enterprise release [7:8856]
what is meant by enterprise release i.e. first letter "j" in IOS image? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8856&t=8856 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
download of flash fails [7:8919]
I would like to install new flash ios image but I don't know what to do if it fails. Can I download ios from tftp without any flash installed? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8919&t=8919 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
e-mail encryption NT solution [7:9109]
If U have Exchage server for mail handling then U can do what U want. If this is your case tell me and I explane. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9150&t=9109 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: A post in alt.certification.cisco all should read [7:9286]
Our provider does not have this news group. Do you know any free web access to news or to this news group? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9296&t=9286 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CBAC and DOS attack [7:9748]
I have some trouble in understanding how to use firewall set(CBAC) to limit half open inbound sessions from Internet. First you have to identify traffic ip inspect name myname tcp then you have to put it on interface. cisco examples show only one situation when you need to allow sessions from your local LAN. So it is not clear should I apply inspecting to inbound traffic on serial int. or outbound for ethernet int. Did anyone deal whis it? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9748&t=9748 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IPSec question [7:10965]
I have some problem with IPSec. When I ping addresses between LANs they reply a few times and then die. To make it reply againg I have to clear route cache and after some pings it dies againg. Anyone had that problem? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10965&t=10965 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
call pickup by external modem [7:37532]
An external modem needs to be initialized to auto-answer in order to dial-up to work. So when I swith modem off and back on I have to manually do ats0=1. Is there any way to make it more automatic? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37532&t=37532 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
weird dail in problem [7:38092]
As fas as I see it I have problem with ppp autoselection when making connection I recieve Line reset by "Exec", the whole debug modem looks like Mar 13 18:01:19: TTY2: DSR came up Mar 13 18:01:19: tty2: Modem: IDLE->(unknown) Mar 13 18:01:19: TTY2: EXEC creation Mar 13 18:01:19: TTY2: set timer type 10, 30 seconds Mar 13 18:01:22: TTY2: Autoselect(2) sample FC Mar 13 18:01:22: TTY2: Autoselect(2) sample FC1C ... Mar 13 18:01:28: TTY2: Autoselect(2) sample 1C1CE0FC Mar 13 18:01:30: TTY2: Line reset by "Exec" Mar 13 18:01:30: TTY2: Modem: (unknown)->HANGUP Mar 13 18:01:30: TTY2: destroy timer type 0 Mar 13 18:01:30: TTY2: dropping DTR, hanging up line config is just very standard line 2 password 7 ... autoselect during-login autoselect ppp login local modem Dialin transport input all stopbits 1 speed 115200 flowcontrol hardware What can be the problem? connection by hyperterm works. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38092&t=38092 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IPSec question [7:10965]
Thank you for your reply. The problem was solved but I have another:) I have some static NAT translations and when I try to connect or ping host trough IPSec tunnel using its privet address NAT occurs and packet is no longer can go through tunnel. Cisco site has the article about this but there is only configuration with no explanation how loopback can help and what that config does. http://www.cisco.com/warp/public/707/static.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=11157&t=10965 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ipsec [7:12225]
You have to make sure that udp 500 and protocol ids 50 and 51 are not blocked. To start with I'd recommend to permit all traffic between IPSec hosts. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12254&t=12225 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IPSec problem [7:12463]
I have a very strange problem with IPSec, namely with ISAKMP. When it is time for next key exchange between piers (one in an hour) it goes well without any problem but all IPSec traffic is droped with messages like CRYPTO_ENGINE: packets dropped: State = 0 conn_id=2000, pak=81749C44 when I do "clear crypto sa" it starts working till next rekeying. Why could it happen? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12463&t=12463 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IPSEC in real life [7:12771]
Does anyone have in production cisco ipsec LAN-to-LAN tunnel? It's part of IOS seems to have so many bugs.. when you do it with IKE (ipsec-isakmp) cisco workaround is to reboot router. Manual keying (ipsec-manual) does not work at all with error IPSEC(manual_key_stuffing): Can't get valide engine id 0 My IOS version is 12.0.7T. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12771&t=12771 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
network utilization [7:29051]
I have configured cisco netflow, linux flow processing software and IIS web server to collect and show network usage by protocols http://net.nevcos.com/network I am very interested in similar projects. If anyone uses some software to monitor internet traffic, share your expirience with me, please. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29051&t=29051 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: network utilization [7:29051]
There was a problem with riderection so a working address is http://www.nevcos.com/net/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29179&t=29051 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]