Re: Serial Line Protocol Problems
Hie - you should have DTE cable on one router and the other DCE - check your clock-rate on the DCE interface - you could also check the encapsulation on either intefaces, they should match bosire Albert Lu wrote: > Hi All, > > I've got a problem with the serial port of a 2500 of mine. > > I used a serial back to back cable, in order to connect 2 2500s. I know what > a normal response the 2500 should give, it should normally detect that the > interface is up (I've used no shutdown already), and then set the line > protocol to up. > > For one of the serial port, the interface and the line protocol changes to > up when I connect the two routers together. But after awhile, this is what I > get: > > 01:30:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to up > 01:31:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to down > 01:31:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to up > 01:31:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to down > 01:31:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to up > 01:32:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to down > 01:32:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to up > 01:32:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed > state > to down > > It keeps continuing. From what I can see, the line protocol keeps going up > and down periodically, however the interface is still up. > > This is what I've tried: > - Different cables. > - Different serial ports > - Changing clock rate and bandwidth > - Rebooting the router > > Could someone give me some suggestions? > > Thanks > > Albert > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Thought youd enjoy this
,I can do the translation to swahili if you need help! bosire Kelly D Griffin wrote: > Perhaps they would like to respond back to this gentleman's e-mail in > Swahili. Let's see if they can still walk with the shoe on the other foot. > > Kelly D Griffin, CCNA, CCDA > Network Engineer > Kg2 Network Design > http://www.kg2.com > > - Original Message - > From: "Chris Sees" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, February 15, 2001 12:32 PM > Subject: RE: Thought youd enjoy this > > > I think you made it clear on "who needs a clue" > > > > > > > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Lauren Child > > Sent: Thursday, February 15, 2001 12:44 PM > > To: [EMAIL PROTECTED] > > Subject: Thought youd enjoy this > > > > > > Heehee, well this gave me a laugh and I thought you guys might like it. > > > > Ive removed the name in case the person who needs a clue is around. > > > > xx wrote: > > > > > > what ro u mean > > > > > > --- Lauren Child <[EMAIL PROTECTED]> wrote: > > > > try using the internet. Youll be expected to. > > > > > > > > xx wrote: > > > > > > > > > > Dear Sir > > > > > I have mcse and ccna > > > > > now i am doing ccnp > > > > > ihope i will complete this within this month > > > > > i am from india and want to move to uk > > > > > can u tell me that i can find the job in uk eaisly > > > > or > > > > > not. > > > > > pls also let me that how much salary i can earn on > > > > the > > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > http://1cis.com > > Free E-mail Servers with unlimited mailboxes > > 1st Class Internet Solutions > > > http://1cis.com > Free E-mail Servers with unlimited mailboxes > 1st Class Internet Solutions > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what is "content distribution" ?
You could start with Cisco website http://www.cisco.com/warp/public/779/largeent/learn/technologies/content_networking/distribution.html bosire John Green wrote: > what exactly is this technology "content distribution" > ? > > how content is distributed over the internet ? > any links/info/tutorials/... etc > > __ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail - only $35 > a year! http://personal.mail.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re:
Not necessarily , DLCI, have only a local significance bosire Rizzo Damian wrote: > It was my understanding that two devices in a PVC connection had to have the > same DLCI number. Is this correct? > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: access-lists
,Hie you could start with troubleshooting the dialer. debug dialer This will give insight as to what is happening cheers bosire John Brandis wrote: > having problems applying an access list to my dialer interface. After > creating my access list, I then apply it to the interface but it does > not seem to do anything. i am also runnign NAT on this same router, does > this make for any other problems that I should be aware of. > > Thanks all > > John B > > [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Logs for the circuits Up/dpwn time
Hie enable syslog configuration on the router and have it send messages to a windows/unix syslog server on your network bosire vikas patel wrote: > Hi folks, > I have two lease cicuits of 64 Kbps and the circuits are getting worst and > worst day by day past two months and whenever i am not at my office, i > cannot log this information of the circuits up and down times. Is their any > method thru which i can view the logs for this two circuits, like how long > is these ports up and at what time the circuit went down and for what time. > One more thing the clock in my router always shows wrong time maybe about 4 > years back time and whenever i change it to current time, but whenever i > restart my router the time gets change to the one of 4 years back. How to > make this routers clock time to current time now onwards? > > Thanks in advance. > > Kind rgrds > vikas > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- _______ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: bandwidth loss!
, you'll need to traffic shape on your ethernet for your customer's source ip addres, The keyword Bandwith doesnt mean that the bandwith is set to the said limit Better still you can use rate-limit command http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/qos_c/qcpart1/qccar.htm bosire stephano mwendo wrote: > Haloo guys, > I have one problem here which is troubling me. > I have one customer connected to ethernet interface of > my router through a wireless link. > The bandwidth at the router ethernet interface is > configured at 128Kbps.To my suprise the output rate of > the port reads at sometimes 330Kbps > I have this problem because I want to connect other > customers but my bandwidth seems to be full but I am > loosing a lot of it this way. > Can anyone have a solution please. > > below is the interface description at "show int" > > > Ethernet0 is up, line protocol is up > Hardware is Lance, address is 00e0.1e42.bc84 (bia > 00e0.1e42.bc84) > Internet address is 216.x.xx.xx 255.255.255.224 > MTU 1500 bytes, BW 128 Kbit, DLY 1000 usec, rely > 255/255, load 232/255 > Encapsulation ARPA, loopback not set, keepalive set > (10 sec) > ARP type: ARPA, ARP Timeout 4:00:00 > Last input 0:00:00, output 0:00:00, output hang > never > Last clearing of "show interface" counters never > Output queue 0/40, 0 drops; input queue 0/75, 0 > drops > 5 minute input rate 106000 bits/sec, 115 packets/sec > 5 minute output rate 338000 bits/sec, 116 > packets/sec > 15399913 packets input, 1917488770 bytes, 0 no > buffer > Received 125968 broadcasts, 0 runts, 0 giants > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 > ignored, 0 abort > 0 input packets with dribble condition detected > 16692518 packets output, 2060062478 bytes, 0 > underruns > 0 output errors, 169769 collisions, 1 interface > resets, 0 restarts > 0 output buffer failures, 0 output buffers > swapped out > __ > > NB:Please help me I need to fix this problem soon > > = > * > STEPHANO MWENDO > PO BOX 8806, DAR ES SALAAM, TANZANIA. > TEL 255 22 2114053 > FAX 255 22 2118956 > MOBILE: 255 744 275559 > > __ > Do You Yahoo!? > Yahoo! Shopping - Thousands of Stores. Millions of Products. > http://shopping.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: "CDP-4-DUPLEX_MISMATCH" problem
check the port settings on Switch FastEthernet0/12, they should match what you have on your fa0, bosire Frank wrote: > i got many following alarm from my terminal,and i run"sh int fa0"and "sh > run",but i > got different result about the duplex of int fa0,which one should i believe? > how can solve the problem?(int fa0 is a port on AS5300) > > thanks, > > Frank > > 08:22:57: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on > FastEthernet0 (n > ot full duplex), with Switch FastEthernet0/12 (full duplex) > > FastEthernet0 is up, line protocol is up > Hardware is DEC21140, address is 0002.fdcd.09c7 (bia 0002.fdcd.09c7) > MTU 1500 bytes, BW 10 Kbit, DLY 100 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation ARPA, loopback not set > Keepalive set (10 sec) > Half-duplex, 100Mb/s, 100BaseTX/FX > ARP type: ARPA, ARP Timeout 04:00:00 > Last input 00:00:02, output 00:00:00, output hang never > Last clearing of "show interface" counters never > > interface FastEthernet0 > no ip address > duplex full > speed auto > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: !H
destination unreachable i.e not path to the destination network Jason yee wrote: > hi anyone knows what does the symbol !H means in > traceroute results > > __ > Do You Yahoo!? > Yahoo! Calendar - Get organized for the holidays! > http://calendar.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- ___ «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ Richard Bosire Network Engineer CCNA,CCSE AfricaOnline (k) Ltd tel +254-2-243775 fax +254-2-243762 http://www.africaonline.co.ke _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Newbie Question [7:8933]
Hie.. Well , it more than "plugging" a modem to serial interface and dialin.. You should check among other things - - wether you serial port is async or sync [ you need a physical async port for for you to attach your modem] - you 'll need to configure your router to accept CHAP or PAP dialin by creating an AAA model http://www.cisco.com/warp/public/793/access_dial/async_backup_dp.html - you can also use the AUX port ??? [ http://www.cisco.com/warp/public/793/access_dial/pppdialup.html ] CCO is your best solution cheers bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] UUnet Africa http://www.uunet.co.ke Brian Fitzpatrick wrote: > Hi, > > how do I set up a router with a dial in modem? Is it just a matter of > plugging in the serial port and connecting to an analogue line or is it way > more complex? > The moden needs to be there so that If it(Router) ever goes down, I can dial > in and bring it back up. > > Thanks in advance. > Brian Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8936&t=8933 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NTP configuration [7:9025]
Hie There are # of public NTP servers . You can get pointers from here http://www.eecis.udel.edu/~mills/ntp/servers.htm bosire Cjack wrote: > I want to config a network that consist about 17 routers. But i dont have a > atomic clock -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] UUnet Africa http://www.uunet.co.ke Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9030&t=9025 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to clear counters on a specific port. [7:9896]
Hi You can issue the clear counters command for a specific port e.g clear counters fastEthernet 0/1 cheers -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] UUnet Africa http://www.uunet.co.ke Washington Rico wrote: > Anyone know how to clear counters for a specific port. I need to clear > counters on a specific port instead of clear all the counters on the > switch. How do you do that. Switch is Cat 6500. > > Regards, > Rico > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] UUnet Africa http://www.uunet.co.ke Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9933&t=9896 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Where can I get totally free Radius software? [7:10607]
/bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] UUnet Africa http://www.uunet.co.ke Derric Gu wrote: > I can't login livingstons, is there any good and free radius server > software? > > Derric Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10619&t=10607 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Where can I get totally free Radius software? [7:10607]
oops, forgot the URL, here we go again http://www.freeradius.org/ /bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] UUnet Africa http://www.uunet.co.ke Derric Gu wrote: > I can't login livingstons, is there any good and free radius server > software? > > Derric Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10627&t=10607 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Certifications still worth anything? [7:10599]
If the issue is space, you could have something like [ see below] which fits on my business card ccn[ap], ccd[ap], ccs[ae] /bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] UUnet Africa http://www.uunet.co.ke "David L. Blair" wrote: > > With the death (or extended delay) of CCIE Design, I think that the CCDP > is > > sufficiently different that it can/should be used alongside of CCIE. > > > > CCNP on the otherhand flows directly into CCIE R&S. > > I, basically, agree with Kevin except for this. You are required to be a > MCP before a MCSE. Same goes for CBS before CBE and CNA before CNE. Now > with Cisco all bets are off. The CCNA/P or CCDA/P are mutually independent > from the CCIE (any flavor). It is redundant, but I feel if you went to the > trouble and expense why not put ALL your Cisco certifications. > > Say someone was a CCIE R&S, CCNA, CCNP, CCDA, CCDP, MCSE, CNE, and > Checkpoint CCSA. On a business card, all of that will not fit and look > right. For example, I would use: David L. Blair, CCIE, MCSE, CNE, CCSA. > The TOP certification from each certification area. On the resume I would > list them all. > > When I get my CCIE I plan to list all my certifications or least as many > that will fit on one line of a business card. The number of certifications > is also measure of where you have been and your tenure in the business. > > -- > "Through Complexity there is Simplicity, >Through Simplicity there is Complexity" > > David L. Blair - CCNP, CCNA, MCSE, CBE, A+, 3Wizard Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10841&t=10599 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Check out this CCO link [7:11029]
Chuck, Very juicy ., Chuck Larrieu wrote: > check out this CCO link - the long lost root of the Tech Notes pages > > http://www.cisco.com/public/technotes/serv_tips.shtml > > Enjoy! > > Chuck Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=11039&t=11029 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: bridge and switch [7:11656]
Hie Parky, A switch is a multiport bridge. They are both OSI layer 2 devices [ though there are switches which are layer 3 and above aware ]. For more info contact Internet Design Guide at http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2002.htm ./bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] parky chan wrote: > What is the different of the bridge and switch ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=11657&t=11656 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
0x21042 instead of 0x2142 [7:12534]
Hellos' I have a cisco 1601 router which I entered confreg 0x21042 instead of 0x2142 during password recovery. Now, when i reboot the router I am getting CCC on the console !!! Anyone come across this before cheers ./bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12534&t=12534 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 0x21042 instead of 0x2142 [7:12534]
Thanx Ayers, this worked ./bosire "Ayers, Michael" wrote: > Try this: 2104 and 2102 should look the same, but 1042 would get you 1200 > baud. Try setting your console to 1200 and see if it works > > Michael > -Original Message- > From: Richard Bosire [mailto:[EMAIL PROTECTED]] > Sent: Monday, July 16, 2001 12:59 PM > To: [EMAIL PROTECTED] > Subject:0x21042 instead of 0x2142 [7:12534] > > Hellos' > > I have a cisco 1601 router which I entered confreg 0x21042 instead of > 0x2142 during password recovery. > Now, when i reboot the router I am getting > CCC on the console !!! > > Anyone come across this before > cheers > ./bosire > > -- > _______ > +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ > > richard bosire > ccn[ap], ccd[ap], ccs[ae] > Privileged/Confidential Information may be contained in this message or > attachments hereto. Please advise immediately if you or your employer do > not consent to Internet email for messages of this kind. Opinions, > conclusions and other information in this message that do not relate to the > official business of this company shall be understood as neither given nor > endorsed by it. -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12676&t=12534 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OT: Tools for disk space/cpu/memory utilization. [7:13464]
Hie Get hold of cricket, should be able to meet some of your needs http://cricket.sourceforge.net/ ./bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] Ryan Ngai Hon Kong wrote: > Sorry, this is a little bit off the topic. > > Does anybody have recommendation tools to monitor the server disk space, CPU > or memory > utilization? I believe HP NNM have similar feature whereby the server is > running on SNMP daemon. > Can I use some similar tools to access to the mibs in the server? > > Regards, > Ryan Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13469&t=13464 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: default route problem [7:14118]
Hie You'll have the make the DR announce the default route. Include the following command in your DR's router ospf configuration default-information originate always ./bosire --- +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] Mohammed Saro wrote: > i have a problem when i configured OSPF on my system and make redistribution > for the static routes all routes are transmitted except the default route so > when u write sh ip orute 0.0.0.0 any where else u find that Network not in > the > table how comes that all static routes are exchanged except the default route > ? > > Best Regards, > Mohammed Saro > Network Engineer Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14123&t=14118 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Class C IP range! [7:26814]
Shella, Your upstream provider [ ISP/NSP] should be able to provide you with this . ./bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] shella kevin wrote: > where can i get a class C ip address block ? I check everywhere > everyone is saying they only provide a block of /19. > > Anyone can help ? > > Thanks > > Shella > > >From: "Jason" >Reply-To: "Jason" >To: [EMAIL PROTECTED] >Subject: Re: > Cisco TACACS+ Problem [7:26783] >Date: Tue, 20 Nov 2001 01:17:38 -0500 > > >Without a config or anything.?? > > > wrote in message > >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I have configured a > number of routers to authenticate to the TACACS+ > > server we have on > site. some routers get the login prompt and some dont > > and at time > others do. > > > > Has anyone got any ideas to this. > > > > *** Thomas > Jreige > > *** Communications Engineer > > *** CSC Network Services, > misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26829&t=26814 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Restrict remote users access to corporate netw [7:27759]
Hello David You'll need to make use AAA in your configuration. Refer to http://www.cisco.com/warp/customer/707/index.shtml ( CCO login required ) ./bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] David Tran wrote: > Hi Everyone, > > Perhaps someone in the group can help me with this problem. > I have Cisco Pix515-UR (128MB RAM/16MB Flash) running PIX > code 6.1(1) with Pix Device Manager (PDM) version 1.1(2). This > PIX is connected to my cable modem with STATIC IP address > 129.174.1.13 on the outside interface. The inside interface > (which is my internal network) has an IP of 192.168.1.1 > with a netmask of 255.255.255.0. On the internal network, I have > a BSD box (IP 192.168.1.10), a Linux box (192.168.1.20), a > Solarisx86 (IP 192.168.1.30) and a SCO Unix with IP 192.168.1.40 > > I have successfully implemented VPN connection for remote users > using Cisco VPN client 3.1.1 running on Win98, NT, 2000 and Linux > to connect to the internal network. Once these remote users are > successfully connected, they can access all the devices on the > internal network. > > I have 2 questions: > > 1) Let say that I just want remote users to access just the BSD box > and the Linux box but not the Solaris and SCO, how can I make this > happen? I know how to do that with Checkpoint Secure Remote > (Checkpoint use Encryption domain which specify which devices > remote user is allowed to access). How can I accomplish this > in PIX? For example, I just want remote users to ping the BSD > and Linux boxes but not Solaris and SCO boxes. > > 2) I have 4 different remote users who connect to the internal network > via VPN IPSec connection. All of these users are using the same account > (vpn3000) to connect back to the network. From a Security stand point, this > is > bad practices. How can I assign each of these users different account in > the configuration? Again, I know how to do this with Checkpoint; however, > I don't know how to get it done in PIX. > > Below is the configuration. Please help. thanks. > > PIX Version 6.1(1) > nameif ethernet0 outside security0 > nameif ethernet1 inside security100 > enable password OnTrBUG1Tp0edmkr encrypted > passwd 2KFQnbNIdI.2KYOU encrypted > hostname goss-d3-pix515b > domain-name micronetsolution.com > fixup protocol ftp 21 > fixup protocol http 80 > fixup protocol h323 1720 > fixup protocol rsh 514 > fixup protocol smtp 25 > fixup protocol sqlnet 1521 > fixup protocol sip 5060 > fixup protocol skinny 2000 > names > ! > !--- Access-list to avoid Network Address Translation (NAT) on the IPSec > packets > access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 > 255.255.255.0 > pager lines 24 > interface ethernet0 auto > interface ethernet1 auto > mtu outside 1500 > mtu inside 1500 > ! > !--- IP addresses on the interfaces > ip address outside 129.174.1.13 255.255.240.0 > ip address inside 192.168.1.1 255.255.255.0 > ip audit info action alarm > ip audit attack action alarm > ip local pool ippool 192.168.2.1-192.168.2.254 > no failover > failover timeout 0:00:00 > failover poll 15 > failover ip address outside 0.0.0.0 > failover ip address inside 0.0.0.0 > pdm history enable > arp timeout 14400 > ! > !--- Binding ACL 101 to the NAT statement to avoid NAT on the IPSec packets > nat (inside) 0 access-list 101 > ! > !--- Default route to the Internet > route outside 0.0.0.0 0.0.0.0 129.174.1.1 1 > timeout xlate 3:00:00 > timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 > 0:05:00 sip 0:30:00 sip_media 0:02:00 > timeout uauth 0:05:00 absolute > aaa-server TACACS+ protocol tacacs+ > aaa-server RADIUS protocol radius > http server enable > http 192.168.1.0 255.255.255.0 inside > no snmp-server location > no snmp-server contact > snmp-server community public > no snmp-server enable traps > floodguard enable > ! > !--- The sysopt command avoids conduit on the IPSec encrypted traffic > sysopt connection permit-ipsec > no sysopt route dnat > ! > !--- Phase 2 encryption type > crypto ipsec transform-set myset esp-des esp-md5-hmac > crypto dynamic-map dynmap 10 set transform-set myset > crypto map mymap 10 ipsec-isakmp dynamic dynmap > ! > !--- Binding the IPSec engine on the outside interface > crypto map mymap interface outside > ! > !--- Enabling ISAKMP key-exchange > isakmp enable outside > isakmp identity address > ! > !--- ISAKMP Policy for 3000 VPN client running 3.0 or higher code >
Re: throttles and input drops [7:46406]
If you didn't get a solution , there is an issue with i82543, I got this from some gentleman @cisco.com " CSCdv33209 lots of throttles on the FE interface of C7200-I/O-2FE/E is DUPed to CSCdu09746 Add support for dynamic particle pools to i82543 GE/FE/E driver which is resolved in 12.0(18.3)S. 12.0(21)S3 looks like the latest. The fix is to make the interface pool management dynamic; it was static. " cheers ./bosire cj jung wrote: >Check to see if you are doing process switching on this router. >or >Check the buffers on your router, >This error comes out normally when you are doing process switching for debug >and buffer is full. > >jin jung >CCNP, CCDP,, > >- Original Message - >From: "rmart." >To: >Sent: Wednesday, June 12, 2002 10:36 PM >Subject: throttles and input drops [7:46406] > > > > >>Hi, >> >>My router, cisco 7000 series having problem with a number of throttles and >>input drops on one of the FastEth interface. >>cpu utilization seems ok (below 5%). >> >>below is the output of sh int : >> >>FastEthernet0/1 is up, line protocol is up >> Hardware is i82543 (Livengood), address is 0004.9b6e.c406 (bia >>0004.9b6e.c406) >> Description: used by sub-interfaces >> Internet address is 212.194.2.3/23 >> MTU 1500 bytes, BW 10 Kbit, DLY 100 usec, rely 255/255, load 5/255 >> Encapsulation ARPA, loopback not set >> Keepalive set (10 sec) >> Full-duplex, 100Mb/s, 100BaseTX/FX >> ARP type: ARPA, ARP Timeout 04:00:00 >> Last input 00:00:00, output 00:00:00, output hang never >> Last clearing of "show interface" counters 23:03:59 >> Queueing strategy: fifo >> Output queue 0/40, 0 drops; input queue 0/75, 869280 drops >> 30 second input rate 3313000 bits/sec, 738 packets/sec >> 30 second output rate 226 bits/sec, 744 packets/sec >> 42338355 packets input, 3700449939 bytes >> Received 0 broadcasts, 0 runts, 0 giants, 1307541 throttles >> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored >> 0 watchdog, 0 multicast >> 0 input packets with dribble condition detected >> 43216540 packets output, 1919733782 bytes, 0 underruns >> 0 output errors, 0 collisions, 0 interface resets >> 0 babbles, 0 late collision, 0 deferred >> 0 lost carrier, 0 no carrier >> 0 output buffer failures, 0 output buffers swapped out >> >>any ideas? >>Thanks. >> >>Rey Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46880&t=46406 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
: ACC Tigris [7:26351]
I am looking for an equivalent mailing list for former ACC Tigris Routers/Software and now part of Ericsson's Datacom products in regards to bgp configuration and implemenation. I have done a numerous searches and nothing specific is showing up. Any links, urls will be apreciated cheers ./.bosire -- ___ +$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$;'+$;%+$ richard bosire ccn[ap], ccd[ap], ccs[ae] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26351&t=26351 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
