0 bytes, 0 no buffer
 Received 0 broadcasts, 0 runts, 2368 giants, 0
throttles
 8940 input errors, 1913 CRC, 0 frame, 6028
overrun, 0 ignored, 999 abort
 13556 packets output, 189784 bytes, 0 underruns
 0 output errors, 0 collisions, 3438 interface
resets
 0 output buffer failures, 0 output buffers
swapped out
 3672 carrier transitions DCD=up  DSR=up 
DTR=up  RTS=up  CTS=up

__
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4990&t=4987
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

OSPF process ID [7:5436]

[Mechbal, Hind (MED-DEVOTEAM)]

I tried to enable ospf on a router by given the process ID 1:
router ospf 1
I obtain the error :
Unknown routing protocol

the IOS version that I am usig is : 11.1

does any body know why ?
Thanks




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5436&t=5436
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

RE: OSPF process ID [7:5436]

[Mechbal, Hind (MED-DEVOTEAM)]

thanks for answering, this is because I'm using a 1600 router, I need to
have an image to run OSPF


-Original Message-
From: Adam Hickey [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 22, 2001 5:16 PM
To: [EMAIL PROTECTED]
Subject: Re: OSPF process ID [7:5436]


Depends on which image you are using and on which platform.

Do "router ?" and see what protocols it allows.

Adam Hickey
[EMAIL PROTECTED]
_
Before you criticize someone, make sure to walk a mile in their shoes.
That way, when you do criticize them, you're a mile away and you have their
shoes.



- Original Message -----
From: "Mechbal, Hind (MED-DEVOTEAM)" 
To: 
Sent: Tuesday, May 22, 2001 7:24 AM
Subject: OSPF process ID [7:5436]


> I tried to enable ospf on a router by given the process ID 1:
> router ospf 1
> I obtain the error :
> Unknown routing protocol
>
> the IOS version that I am usig is : 11.1
>
> does any body know why ?
> Thanks
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5545&t=5436
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]