RE: backup interface [7:74836]

[kaiser anwar]

Hi,
  even when i shut down my serial interface nothing happens. Bri 0/0
  stays in standby mode. and sub interfaces in administratively down.
  one thing to keep in minds that i am using a simmultor. it is not 
  real isdn. show isdn status shows layer 1 deactivated.

Thanks
kaiser A


Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74867t=74836
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

backup interface [7:74836]

[kaiser anwar]

Hi,
   I am having issue with backup interface with isdn. I can ping
   my directly connected bri interface. but as soos as I hit my
   serial backup interface bri 0/0. Bri goes down. i do show isdn
   staus it says layer one deactived. this what it shows for sh ip int
   
Interface  IP-Address  OK? Method Status   
Protocol
Ethernet0/0unassigned  YES NVRAM  up   
up
Ethernet0/0.4  130.4.34.3  YES NVRAM  up   
up
Ethernet0/0.6  130.4.36.3  YES NVRAM  up   
up
BRI0/0 130.4.113.3 YES NVRAM  standby mode 
down
Serial0/0  130.4.100.3 YES NVRAM  up   
up
BRI0/0:1   unassigned  YES unset  administratively down
down
BRI0/0:2   unassigned  YES unset  administratively down
down
Virtual-Access1unassigned  YES TFTP   down 
down
Loopback0  130.4.3.3   YES manual up   
up

Thanks in advance for eveyone's help.

Sincerely,
Kaiser A 



Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74836t=74836
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

IBGP and syn [7:74542]

[kaiser anwar]

Hi,
   I am getting ready to take my lab on my own. I have a practice lab
   I wanted to know what is the alternate to using the no sync command
   for ibgp to propagate in igp. My routes are showing up but they are
   not the best routes.  Thanks


Sincerely,
Kiaser A


Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74542t=74542
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Re: IBGP and syn [7:74542]

[kaiser anwar]

Hi Nakul,
 What I have is Three routers  A - B - C
B is a route-reflector  A and C are clients b has neigbhor statements
for A and C. but A and C has only one neigbhor towards B which is
a route reflector. A is advertising a netwrok. which is showing up
best route in A but shows up on B but not as best route. My igp is
ospf also knows about the network.I am noy using no sync command. If I
do everything is fine. Thanks for your help.

Sincerely,
Kaiser Anwar



Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74552t=74542
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Re: Console port now working on 4000 [7:74489]

[kaiser anwar]

Hi,
   if you are using Hypertrm make sure its using the default


Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74554t=74489
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

Re: IBGP and syn [7:74542]

[kaiser anwar]

Thanks for your reply. I know exactly what you are saying about the lab.
when I do sh ip bgp for any network.

Origin incomplete, metric 0, localpref 100, valid, internal, not
synchronized

when it says not synchronized. thats when the whole issue starts
it does not matter how the network is injected into bgp whether it is
the net command or route-map or redistribution. If you are not using
no sync commnad under bgp.it will be advertised to Internal peer
but it will show up as not best route. and  when you issue an 
sh ip bgp for that route its says not synchronised. On the other hand
if you use the no sync command it works fine.


Thanks in advance.
Sincerely,
Kaiser A 


Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74557t=74542
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html