Re: VoIP problem
You will need to install the FXS voice cards into your router for as many as devices you need to connect. But then this will be the limitation on your router. Rajeev ALMEIDA Antonio Jose wrote: > Hello, > i'm planning one VoIP instalation and i don't want to use any PBX. I will > use one 2640 with HDV but i came to this question and i don't know the > answer: how can i connect to my network fax and modem's? What can i do? > > Antonio > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Book on Voice over Ip and Voice over Frame Relay
Hi every body, Can anyone provide me some info on which books are better for Voip and VoFr. Thanks and regards Rajeev Bharadwaj _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: URGENT: regarding VoIP
Hi Faisal, It seems that their is something wrong with your pix. You can rule it out by bypassing the pix or the access-lists. You can do some of the debugging on your voice routers acting as h.323 gateway. debug voip spi debug voip ccapi inout With these commands you will be able to know whether the call is getting bridged or not.I hope this will help you out. Regards Rajeev BHaradwaj Faisal Khan wrote: > Hello guys > > Greetings.. > I have my CCIE Exam on April 10 and 11. I need your urgent help. I am trying to >setup a Voice > over IP. Well everything works fine. When I put access list on one of the router to >act as a IOS > firewall, I can't make calls. Here is a sample access list > > access-list 140 permit tcp any any range 11000 11999 > access-list 150 permit ospf any any > access-list 150 permit icmp any any echo-reply > access-list 123 permit ip host 138.1.249.6 host 138.1.252.4 > access-list 150 permit udp any any range 16384 2000 > access-list 150 permit tcp any any eq 1720 > access-list 150 permit tcp any eq 1720 any > access-list 150 permit tcp any any range 11000 11999 > access-list 150 deny ip any any > > with this configuration, I can ring both phone from either location but I can't hear >anything. > Also does any one has info on IP OSFP Demand Circuit over ISDN. My ISDN line keep >flapping even > after putting the demand circuit. I can see that my routes in OSPF Database has DNA >mark beside > it but the line keep coming up. When do a show dialer, I see the d=224.0.0.5 Any >idea what could > cause this? > > I do have access list that permit only ISDN Network. > > Anyway help would be highly appreciate. > Thank you > faisal > > = > > __ > Do You Yahoo!? > Get email at your own domain with Yahoo! Mail. > http://personal.mail.yahoo.com/?.refer=text > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VOIP problem on two differrent router [7:760]
Dear Hieu, Yes it can be because of mismatch of cisco ios. Try using same version ob both the routers. It should work. I too faced the same problem. Regards Rajeev Hieu Truong wrote: > Hi all, > I currently use two Cisco router 2611 with IOS: 12.0(3)T3, VIC 2 ports E&M. > The VoIP works fine on these two one. Now I replace one of the Cisco 2611 by > Cisco 3662 version 12.1(2a)XH, and restore the configuration from C2611 to > C3662. All the setting for C3662 is the same as the previous C2611. However > the > VoIP can not work. After the dial, I got the strangely sound. > > Does anyone of you have experienced of this? Does it cause by different IOS? > > Thnks. > > -- > Sent through GMX FreeMail - http://www.gmx.net > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] [GroupStudy.com removed an attachment of type text/x-vcard which had a name of rajeevbharadwaj.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=6391&t=760 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]