Re: Proority Queuing [7:74254]

[Peter Retief]

It seems the earliest IOS release supporting Priority Queueing on the Cisco
828 is 12.2(8)T.

I found this using the Cisco feature navigator www.cisco.com/go/fn (requires
a Cisco login)

What IOS version are you using?

""Skarphedinsson Arni V.""  wrote in message
news:[EMAIL PROTECTED]
> Hi I am trying to configure prioryti queuing on a cisco 828 router, I can
> create the priority-list just fine, but can4t apply it to any interface,
in
> interface config mode, the priority group command is missing, any ideas on
> why that is ? and how I can work around this problem to give certan
traffic
> higher priority based on an access-list ?
> **Please support GroupStudy by purchasing from the GroupStudy Store:
> http://shop.groupstudy.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74512&t=74254
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Re: Possible Errata Additions: CCIE(TM): Cisco Certified [7:74093]

[Peter Retief]

Marco

I have found very many errata in this book.  Mostly they are easy to spot,
and there are few factual inaccuracies.

I have been through the whole book, noting errors as I have found them, but
I haven't had time to collate them yet.

Peter
""Marco P. Rodrigues""  wrote in message
news:[EMAIL PROTECTED]
> Edition
> By Rob Payne; Kevin Manweiler
>
>
> If someone is reading this book can they confirm some inconsistencies
> I've come across while reading the book. I'm currently on Chapter 7
> and I've found the following problems (at least I think they are
> problems)
>
>
> Pg 98.
>
> Paragraph Five last sentence reads:
>
> "DTE devices include terminals, PCs, routers, and bridges
> (customer-owned end node and internetworking devices) and DTE devices
> are devices such as packet switches"
>
> Shouldn't it read:
> ".. and DCE devices are devices such as packet switches"
>
> Pg. 193.
>
> Figure 6.1 Bit 46 should read U/L and not I/G as listed in bit 47.
>
> Pg. 194
>
> Figure 6.2 (Ethernet II Frame)
>
> Sync (Pattern 11) should read 2 bits and not "11 bits"
>
> Pg. 207
>
> set port duplex 2/10 full is issued in the config but the show port
> output lists the duplex speed as being half. All the other config
> changes match up with the output.
>
> Pg. 223 (Explanation of the command channel-group 1 mode desirable)
>
> Should read PAgP and not DTP.
>
>
>
> I've come across more , a few matched up with the Errata on Sybex's
> website. I just haven't been keeping track. I guess I'll start noting
> mistakes as I find them.
>
> If someone can confirm this with me I would appreciate it, and I'm
> sure the authors would too.
> **Please support GroupStudy by purchasing from the GroupStudy Store:
> http://shop.groupstudy.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74093&t=74093
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html