Re: Priority setting on 3548s [7:36772]
Set it to "5". ""Thomas"" wrote in message news:[EMAIL PROTECTED].; > Hi All - I would like to enable priority on ports of Cisco Catalyst 3548 > switches for real-time traffic such as VoIP. There are 8 level of priority > (0-7), which one is the highest priority? The smaller the higher priority? > or vice versa? For VoIP and Video over IP, what priority level should I > choose? Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36798&t=36772 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Toronto Guys: CCIE Preparation group [7:36506]
Hi All, Toronto guys, Planning to prepare for CCIE lab, let's form a group.Advantages, u all know. Thanks, Sunil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36506&t=36506 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX 520 ---no console access [7:36138]
Why replace RAM and not Flash or Both ? Sunil ""Thom Castognalia"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sunil - Open up the PIX. Remove the flash card and the RAM. Re-install the > flash card and the RAM. See if that does the trick. If not, replace the RAM. > > TC Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36171&t=36138 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX 520 ---no console access [7:36138]
Hi All, I recently upgraded Flash and RAM on a Cisco PIX 520 and it worked fine for a week.After a week or so in production it suddenly stopped , rebooted but no luck, I could not even console into it.What happend is after some time I had the console access again and everything is fine, no errors.Its behaviour is intermittent. One thing I also noticed is that when I don't have console access, It doesn't check the floppy drive which it normally does. Any sugessions? Sunil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36138&t=36138 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]