I might be way of the mark here but shouldn't you be using a dlci number??
-Original Message-
From: Israr Akram [mailto:[EMAIL PROTECTED]]
Sent: 17 October 2000 14:11
To: [EMAIL PROTECTED]
Subject: 2 meg circuit over frame relay.
Hi ,the following is the config. script i will need. The last command line
"frame-relay map ip 10.1.2.3 (this is the next static hop)" is not being
acepted. Any suggestion well come.
interface Serial0
ip address (10.1.2.3) 255.255.255.255
encapsulation frame-relay IETF
arp arpa
arp timeout 5
bandwidth 1984000
frame-relay lmi-type ansi
frame-relay map ip 10.1.2.3 (this is the next static hop)
the 2meg circuit is a point to point circuit for any protocol.
I do have "enable ip classless"
_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
