hey Folks My 2621 suddenly started dropping packets...with in a span of 30 minnutes i will have like 35 input error , 35 CRC error and like 15 frame error. I know the problem might be the ethernet port on the router ..or a kink on my cable ? or the switch it is attached to. I really want to compare note with anyone who has experience this. the interface is Fastethernet 0/0 , the other fastethernet 0/1 is not like that. no error what so ever...i am wondering what went wrong all of a sudden. Kindly help please Cisco Certification Digest wrote: Cisco Certification Digest Saturday, November 2 2002 Volume 02 : Number 2316
In this issue of the Cisco Certification Mailing List Digest: petition.... [7:56688] HSRP VLAN Load Balancing [7:56689] 802.1Q trunking on 2500?? [7:56690] RE: HSRP VLAN Load Balancing [7:56689] RE: 802.1Q trunking on 2500?? [7:56690] RE: 802.1Q trunking on 2500?? [7:56690] RE: Problems w/Hyperterminal?? [7:56619] Re: 802.1Q trunking on 2500?? [7:56690] RE: Problems w/Hyperterminal?? [7:56619] RE: Forrest Gump-like arp(?) question [7:56680] RE: Problems w/Hyperterminal?? [7:56619] RE: Problems w/Hyperterminal?? [7:56619] Re: Expensive [7:56598] RE: HSRP VLAN Load Balancing [7:56689] ICS7750 with only One SPE Card [7:56705] RE: 802.1Q trunking on 2500?? [7:56690] Re: Problems w/Hyperterminal?? [7:56619] RE: 802.1Q trunking on 2500?? [7:56690] OT: AVVID Discussion Group [7:56670] RE: AVVID Discussion Group [7:56673] RE: Study Material for New Written Format [7:56692] Re: books for ccie written [7:56604] Re: OT: AVVID Discussion Group [7:56703] RE: Forrest Gump-like arp(?) question [7:56680] RE: Forrest Gump-like arp(?) question [7:56680] Re: Forrest Gump-like arp(?) question [7:56680] RE: Problems w/Hyperterminal?? [7:56619] Re: Forrest Gump-like arp(?) question [7:56680] RE: Forrest Gump-like arp(?) question [7:56680] RE: Cisco Security Specialist [7:56675] RE: Forrest Gump-like arp(?) question [7:56680] Re: Forrest Gump-like arp(?) question [7:56680] cable network and MIBs [7:56719] Re: Problems w/Hyperterminal?? [7:56619] switch and router security [7:56721] RE: Problems w/Hyperterminal?? [7:56619] RE: Problems w/Hyperterminal?? [7:56619] RE: Problems w/Hyperterminal?? [7:56619] RE: books for ccie written [7:56604] Re: Problems w/Hyperterminal?? [7:56619] IS-IS on BSCI 640-901 [7:56727] Re: switch and router security [7:56721] Re: 802.1Q trunking on 2500?? [7:56690] ---------------------------------------------------------------------- Date: Fri, 1 Nov 2002 15:31:43 GMT From: "Paul Beckman" Subject: petition.... [7:56688] - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a favor to ask of everyone.... We are trying to put a case together to present to Cisco about the caller name ID. We were promised this feature when we bought our system (2 years ago) and still do not have this feature. We understand that Cisco is looking at the Display IE filed and our Telco and any Telco in our area are sending it in the Facility IE field. What we want to do is get a list of people or companies that would like to have this feature as well, and any info about lost sales because this feature is not available. If you would like to send me your name and email address I will put it on a list that will be sent to Cisco. Thank you, Paul Beckman MCSE MCT CCNA CCA Delta Health Group CIS Department (850) 470-0155 [EMAIL PROTECTED] - -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use iQA/AwUBPcKefxWcSOytpgTKEQKt1ACfToJIVupDeV2bu6JIzg4ndupmVVUAnArT MFtfT2joffrDxc3snuFR8a/h =CoHL - -----END PGP SIGNATURE----- Date: Fri, 1 Nov 2002 15:42:19 GMT From: "Dale Kling" Subject: HSRP VLAN Load Balancing [7:56689] Here's a scenario I've been faced with recently and have a solution, but wanted to get any other ideas somebody might have. The question calls for this: - - Configure cat1 and cat2 for layer 3 redundancy with HSRP for Vlan 5 - - Configure HSRP such that when both cat switches are available, traffic is load balanced across both cat switches and when one is unavailable, the other cat should take over all traffic from Vlan 5. Here's my configuration idea: Cat1: Interface Vlan 5 ip address 150.50.5.5 255.255.255.0 standby 1 ip 150.50.5.100 standby 1 priority 150 preempt standby 2 ip 150.50.5.200 standby 2 priority 155 preempt Cat2: Interface Vlan 5 ip addres 150.50.5.10 255.255.255.0 standby 1 ip 150.50.5.100 standby 1 priority 155 preempt standby 2 ip 150.50.5.200 standby 2 priority 150 preempt Cat1 will assume the role of the virtual IP 150.50.5.100 and Cat2 will assume the role of virtual IP 150.50.5.200. One would then configure the default gateways on the hosts. Half the hosts have 150.50.5.100 listed first as the D.G. and the other half would have 150.50.5.200 listed first as the D.G. Is there another way to do this? Thanks, Dale Date: Fri, 1 Nov 2002 16:15:55 GMT From: "cer" Subject: 802.1Q trunking on 2500?? [7:56690] Hi, all, Can the 2500 series support 802.1Q? If so, what IOS version and feature set would be needed? I want to create some logical subinterfaces on the 2500 that correpond to VLANs, as a way of segmenting traffic. TIA, Charles Date: Fri, 1 Nov 2002 16:55:48 GMT From: "John McCartney" Subject: RE: HSRP VLAN Load Balancing [7:56689] That is the way I used to do it at the ISP I used to work at...before the layoffs...We had two 6509's linked together in a full-mesh and used a cfg similar to what you have. If there is another way. I'd be interested in finding out about it. HTH's Date: Fri, 1 Nov 2002 17:05:41 GMT From: "Connie Nie" Subject: RE: 802.1Q trunking on 2500?? [7:56690] I don't think you can do that on a 10M interface. Has to be a fast ethernet interface. Connie - -----Original Message----- From: cer [mailto:ciscoriley@;hotmail.com] Sent: Friday, November 01, 2002 11:16 AM To: [EMAIL PROTECTED] Subject: 802.1Q trunking on 2500?? [7:56690] Hi, all, Can the 2500 series support 802.1Q? If so, what IOS version and feature set would be needed? I want to create some logical subinterfaces on the 2500 that correpond to VLANs, as a way of segmenting traffic. TIA, Charles Date: Fri, 1 Nov 2002 17:14:28 GMT From: "Walker, James - Is" Subject: RE: 802.1Q trunking on 2500?? [7:56690] Hi, I made a mistake making that statement. With the new IOS codes, 12.x, you can create subinterfaces. :-O Jim - -----Original Message----- From: Connie Nie [mailto:CNie@;EPLUS.com] Sent: Friday, November 01, 2002 12:06 PM To: [EMAIL PROTECTED] Subject: RE: 802.1Q trunking on 2500?? [7:56690] I don't think you can do that on a 10M interface. Has to be a fast ethernet interface. Connie - -----Original Message----- From: cer [mailto:ciscoriley@;hotmail.com] Sent: Friday, November 01, 2002 11:16 AM To: [EMAIL PROTECTED] Subject: 802.1Q trunking on 2500?? [7:56690] Hi, all, Can the 2500 series support 802.1Q? If so, what IOS version and feature set would be needed? I want to create some logical subinterfaces on the 2500 that correpond to VLANs, as a way of segmenting traffic. TIA, Charles Date: Fri, 1 Nov 2002 17:23:56 GMT From: "Greg Macaulay" Subject: RE: Problems w/Hyperterminal?? [7:56619] It's not nice to "flame" an "active" member of the Bar who is still in "good standing"!!!! Alzheimer's (Cisco type) may indeed be overtaking me here, but my "legal" brain cells are still quite sharp. So "flame" me at your own risk!!!!! Perhaps I can obtain "enuf" from a lawsuit to purchase an ISDN simulator!!!! Don't anybody take the above para in the wrong vein! I was simply having a bad day (and then I had to take my grandchildren "trick or treating" for hours -- while I searched through my Alzheimer-ridden brain cells to identify a solution to my problem. Now back to my problem. Greg Macaulay Oldest Human Being preparing for the CCIE Lab Lifetime AARP member Retired Attorney/Law Professor > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com]On Behalf Of > Tom Lisa > Sent: Thursday, October 31, 2002 8:10 PM > To: [EMAIL PROTECTED] > Subject: Re: Problems w/Hyperterminal?? [7:56619] > > > Priscilla, > > The real reason not to flame him is because he may come out of retirement > and sue all of us! :) > > Prof. Tom Lisa, CCAI > Community College of Southern Nevada > Cisco ATC/Regional Networking Academy > "Cunctando restituit rem" > > Priscilla Oppenheimer wrote: > > I wouldn't flame the oldest CCDP on the planet ;-), but, what do you > mean > you can't ping from HyperTerminal? HyperTerminal just gets you serial > access > to the console port. > > Priscilla > > Greg Macaulay wrote: > > > > Hi all -- > > > > I'm suffering thru a terrible newbies type problem and cannot > > seem to > > identify the error of my ways. I know it's something very > > basic -- and it > > brings back memories of high school geometry homework where I > > stared at > > objects for hours on end trying to understand!!! > > > > The thrust of my pitiful situation is: I cannot "ping" from > > hyperterminal -- > > altho' I can readily "ping" from a DOS prompt on the same PC. > > > > I have the parameters set properly 8-N-1-None -- and I have > > tried with the > > TFTP server setup on the same PC and on another in my home > > network (I have > > 10 pcs in my home network -- most old -- but they still > > work!). Neither > > works. > > > > Any suggestions. And please don't waste time flaming me -- I > > know I should > > be able to figure this out -- but even after researching the > > archives and > > CCO, I am no closer to a solution than I am to passing the LAB > > on the first > > try!!!!! > > > > So any and all helpful suggestions would be welcome. > > > > Thanks to all -- in advance!! > > Greg Macaulay > > Oldest Human Being preparing for the CCIE Lab > > Lifetime AARP member > > Retired Attorney/Law Professor > [EMAIL PROTECTED] Date: Fri, 1 Nov 2002 17:24:25 GMT From: "cer" Subject: Re: 802.1Q trunking on 2500?? [7:56690] James, Is that doable on a 2500 series router? Basically, I want to configure something like this: Switch has VLAN 10 VLAN 20 VLAN 30 I want to set up 802.1Q trunking between the switch and 2500 such that: VLAN10 goes to Ethernet 0.10 VLAN20 goes to Ethernet 0.20 VLAN30 goes to Ethernet 0.30 Just wanted to clarify what it is that I would like to do. I just wasn't sure if the 2500 router support 802.1Q or if this can even be done. TIA, Charles ""Walker, James - Is"" wrote in message news:200211011714.RAA19606@;groupstudy.com... > Hi, > > I made a mistake making that statement. With the new IOS codes, 12.x, you can > create subinterfaces. :-O > > Jim > > > -----Original Message----- > From: Connie Nie [mailto:CNie@;EPLUS.com] > Sent: Friday, November 01, 2002 12:06 PM > To: [EMAIL PROTECTED] > Subject: RE: 802.1Q trunking on 2500?? [7:56690] > > > I don't think you can do that on a 10M interface. Has to be a fast ethernet > interface. > > Connie > > -----Original Message----- > From: cer [mailto:ciscoriley@;hotmail.com] > Sent: Friday, November 01, 2002 11:16 AM > To: [EMAIL PROTECTED] > Subject: 802.1Q trunking on 2500?? [7:56690] > > > Hi, all, > > Can the 2500 series support 802.1Q? If so, what IOS version and feature set > would be needed? > > I want to create some logical subinterfaces on the 2500 that correpond to > VLANs, as a way of segmenting traffic. > > TIA, > > Charles Date: Fri, 1 Nov 2002 17:40:20 GMT From: "Greg Macaulay" Subject: RE: Problems w/Hyperterminal?? [7:56619] > I had a new theory about what would cause his symptoms, or at least what I > think his symptoms are: > > PC can ping router. > PC can Telnet to router?? (we're not sure if he's Telnetting or not) > Router can't ping PC. > Router can't TFTP a file to the PC. > > Possible explanation: the PC is running a firewall! From my > knowledge of the default behavior of many personal firewalls, this seems rather likely. > > There could be an access list on the router too that could cause this. Sorry about not replying last nite -- I ran out of time and had to take my grandchildren "trick or treatin'" -- but I appreciate all the input. First -- I am not running an access list. I just got this router (2511) and wanted to configure it, including upgrading the IOS (existing IOS 10.2(4)). Thus, I first wanted to copy the flash to the tftp server. Apparently, this is where I have gone wrong!! With my advanced age as an "excuse" -- from hyperterminal I merely typed in "copy flash tftp" and was unsucessful: TermServer>enable Password: TermServer#copy flash tftp System flash directory: File Length Name/status 1 4404136 ij10240 [4404200 bytes used, 12373016 available, 16777216 total] Address or name of remote host [GREG]? Source file name? ij10240 Destination file name [ij10240]? Verifying checksum for 'ij10240' (file # 1)... OK Copy 'ij10240' from Flash to server as 'ij10240'? [yes/no]y ..... Copy aborted - TFTP timeout TermServer# This procedure has worked flawlessly for the past couple of years. The sole difference in my network now is that I have installed a Linksys cable modem and hub (100). That being said -- I wonder if Priscilla's last theory might be the culprit. My cable-modem router runs NAT. SO I'll do some exploring and investigating and get back to all of you later today. ' Thanks again for the assistance. I know my question (at least at my level of training) may seem dumb, but as a professor I used to tell my students, "The only dumb question is the one that is NOT asked!!!" So be patient and forgive me for my apparent lack of ability to resolve this issue myself! Greg Macaulay Oldest Human Being preparing for the CCIE Lab Lifetime AARP member Retired Attorney/Law Professor Date: Fri, 1 Nov 2002 18:07:30 GMT From: "Priscilla Oppenheimer" Subject: RE: Forrest Gump-like arp(?) question [7:56680] Can't you just do a "clear arp" on the 6509? That's a commonly-used IOS command. I would assume it works on the 6509. Or should I say ass-u-me it works. :-) Priscilla Mark Smith wrote: > > I need to replace a router in a cabinet at the facility where > my hosted servers and equipment is. My equipment is "talking" > to the hosting facility's network via a port on a 6509 switch. > I replaced my router and then nothing from my network could > connect to the outside world. I waited about 2 minutes (during > which time my entire site's down and my bosses get VERY > nervous) and I never was able to connect from inside and my > tester on the outside was never able to get in to me. I finally > put router #1 back in and all was well again. I've scoured the > configuration and #2's is identical with #1 so I don't believe > that is the problem. I'm ass-u-me-ing that the reason for this > is the 6509 port's ARP cache is looking for the MAC address of > router #1 and it ain't there anymore. Would this ass-u-me-ption > be correct or is it possibly something else I'm not > thinking/aware of? If it is an ARP issue, is there a way that I > can remotely force the 6509 port to reset/clear/refresh it's > ARP cache? I'm at a Sprint facility and I'd sooner get a live > body (that's not a first level phone answerer anyway) to talk > to me when I'm calling Mars than trying to get one at Sprint. > > Any ideas/thoughts/chastisements on missing the obvious here? > As much as I'd like to work with Cisco gear full time, it's > only a very small part of my current job and, consequently, due > to my lack of familiarity with what you guys do all day every > day, it's very likely that I'm missing something that all in > the world except me know about. > Thanks for any help or ideas. > > Mark Date: Fri, 1 Nov 2002 18:26:10 GMT From: "Priscilla Oppenheimer" Subject: RE: Problems w/Hyperterminal?? [7:56619] Greg Macaulay wrote: > > > I had a new theory about what would cause his symptoms, or at > least what I > > think his symptoms are: > > > > PC can ping router. > > PC can Telnet to router?? (we're not sure if he's Telnetting > or not) > > Router can't ping PC. > > Router can't TFTP a file to the PC. > > > > Possible explanation: the PC is running a firewall! From my > > knowledge of the default behavior of many personal firewalls, > this seems > rather likely. > > > > There could be an access list on the router too that could > cause this. > > > Sorry about not replying last nite -- I ran out of time and had > to take my > grandchildren "trick or treatin'" -- but I appreciate all the > input. > > First -- I am not running an access list. I just got this > router (2511) and > wanted to configure it, including upgrading the IOS (existing > IOS 10.2(4)). > Thus, I first wanted to copy the flash to the tftp server. > Apparently, this > is where I have gone wrong!! What IP addresse are you using? What is acting as the TFTP server? Are you sure it's running?? > > With my advanced age as an "excuse" -- from hyperterminal I > merely typed in > "copy flash tftp" and was unsucessful: > > TermServer>enable Well, the fact that you can type and the router is responsive proves that HyperTerminal is working OK. > Password: > TermServer#copy flash tftp > System flash directory: > File Length Name/status === message truncated === --------------------------------- Do you Yahoo!? HotJobs - Search new jobs daily now Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56735&t=56735 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]