Re: BGP **** CCO QUESTION ** PA
What are the links to those CCO tests? BTW, I have CCO access. Thanks a lot. ""Peter Abraham"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > All these are questions that I got from the CCO BCSN tests. > > 1. Which command allows Router A to advertise subnet 10.1.0.0/24 in BGP? > > A. network 10.1.0.0 > B. network 10.1.0.0 255.255.0.0 > C. network 10.1.0.0 mask 255.255.0.0 > D. network 10.1.0.0/16 > E. network 10.1.0.0 prefix 16 > > I have my answer as A. B,D, and E all have the wrong syntax. Is C right? I > know that the mask length for C is 16. > > 2. What is the function of the BGP atomic aggregate attribute? > > A. To indicate that the originating router has aggregated the routes > B. To specify the BGP router ID and AS number of the router that performed > the route aggregation > C. To specify the AS number of the router that performed the route > aggregation > D. To specify the AS number of the router that performed the route > aggregation and the AS numbers of the non-aggregated routes > > Answer: A. > > I have searched the CISCO web site and cannot find information on BGP atomic > aggregate attribute. > > Finally, how do prefix lists have support for incremental updates? Does > anyone have a simple explanation for this? > > I appreciate your assistance. > > Peter. > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN exam
I just finished the test yesterday. Only basic Multicast questions were asked, for example, translate a multicast IP address into a MAC address, what charactristics make Multicast different to Unicast and Broadcast, basic IGMP features. The questions about MLS were also simple, few HSRP questions were asked. Most parts of the exam were about VLAN, Trunking, VTP and STP. I was weak in VLAN since I used Cisco Press BCMSN book which doesn't declare VLAN, and VTP very clearly. I suggest you look for other materials for the VLAN part. "Jon Kuhn" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > How in depth are the Multicast questions on the exam?How many can I > expect? > > Thanks, > Jon > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: T Thomas BSCN, BCMSN - VERY POOR
> I agree that Ciscopress books are better than other publishers I've seen. > When I was studying for CCNA I bought a book by Global Knowledge titled > "CCNA test yourself practice exams". This book was terrible. Many, many > errors. The Cisco books I've used seem very well put together and at least > edited. Generally speaking, Cisco books are better. But not all of them. I don't the BCRAN book from Ciscopress is good one, there are many mistakes. On the other side, dispite the mistakes, it's a good book for exam since it includes all the concepts might be tested. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: disconnectign telnet sessions
First, put in "show user" to see in which lines the users telnet in. In this way you also get ip addresses from which all the users conncect in order to distinguish you from other users. Second, type "clear line xx" to disconnect other user, where xx is the his(her) line number. > Is there a way to disconnect users that are telneted into a router without > disconnecting yourself. Specifically on a 2500 series running IOS 12.0 (5)T. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BSCN questions
Hi group, I have taken an Cisco BSCN on-line test , there a several questions I'm not sure the answers. Can you give the answers and reasons for them? Note, about every question, there's only one answer. '*' present my wrong choice. Thanks a lot. Question 1 of 72. Which command can be used to determine the state of a BGP connection? A. show ip bgp *B. show ip bgp summary C. show ip bgp origin D. show ip bgp neighbors E. show ip bgp state Question 11 of 72. Which benefit does VLSM provide in multi-area OSPF networks? * A. Implementation of a hierarchical design B. Efficient address allocation within an area C. Support for discontiguous subnets D. Overrides the need for route summarization Question 15 of 72. On Cisco routers, the OSPF router ID . A. is the highest IP address on an active interface B. is the lowest IP address on an active interface *C. may be used during the DR and BDR election process D. answers a and c E. answers b and c Question 16 of 72. When using Enhanced IGRP in large scalable networks, why is additional EIGRP configuration required? *A. to be hierarchical B. to adjust only WAN bandwidth because EIGRP is preconfigured (Plug and Play) C. to be monitored by the administrator D. to create manually entered summary routes Question 21 of 72. For an OSPF network operating in NBMA mode, which statement about becoming neighbors is true? A. Partial mesh and hub and spoke topologies are supported B. Neighbors will be dynamically learned *C. Separate subnets assist with the location of neighboring routers D. DR/BDR will be elected if more than two routers exist on the Frame Relay network Question 29 of 72. In Frame Relay pure multipoint topologies, manual configuration of bandwidth should be equal to _. A. the lowest CIR value B. the sum of all the CIRs * C. the product of the lowest CIR multiplied by the number of circuits D. the average CIR for all of the circuits Question 39 of 72. Which statement is true about any route redistributed into BGP? *A. It must already be known in the IP routing table. B. It must be aggregated by the BGP router. C. It will automatically be put in the IP routing table. D. It will be preferred over routes learned with the network command. Question 41 of 72. Which is NOT a benefit of manual route summarization in EIGRP networks? A. Smaller routing tables *B. Boundaries for query packets C. More rapid convergence D. A route to the null interface Question 46 of 72. Which information is included in an OSPF link-state database? A. the best paths a router can use B. the entire internetwork topology * C. a router's directly connected links D. a router's directly connected neighbors Question 49 of 72. Configuring the ip default-network command on a Cisco router running the RIP routing protocol _. A. causes a default route to be inserted in the routing table of that router B. causes a default route to be sent to the router's neighbors *C. causes a default route to be inserted in the routing table of that router and to be sent to the router's neighbors D. does nothing, since the RIP protocol communicates all routes with the neighbor routers Question 56 of 72. Which statement about OSPF operation in multiple areas is NOT true? A. SPF calculations are reduced B. Routing table size is reduced * C. Convergence time is reduced D. Different LSA types are required 58 A router running which protocol(s) will automatically summarize its own routes? A. OSPF, EIGRP, and BGP B. OSPF and EIGRP *C. EIGRP and BGP D. OSPF E. EIGRP 66 An optional transitive BGP attribute _. A. must be recognized by all BGP implementations *B. must be present in all BGP update messages C. does not need to be in all BGP update messages D. is marked as partial if not recognized by a BGP implementation E. is discarded if not recognized by a BGP implementation Question 72 of 72. The Internet uses a _. A. hop-by-hop routing paradigm B. cost-by-cost routing paradigm C. hop-by-cost routing paradigm * D. paradigm that allows an AS to send traffic to a neighboring AS, so that the traffic takes a different route from that taken by traffic originating in the neighboring AS _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How to pronounce?l
Can anyone tell how to pronounce the words TACACS, RADIUS? Anywhere can I find the pronounciation of all those abbreviations? Thanks. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP exam sequence?
I'm preparing to take the Remote Access exam for the first exam of my CCNP track. Do I need to take the Routing test first or take whatever exam I like to be the first? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Practice questions for BCRAN
I'm attending the BCRAN test in several days. I want more practice for it but there are few questions available for me. Can anyone send some for me? Thanks ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Practice questions for BCRAN
Thank you very much. I understand both english and chinese. ""cslx"" <[EMAIL PROTECTED]> wrote in message 8p50l3$5bh$[EMAIL PROTECTED]">news:8p50l3$5bh$[EMAIL PROTECTED]... > please tell me which country are you in now,do you know chinese,I will give > you more than 200 > questions tomorrow. > "Victor Jia" <[EMAIL PROTECTED]> wrote in message > 8p4qke$pbp$[EMAIL PROTECTED]">news:8p4qke$pbp$[EMAIL PROTECTED]... > > I'm attending the BCRAN test in several days. I want more practice for it > > but there are few questions available for me. Can anyone send some for me? > > > > Thanks > > > > > > ___ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Lab Test in Canada? [7:59145]
He group, I live in Toronto, I was told that Canadian have to got to Halifax for CCIE LAB test, is it true? Or can I go to U.S. for the test? If I can, what is the nearest City in U.S.? Thanks a lot. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59145&t=59145 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
