I just got a 4700M router through an auction. I think the guy is honest so I
doubt he sent me a bad router. Plus, he had a show version in the auction,
but I have reason to believe he just sells stuff he gets, so might not even
know how to get a show ver but copied it from who sold him the router.
I only have experience with 2500 routers. I connected to a 2500 router and
got output, then without changing anything, took out the console cable from
the 2500 and put it in the 4700M with a console cable sub25 to rj45 adapter
that comes standard with cisco console kits. Nothing appears. I've searched
cisco.com and believe I've found the hyperterminal settings are to be the
same as a 2500...9600, 2 stop bit, no hardware flow, so am left thinking the
adapter is bad, but brand new (I believe 3rd party console kits). The power
light comes on in front. There are 3 2port ethernet modules plugged in it.
The OK light only comes up on the far left one. But, I also put in a live
ethernet cable into each port and properly get a flashing link light, so
think those are fine.
Does anyone know what I'm doing wrong?
Thanks,Marcus
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20630&t=20630
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
