"Bridge Number" defined on Cat 3920 [7:39863]
> Hi, > > Does the "Bridge Number" showed on the Cat 3920 > under > the "VLAN parameter configuration for TrBRF" has any > relationship with the "bridge-number" defined in the > "source-bridge" on the router Token Ring interface? > > > Thanks in advance. > > Regards. > > __ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards. http://movies.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39863&t=39863 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Where is "h323" used when configuring IVR for Voice? [7:39145]
> > Hi, > > > > From the Cisco web site > > > "http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c/vvfivr.htm#xtocid14"; > > > > > > > > The example showed that "aaa authentication login > > h323 > > group radius". The "h323" is indicated in the > > command > > reference as the "list-name". But I could not find > > the > > list-name "h323" being used in the configuration > > below. Where is the "h323" being reference in the > > configuration ? When using IVR how the application > > knows that the router should use the list-name > > "h323" > > to authenticate the user ? Thank-you. > > > > > > > > TCL IVR for Gateway1 (GW1) Configuration Example > > The following output is the result of using the > show > > running-config command: > > > > GW1 > > Router# show running-config > > > > > > Building configuration... > > > > Current configuration: > > > > ! Last configuration change at 08:39:29 PST Mon > Jan > > 10 > > 2000 by lab > > ! > > version 12.2 > > service timestamps debug datetime msec > > service timestamps log datetime msec > > no service password-encryption > > ! > > hostname GW1 > > ! > > logging buffered 10 debugging > > aaa new-model > > aaa authentication login default local group > radius > > aaa authentication login h323 group radius > > aaa authentication login con none > > aaa authorization exec h323 group radius > > aaa accounting connection h323 start-stop group > > radius > > enable password xxx > > ! > > username lab password 0 lab > > ! > > resource-pool disable > > ! > > clock timezone PST -8 > > ip subnet-zero > > ip host baloo 1.14.124.xxx > > ip host dirt 223.255.254.254 > > ip host rtspserver3 1.14.1xx.2 > > ip host rtspserver1 1.14.1xx.2 > > ! > > mgcp package-capability trunk-package > > mgcp default-package trunk-package > > isdn switch-type primary-net5 > > isdn voice-call-failure 0 > > ! > > tftp://dirt/hostname/WV/en_new/ > > call application voice debit_card > > tftp://dirt/Router/scripts.new/app_debitcard.tcl > > call application voice debit_card uid-len 6 > > call application voice debit_card language 1 en > > call application voice debit_card language 2 ch > > call application voice debit_card set-location ch > 0 > > tftp://dirt/hostname/WV/ch_new/ > > call application voice debit_card set-location en > 0 > > tftp://dirt/hostname/WV/en_new/ > > call application voice debit_card_rtsp > > tftp://dirt/IVR > > 2.0/scripts.new/app_debitcard.tcl > > call application voice debit_card_rtsp uid-len 6 > > call application voice debit_card_rtsp language 1 > en > > call application voice debit_card_rtsp language 2 > ch > > call application voice debit_card_rtsp > set-location > > ch > > 0 rtsp://rtspserver1:554/ > > call application voice debit_card_rtsp > set-location > > en > > 0 rtsp://rtspserver1:554/ > > > > mta receive maximum-recipients 0 > > ! > > controller E1 0 > > clock source line primary > > pri-group timeslots 1-31 > > ! > > controller E1 1 > > ! > > controller E1 2 > > ! > > controller E1 3 > > ! > > gw-accounting h323 > > gw-accounting h323 vsa > > gw-accounting voip > > ! > > interface Ethernet0 > > ip address 1.14.128.35 255.255.255.xxx > > no ip directed-broadcast > > h323-gateway voip interface > > h323-gateway voip id gk1 ipaddr 1.14.128.19 1xxx > > h323-gateway voip h323-id [EMAIL PROTECTED] > > h323-gateway voip tech-prefix 5# > > ! > > interface Serial0:15 > > no ip address > > no ip directed-broadcast > > isdn switch-type primary-net5 > > isdn incoming-voice modem > > > > fair-queue 64 256 0 > > no cdp enable > > ! > > interface FastEthernet0 > > ip address 16.0.0.1 255.255.xxx.0 > > no ip directed-broadcast > > duplex full > > speed auto > > no cdp enable > > ! > > ip classless > > ip route 0.0.0.0 0.0.0.0 1.14.128.33 > > ip route 1.14.xxx.0 255.xxx.255.xxx 16.0.0.2 > > ip route 1.14.xxx.16 255.xxx.255.240 1.14.xxx.33 > > no ip http server > > ! > > radius-server host 1.14.132.2 auth-port 1645 > > acct-port > > 1646 > > radius-server key cisco > > radius-server vsa send accounting > > radius-server vsa send authentication > > ! > > voice-port 0:D > > cptone DE > > ! > > dial-peer voice 200 voip > > incoming called-number 53 > > destination-pattern 34. > > session target ipv4:16.0.0.2 > > dtmf-relay h245-alphanumeric > > codec g711ulaw > > ! > > dial-peer voice 102 pots > > application debit_card_rtsp > > incoming called-number 3450072 > > shutdown > > destination-pattern 53. > > port 0:D > > ! > > dial-peer voice 202 voip > > shutdown > > destination-pattern 34. > > session protocol sipv2 > > session target ipv4:16.0.0.2 > > dtmf-relay cisco-rtp > > codec g711ulaw > > ! > > dial-peer voice 101 pots > > application debit_card > > incoming called-number 3450070 > > destination-pattern 53. > > port 0:D > > ! > > gateway > > ! > > line con 0 > > exec-timeout 0 0 > > transport input none > > line aux 0 > > line vty 0 4 > > password xxx > > ! > > ntp clo
Where is "h323" used when configuring IVR for Voice? [7:39011]
> Hi, > > From the Cisco web site > "http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c/vvfivr.htm#xtocid14"; > > > > The example showed that "aaa authentication login > h323 > group radius". The "h323" is indicated in the > command > reference as the "list-name". But I could not find > the > list-name "h323" being used in the configuration > below. Where is the "h323" being reference in the > configuration ? When using IVR how the application > knows that the router should use the list-name > "h323" > to authenticate the user ? Thank-you. > > > > TCL IVR for Gateway1 (GW1) Configuration Example > The following output is the result of using the show > running-config command: > > GW1 > Router# show running-config > > > Building configuration... > > Current configuration: > > ! Last configuration change at 08:39:29 PST Mon Jan > 10 > 2000 by lab > ! > version 12.2 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname GW1 > ! > logging buffered 10 debugging > aaa new-model > aaa authentication login default local group radius > aaa authentication login h323 group radius > aaa authentication login con none > aaa authorization exec h323 group radius > aaa accounting connection h323 start-stop group > radius > enable password xxx > ! > username lab password 0 lab > ! > resource-pool disable > ! > clock timezone PST -8 > ip subnet-zero > ip host baloo 1.14.124.xxx > ip host dirt 223.255.254.254 > ip host rtspserver3 1.14.1xx.2 > ip host rtspserver1 1.14.1xx.2 > ! > mgcp package-capability trunk-package > mgcp default-package trunk-package > isdn switch-type primary-net5 > isdn voice-call-failure 0 > ! > tftp://dirt/hostname/WV/en_new/ > call application voice debit_card > tftp://dirt/Router/scripts.new/app_debitcard.tcl > call application voice debit_card uid-len 6 > call application voice debit_card language 1 en > call application voice debit_card language 2 ch > call application voice debit_card set-location ch 0 > tftp://dirt/hostname/WV/ch_new/ > call application voice debit_card set-location en 0 > tftp://dirt/hostname/WV/en_new/ > call application voice debit_card_rtsp > tftp://dirt/IVR > 2.0/scripts.new/app_debitcard.tcl > call application voice debit_card_rtsp uid-len 6 > call application voice debit_card_rtsp language 1 en > call application voice debit_card_rtsp language 2 ch > call application voice debit_card_rtsp set-location > ch > 0 rtsp://rtspserver1:554/ > call application voice debit_card_rtsp set-location > en > 0 rtsp://rtspserver1:554/ > > mta receive maximum-recipients 0 > ! > controller E1 0 > clock source line primary > pri-group timeslots 1-31 > ! > controller E1 1 > ! > controller E1 2 > ! > controller E1 3 > ! > gw-accounting h323 > gw-accounting h323 vsa > gw-accounting voip > ! > interface Ethernet0 > ip address 1.14.128.35 255.255.255.xxx > no ip directed-broadcast > h323-gateway voip interface > h323-gateway voip id gk1 ipaddr 1.14.128.19 1xxx > h323-gateway voip h323-id [EMAIL PROTECTED] > h323-gateway voip tech-prefix 5# > ! > interface Serial0:15 > no ip address > no ip directed-broadcast > isdn switch-type primary-net5 > isdn incoming-voice modem > > fair-queue 64 256 0 > no cdp enable > ! > interface FastEthernet0 > ip address 16.0.0.1 255.255.xxx.0 > no ip directed-broadcast > duplex full > speed auto > no cdp enable > ! > ip classless > ip route 0.0.0.0 0.0.0.0 1.14.128.33 > ip route 1.14.xxx.0 255.xxx.255.xxx 16.0.0.2 > ip route 1.14.xxx.16 255.xxx.255.240 1.14.xxx.33 > no ip http server > ! > radius-server host 1.14.132.2 auth-port 1645 > acct-port > 1646 > radius-server key cisco > radius-server vsa send accounting > radius-server vsa send authentication > ! > voice-port 0:D > cptone DE > ! > dial-peer voice 200 voip > incoming called-number 53 > destination-pattern 34. > session target ipv4:16.0.0.2 > dtmf-relay h245-alphanumeric > codec g711ulaw > ! > dial-peer voice 102 pots > application debit_card_rtsp > incoming called-number 3450072 > shutdown > destination-pattern 53. > port 0:D > ! > dial-peer voice 202 voip > shutdown > destination-pattern 34. > session protocol sipv2 > session target ipv4:16.0.0.2 > dtmf-relay cisco-rtp > codec g711ulaw > ! > dial-peer voice 101 pots > application debit_card > incoming called-number 3450070 > destination-pattern 53. > port 0:D > ! > gateway > ! > line con 0 > exec-timeout 0 0 > transport input none > line aux 0 > line vty 0 4 > password xxx > ! > ntp clock-period 17180740 > ntp server 1.14.42.23 > end > > > > __ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards. http://movies.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39011&t=39011 -- FAQ, list archives, and subscription info: http://www.
Where to find "Protocol Type Code" in Cisco CD ? [7:38763]
> Hi, > > I tried searching the Cisco CD for the table of > "Protocol Type Code" used in Source Route Bridge > administrative filter, but could not find any of the > table. Can someone indicate to me where to find it > in > Cisco CD? > > What I need is a table for example: > > 8137-8138 Novell > 80D5IBM SNA Service over Ethernet > > Thank-you. > > > > = > Thank-you. > Regards, > Paul > __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38763&t=38763 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Where to find "Protocol Type Code" in Cisco CD ? [7:38213]
Hi, I tried searching the Cisco CD for the table of "Protocol Type Code" used in Source Route Bridge administrative filter, but could not find any of the table. Can someone indicate to me where to find it in Cisco CD? What I need is a table for example: 8137-8138 Novell 80D5IBM SNA Service over Ethernet Thank-you. = Thank-you. Regards, Paul __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38213&t=38213 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Where is "h323" used when configuring IVR for Voice? [7:38211]
Hi, >From the Cisco web site "http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c/vvfivr.htm#xtocid14"; The example showed that "aaa authentication login h323 group radius". The "h323" is indicated in the command reference as the "list-name". But I could not find the list-name "h323" being used in the configuration below. Where is the "h323" being reference in the configuration ? When using IVR how the application knows that the router should use the list-name "h323" to authenticate the user ? Thank-you. TCL IVR for Gateway1 (GW1) Configuration Example The following output is the result of using the show running-config command: GW1 Router# show running-config Building configuration... Current configuration: ! Last configuration change at 08:39:29 PST Mon Jan 10 2000 by lab ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname GW1 ! logging buffered 10 debugging aaa new-model aaa authentication login default local group radius aaa authentication login h323 group radius aaa authentication login con none aaa authorization exec h323 group radius aaa accounting connection h323 start-stop group radius enable password xxx ! username lab password 0 lab ! resource-pool disable ! clock timezone PST -8 ip subnet-zero ip host baloo 1.14.124.xxx ip host dirt 223.255.254.254 ip host rtspserver3 1.14.1xx.2 ip host rtspserver1 1.14.1xx.2 ! mgcp package-capability trunk-package mgcp default-package trunk-package isdn switch-type primary-net5 isdn voice-call-failure 0 ! tftp://dirt/hostname/WV/en_new/ call application voice debit_card tftp://dirt/Router/scripts.new/app_debitcard.tcl call application voice debit_card uid-len 6 call application voice debit_card language 1 en call application voice debit_card language 2 ch call application voice debit_card set-location ch 0 tftp://dirt/hostname/WV/ch_new/ call application voice debit_card set-location en 0 tftp://dirt/hostname/WV/en_new/ call application voice debit_card_rtsp tftp://dirt/IVR 2.0/scripts.new/app_debitcard.tcl call application voice debit_card_rtsp uid-len 6 call application voice debit_card_rtsp language 1 en call application voice debit_card_rtsp language 2 ch call application voice debit_card_rtsp set-location ch 0 rtsp://rtspserver1:554/ call application voice debit_card_rtsp set-location en 0 rtsp://rtspserver1:554/ mta receive maximum-recipients 0 ! controller E1 0 clock source line primary pri-group timeslots 1-31 ! controller E1 1 ! controller E1 2 ! controller E1 3 ! gw-accounting h323 gw-accounting h323 vsa gw-accounting voip ! interface Ethernet0 ip address 1.14.128.35 255.255.255.xxx no ip directed-broadcast h323-gateway voip interface h323-gateway voip id gk1 ipaddr 1.14.128.19 1xxx h323-gateway voip h323-id [EMAIL PROTECTED] h323-gateway voip tech-prefix 5# ! interface Serial0:15 no ip address no ip directed-broadcast isdn switch-type primary-net5 isdn incoming-voice modem fair-queue 64 256 0 no cdp enable ! interface FastEthernet0 ip address 16.0.0.1 255.255.xxx.0 no ip directed-broadcast duplex full speed auto no cdp enable ! ip classless ip route 0.0.0.0 0.0.0.0 1.14.128.33 ip route 1.14.xxx.0 255.xxx.255.xxx 16.0.0.2 ip route 1.14.xxx.16 255.xxx.255.240 1.14.xxx.33 no ip http server ! radius-server host 1.14.132.2 auth-port 1645 acct-port 1646 radius-server key cisco radius-server vsa send accounting radius-server vsa send authentication ! voice-port 0:D cptone DE ! dial-peer voice 200 voip incoming called-number 53 destination-pattern 34. session target ipv4:16.0.0.2 dtmf-relay h245-alphanumeric codec g711ulaw ! dial-peer voice 102 pots application debit_card_rtsp incoming called-number 3450072 shutdown destination-pattern 53. port 0:D ! dial-peer voice 202 voip shutdown destination-pattern 34. session protocol sipv2 session target ipv4:16.0.0.2 dtmf-relay cisco-rtp codec g711ulaw ! dial-peer voice 101 pots application debit_card incoming called-number 3450070 destination-pattern 53. port 0:D ! gateway ! line con 0 exec-timeout 0 0 transport input none line aux 0 line vty 0 4 password xxx ! ntp clock-period 17180740 ntp server 1.14.42.23 end __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38211&t=38211 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Catalyst 3920 token ring switch [7:12467]
Hi, Can anyone let me know the steps to configure the Catalyst 3920 for IP management, so that the Catalyst 3920 can be managed from one of the token rings ? Thank-you. __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12467&t=12467 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]