Does anybody have an idea on how to configure a digi portserver (terminal) so i can connect through it to my cisco routers. I have set up an ip address of 10.0.0.1 for the terminal server and can log in no problem whatsoever,however, Whilst i am in the root mode i cannot reverse telnet to any of the ports as it comes up with the following:-
> telnet 10.0.0.1 2001 err#43 : telnet : access to this port denied. I am using hyperterminal as the emulation program and i can reverse telnet into the routers if i change the setup of hyperterminal by keeping the ip address as 10.0.0.1 though changing the port to 2001. Im sure there must be a way for me to log into the digi portserver and then navigate to any of the routers without having to exit the current connection and then re establish a new one to the new port. Apologies if this off topic and a bit confusing though im getting confused with it. If anyone has a sample config of a digi portserver, that would be most helpful as well....... Cheers Matt Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58453&t=58453 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
