Router hangs after system start
Hi, I would really appreciate if someone could help me with the following problem : After powering up a 2500 router it goes through the boot process and hangs after a system restart. I can enter the ROM Monitor mode, but the console freezes and takes no command. Has anyone got any clue what this could be ? Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-IS-L), Version 12.0(8), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Mon 29-Nov-99 13:51 by kpma Image text-base: 0x0303DE10, data-base: 0x1000 cisco 2500 (68030) processor (revision A) with 4096K/2048K bytes of memory. Processor board ID 01497575, with hardware revision Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Press RETURN to get started! 00:00:43: %LINK-3-UPDOWN: Interface BRI0, changed state to up 00:00:43: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up 00:00:43: %LINK-3-UPDOWN: Interface Serial0, changed state to down 00:00:43: %LINK-3-UPDOWN: Interface Serial1, changed state to down 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0, changed state to down 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down 00:00:46: %LINK-5-CHANGED: Interface Ethernet0, changed state to administratively down 00:00:47: %LINK-5-CHANGED: Interface BRI0, changed state to administratively down 00:00:48: %LINK-5-CHANGED: Interface Serial0, changed state to administratively down 00:00:48: %SYS-5-CONFIG_I: Configured from memory by console 00:00:48: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-IS-L), Version 12.0(8), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Mon 29-Nov-99 13:51 by kpma 00:00:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to down 00:00:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed state to down 00:00:49: %LINK-5-CHANGED: Interface Serial1, changed state to administratively down _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP study materials
Hi all, I am very badly looking for the Cisco Power point slide of the BCMSN exam. I have all the slides and lot of other studying materials including ebooks for BCRAN, BSCN, CIT and CCIE written exam. Waiting for your response, Xavier -- Sent through GMX FreeMail - http://www.gmx.net _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Support exam study material tip
Hi everybody, I would really appreciate if anybody could suggest good study material for the Support 2 exam. How would someone rate the new support book by Amir Ranjbar from Cisco press. Thanks in advance. Zahid _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router Stops working after awhile [7:36847]
Hi All, I would appreciate if anybody could shed some light into this problem. I have a router which just powers off after a while running. Sometimes it is not possible to power it on again. Is it something to do with the power supply or any other hardware in the router ? Regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36847&t=36847 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Power Supply [7:37773]
Hi All, I would appreciate if somebody would provide any information where I would be able to buy cheap power supply replacement for my Cisco 4000-M ? I have been searching in Ebay but haven't had any luck up to now. Many thanks. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37773&t=37773 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Comment on Boson's v3.83 CCIE Written Practice Test [7:12361]
Dear All, Would someone pls. comment on the quality and effectiveness of the Boson's v3.83 CCIE Written Practice test ? Any other relevant study and preparation tips would be much appreciated. Regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12361&t=12361 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Is Sybex CCIE study guide good? [7:13951]
Hi, I wouldn't rate it good. Probably you would want to use it to just to warm-up the topics but not further. The book doesn't go into any details nor does it cover the materials in the exam. All the other books mentioned are far better than the Sybex, specially Caslow's BRS for CCIE. Good luck. Zahid ""xie rootstock"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > ccie has many famous book, halabi, jeff doyle.Michael Wang wrote: > > > > Please let me know your opinion about Sybex CCIE study guide. > > > > Regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13953&t=13951 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CiscoWorks2000 IOS Configuration Backup [7:14858]
Hi All, Does anyone know were I can get documentation on how to do automated backup of files from routers and switches with Cisco Works 2000 ? Any help and pointers will be really appreciated. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14858&t=14858 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MCSE in 2 Weeks or CCNA/CCDA in 6 days [7:16046]
Pls. leave it. Its horrible to read messages from these kind of back door advertisers. Zahid ""Wright, Jeremy"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I can vouge for www.intenseschool.com I > attended their CCNA/CCDA camp and also their CCNP camp. I came out of it > with all of the certifications I wanted. Their program is cool because the > class,training material, hotel, and dinner were taken care of as the total > package (at least at the ones I attended). The CCNP camp will beat on you > mentally but I figure that is the reason why I was there. They don't teach > towards the test, but teach you to understand hands on, which will help you > pass the test. Now I have a new job that pays well because of these > certifications. Now I'm well on my way to getting my CCIE. No I'm not > advertising for them but I had a great experience and I owe everyone ar > www.intenseschool.com a lot. > > -Original Message- > From: Ron Rubens [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, August 14, 2001 10:13 AM > To: [EMAIL PROTECTED] > Subject: MCSE in 2 Weeks or CCNA/CCDA in 6 days > > > > ** > Get your MCSE in 2 Weeks or CCNA / CCDA in 6 days for > the lowest price ever. We are blowing out the last seats in > our August and September classes. > CALL NOW! > (800) 330-1446 www.intenseschool.com > ** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16069&t=16046 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCDP Requirement [7:16317]
Hi All, Can anybody pls. state the requirement to become a CCDP after CCNP ? My confusion is whether one needs to pass only CID or both and CID and CCDA. Any assistance will be greately apppreciated. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=16317&t=16317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CID VOICE [7:29307]
Hi, I have just taken the exam 5 weeks back and haven' seen any question on Voice. Zahid ""Michalis Palis"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello all > > I am studing for the CID exam and i was wondering if > voice is included int the exam since the new book has > a chapter on voice.. > > Any help will be appriciated > > __ > Do You Yahoo!? > Check out Yahoo! Shopping and Yahoo! Auctions for all of > your unique holiday gifts! Buy at http://shopping.yahoo.com > or bid at http://auctions.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29333&t=29307 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Thanks to GetCert.com. I'm now CCNP and CCDP. [7:31679]
and for all keep up with the back door advertisement. Zahid ""Kevin King"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello, > > I passed 640-025 the day before yesterday, and now I'm both CCNP and CCDP. > Thanks to GetCert.com. The practical exams I bought from www.GetCert.com is > very > useful. > > > Best regards, > > Kevin King > 2002-1-12 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31739&t=31679 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Running CCM on any Windows 2000 Server [7:32090]
Officially, Call Manager supports only MCS, Compaq and IBM platforms. Is it possible to tweak any Win2000 server, so that call manager setup thinks it is one of the mentioned platforms ? I would really appreciate any input. Best regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32090&t=32090 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Call manger Installation on a non approved box [7:32572]
Hi All, I am trying to install CM on a non approved box. I have heard that this can be done by tweaking the registry on a W2K box. Does any one know which registry key needs to be changed ? Or any other solution would also be deeply appreciated. Thanks for any input in this matter. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32572&t=32572 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCMSN Book Info
Hi Everybody, Can anybody recommend any good study material for the BCMSN exam. I have heard that the CCNP Switching Exam Prep from Sean Odom is very good. Can anybody confirm this ? I would really appreciate any feedback. Zahid -- Sent through GMX FreeMail - http://www.gmx.net ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP4 Reference
Hi everybody, I would appreciate if somebody could point to some good BGP documents. I have gone through the Cisco site and would like some additional information. Thanks in advance, Zahid ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MPLS Basic
Hi everyone, I was reading some basic Overview on MPLS and came accross some questions, I wonder if somebody could explain this to me: - assume that we have a router. - On it, we have a ethernet interface enabled for MPLS - Ethernet max transmission unit (MTU)is 1500 - A packet as big as the max MTU now needs to be sent through the ethernet - A label is 4 bytes long We cannot transmit more then the MTU over the ethernet ? does MPLS provide fragmentation ?? Thanks in advance, Regards Z -- Sent through Global Message Exchange - http://www.gmx.net ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCRAN
Hi everyone, I would appreciate any input on the BCRAN exam. How effective is the Boson exam for this test ? What materials can be recommended for studying ? Best Regards, Z. ** Zahid Hassan Global One Frankfurt Project Engineer VPN Service Engineering Phone: +49 69 92901 335 Fax: +49 69 92901 213 ** "It ain't worth a thing if you cannot get that ping" This email has been scanned for known viruses by the Global One messaging system. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCRAN Question
Hi everyone, I would like to request anyone who has the taken the BCRAN exam to give some input on the exam questions. a. How effective is the Boson test for the preparation of this exam ? b. What are the main chapters or topics to concentrate on ? c. can someone recommend any study guide or books which helped to pass the exam ? ** Zahid Hassan Global One Frankfurt Project Engineer VPN Service Engineering Phone: +49 69 92901 335 Fax: +49 69 92901 213 ** This email has been scanned for known viruses by the Global One messaging system. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN Concentrator Setup Question [7:65299]
Dear All, Is it possible to configure LAN-LAN and a Client-Concentrator VPN on a Cisco 3002 concentrator ? The idea is to allow clients (using software VPN client) to connect to the VPN concentrator and further connect to machines behind the remote VPN gateway. I would be really grateful for any thoughts. Thanks in advance. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65299&t=65299 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
LAN-LAN and Client-Concentrator VPN on 3000 Concentrator [7:65305]
Dear All, Is it possible to configure LAN-LAN and a Client-Concentrator VPN on a Cisco 3002 concentrator ? Cisco VPN Software ClientCisco 3002 VPN Concentrator-Checkpoint VPN Gateway The idea is to allow clients (using software VPN client) to connect to the VPN concentrator and further connect to machines behind the remote VPN gateway. I would be really grateful for any thoughts. Thanks in advance. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65305&t=65305 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Question about the Revised R&S CCIE Written Exam [7:66715]
Dear All, Could someone please confirm about the number of questions in the new R&S written exam after March 28 2003 as it is not mentioned on CCIE information page. Thanks in advance. Regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66715&t=66715 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: E1 PRI to E1 PRI via Dialup&All channels [7:70134]
laeuft es jetzt ? was macht der Aamiru ? ""Valeri Marinski"" wrote in message news:[EMAIL PROTECTED] > elle po > bin zu faul > > warum net so :) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70181&t=70134 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: E1 PRI to E1 PRI via Dialup&All channels [7:70134]
CottePo, CCO lesen. Es gibt mehr als genug beispiele. ISDN Configuration Examples http://www.cisco.com/en/US/partner/tech/tk801/tk379/tech_configuration_examples_list.html Configuring ISDN PRI and Other Signalling on E1 and T1 http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_configuration_guide_chapter0 9186a00800d9842.html ""Valeri Marinski"" wrote in message news:[EMAIL PROTECTED] Hi, i'd like to configure a PRI to PRI DIALUP connection between two routers using all the available channels but i get only 1 or 2 channels up what is the problem?!? Is it the right way to configure: pri-group timeslots 1-31 and than to use a "Dialer" interface to "dialer map ip " or should i for a channel group with: channel-group 0 timeslots 1-31 i tried but i couldn't bind the Serial1/0:0 interface that was created by this configuration to any dialer --- is it only for cable-to-cable connection ?? because i have to dial a number for this approach. thanks in advance for any comments or recommendations [demime removed a uuencoded section named s.gif which was 3 lines] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70156&t=70134 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Written Beta Announcement [7:41340]
Hi, Is it official yet ? I couldn't find any information from the Cisco site about the CCIE Beta announcement and therefore would appreciate if someone would shed more input in this. Zahid ""Don Nguyen"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... How much are the beta exams ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41428&t=41340 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Written Beta [7:41827]
Hi, I am not being able to find the exam (351-001) in the Prometric list of available exams. What was the tile/exam nr. that you used to register for the exam ? Many thanks. Zahid ""Bernard Omrani"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I took the CCIE written beta exam on Tuesday. 150 questions in 180 minutes. I can't think of any area in networking that was not covered in this exam, including VoIP, MPLS, Security, 6500 Switch (MSFC), IPX, (several FDDI questions, believe it or not), X.25, Frame Relay (CAR, TS, Queuing), ATM (AALx in detail), Ethernet, TCP/IP, (OSPF + IS-IS + EIGRP + BGP in detail), Multicasting (extensively) Detailed OSPF means knowing all LSA types inside out. You must be able to analyze OSPF database line-by-line and know where and what every parameter is. Detailed BGP means, not only knowing its fundamentals, but also some advanced commands that are even hardly used in the CCIE lab. Commands like "bgp deterministic med" (NDA: not exact same command). There were at least 5 questions on IS-IS. IMHO, the questions were tough, excellent, real-world, and very challenging. There were very few ambiguous questions. Out of 150 questions, about half of them came with diagrams or router configurations, or show outputs. Most of the pitfalls and tricks that one faces in the CCIE lab are covered in this exam. I dare to say that each question is a small scenario/lab by itself. Keeping the ISDN line quiet, controlling the PVCs in Frame Relay, redistribution between routing protocols (subnets in OSPF, no auto-sum and metrics in EIGRP, default-information originate BGP, passive interfaces, loops, recursive tunnels.) I have always advised my students to go for CID exam before attempting the CCIE written. CID would give the student almost 80% of the knowledge needed to pass the CCIE written. That rule does not apply to this new written exam. The closest exam that I can point out is: the CCIE lab. A word of advice to those who have already passed the written: Do not let it expire! A word of advice to those who are planning to take the exam: Take it before the new format is introduced! Bernard Omrani Author of Boson CCIE written Practice Tests #1 & #2 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42073&t=41827 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CSS Question [7:45713]
Dear All, Does a CSS supports secondary ip address on any of its Ethernet interfaces like a router ? Thanks in Advance. Regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45713&t=45713 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Show Interface Output [7:45716]
Dear All, I would really appreciate if someone would shed some light into my following question: I have configured rate-limit on an interface. When I do show interface fa0/0, do I see the number of bit/s under the 5 min input and output rate after the rate-limit has been applied or the actual bits/s the interface is receiving or transmitting ? Thanks in advance, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45716&t=45716 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
350-001 Expiry date [7:47744]
Dear All, Does anyone have any information when this exam is planned to expire ? Its been already a while since the beta exam came out, so would be interesting to know when the beta exam 351-001 is going live. Many thanks, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47744&t=47744 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CID 3.0 Exam [7:21200]
Hi All, I would appreciate any suggestions/tips on CID 3.0 exam. I will be taking the exam next week and am using mainly the CCO for preparation. Any input would be highly appreciated. Regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21200&t=21200 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Network Study Guides [7:22122]
The worst that you can get for money. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22149&t=22122 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Why can't I ping my own interface address? [7:25040]
Hi Folks, I am not being able to ping a local interface on a router. The encapsulation is default and is connected back to back on a serial interface to the next router. The output of show interface shows that the interface is up. I would appreciate if someone could shed some light into this problem. Thanking in advance. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25040&t=25040 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Study group:UK [7:56900]
Hi Nathan, Good to hear about your idea. I would also be interested to share experiences or maybe do lab practices together. Zahid ""Greg Nathan"" wrote in message news:200211051428.OAA16196@;groupstudy.com... Hi Anyone in London, UK want to form a study group where we can bounce around a few ideas and lab practise strategies? I have a fully kitted lab with 7 routers with voice, 2 switches, ISDN simulator etc. I am based in London, would prefer something a little less virtual if possible. Lemme know. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56980&t=56900 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CSS 11150 Booting Problem [7:58372]
Dear All, After a power outage, one of our CSS is failing to boot up properly. Every time its rebooted, it goes straight to the OFFDM although the Primary boot device has been selected to be Disk. I have formatted the Disk and loaded a new image, it booted with the new image once and its Loading to OFFDM every time its rebooted. I would be really grateful if someone could shed some light on this problem. Regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58372&t=58372 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Using BGP to load-share two feeds [7:61346]
Dear All, Is it possible to load-share outgoing traffic between two different ASN's? How? Would greatly appreciate any advice. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61346&t=61346 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: callmanager 3.1(3a) upgrade [7:61881]
Hi, I would really appreciate if you could point to the upgrade instruction in CCO. Regards, Zahid ""J M"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I did this recently. followed this guide. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62069&t=61881 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX Question [7:51095]
Hi All, I have got a PIX firewall with two interfaces, the outside interface has a public IP address and inside a private IP address. I will need to connect a server with a public IP address. I know that the PIX firewall can be configured not to NAT a specific IP address. Can I connect a server with a public IP address on the inside interface of the PIX ? If yes, what will be the default gateway, the inside or the outside interface of the PIX ? Thanks in advance. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51095&t=51095 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP Stability problem over DSL link [7:55507]
Dear All, I trying to configure BGP peering over a DSL link. The peering drops after few minutes, comes back once the DSL link is reseted. Other than that Internet connectivity over the DSL link seems to be working fine. Has anyone experienced any similar problem with BGP over DSL ? I would really appreciate any thoughts on this matter. Regards, Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55507&t=55507 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
