Hi guys, I just wanted to send an update in terms of the problem that I had with a Cisco 1600 router in Seattle that went down (Frame-relay). Last Monday our users in Seattle could not log into our network and we were sent a page from HP Openview that the Seattle router stopped responding. I immediately call MCI to report the outage and they did a test and told me that everything on their side was OK and that the problem lies in my side (CPE). So I did some checks on my router and my configs was fine and later found out that my LMI readings were indicating that the router and cable that connects to the DCE was fine too (after much trouble). Then someone told me to do a sh frame-relay pvc and that was when I saw the PVC was DELETED. To make a long story short, I again called MCI and told them what I found and they sneakily put back the PVC. They said it was always up. BUT actually these goof balls in their haste to bring the PVC back up, put the wrong IP address to point to the international switch. Instead of 222 in the 3rd octet, they only put 22. Once I found out about it and told them to change , it our link to Seattle went back up. I would like to thank James C., Atom, Jim D., Tim L., Darren H. and last but not least Leigh Anne C. This is a great list which contains tonnes of brilliant individuals. Rgds, Manolito _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
