Re: Duplicating Address on HSRP [7:56431]
Since a reload solved the problem it's hard to troubleshoot now and this is probably not the problem but last week I got a call from a customer whose core was down and they were seeing the same message on their 6500. What I did was connected to the MSFC that was configured with the duplicate address and changed it to an address in the same subnet that we knew was not in use. I then tried connecting to the duplicate address that was in the error log and sure enough another router had the same address. Dave Casey Fahey wrote: Hard to say without looking at your configs, but I would guess that you might have some inconsistant HSRP configs on VLAN 25. I suggest that you 'sh vlan 25' on your switches to make sure that you are aware of all VLAN 25 ports and then post the interface configs (especially HSRP configs) for all router interfaces on VLAN 25. It seems to me that your problem is most likely network layer, so you will likely find the problem on a router or MSM/MFSC. HTH, Casey Han Chuan Alex Ang wrote in message news:200210290422.EAA04769;groupstudy.com... hi, I have been having this problems recently, Wonder if anyone could help me out on this one I am running a Collapsed Core Model with two Catalyst 6000 running on HSRP for redundancy , all link connect to the Access switches are Catalyst 3500 series with redundancy link and PVST Plus implemented (The two Catalyst 6000 are defined as primary and secondary Root for all vlan except for VLAN 25. However, one direct link from the Core Bridge's port is connected without redundancy link)VLAN25 to 7206 Router interface(Root Bridge). Recently , the Router interface seem to be faulty and the whole network was town (affecting other Vlan) my understanding is that it should not affect other VLAN. Error message as follow was given Oct 12 13:15:41: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 13 16:25:41: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 15 22:31:02: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 15 22:41:01: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 A reload on the Gigabit module was needed in order to solve the problems. I am not quite sure what could have cause this problems , anyone care to enlighten me , thank My guess is that the faulty interface cause a recalculation for STP as the Root is gone and that cause the link to be lost between the two catalyst and thus resulting in a loop -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 You don't make the poor richer by making the rich poorer. --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=56457t=56431 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Duplicating Address on HSRP [7:56431]
hi, I have been having this problems recently, Wonder if anyone could help me out on this one I am running a Collapsed Core Model with two Catalyst 6000 running on HSRP for redundancy , all link connect to the Access switches are Catalyst 3500 series with redundancy link and PVST Plus implemented (The two Catalyst 6000 are defined as primary and secondary Root for all vlan except for VLAN 25. However, one direct link from the Core Bridge's port is connected without redundancy link)VLAN25 to 7206 Router interface(Root Bridge). Recently , the Router interface seem to be faulty and the whole network was town (affecting other Vlan) my understanding is that it should not affect other VLAN. Error message as follow was given Oct 12 13:15:41: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 13 16:25:41: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 15 22:31:02: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 15 22:41:01: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 A reload on the Gigabit module was needed in order to solve the problems. I am not quite sure what could have cause this problems , anyone care to enlighten me , thank My guess is that the faulty interface cause a recalculation for STP as the Root is gone and that cause the link to be lost between the two catalyst and thus resulting in a loop Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=56431t=56431 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Duplicating Address on HSRP [7:56431]
Hard to say without looking at your configs, but I would guess that you might have some inconsistant HSRP configs on VLAN 25. I suggest that you 'sh vlan 25' on your switches to make sure that you are aware of all VLAN 25 ports and then post the interface configs (especially HSRP configs) for all router interfaces on VLAN 25. It seems to me that your problem is most likely network layer, so you will likely find the problem on a router or MSM/MFSC. HTH, Casey Han Chuan Alex Ang wrote in message news:200210290422.EAA04769;groupstudy.com... hi, I have been having this problems recently, Wonder if anyone could help me out on this one I am running a Collapsed Core Model with two Catalyst 6000 running on HSRP for redundancy , all link connect to the Access switches are Catalyst 3500 series with redundancy link and PVST Plus implemented (The two Catalyst 6000 are defined as primary and secondary Root for all vlan except for VLAN 25. However, one direct link from the Core Bridge's port is connected without redundancy link)VLAN25 to 7206 Router interface(Root Bridge). Recently , the Router interface seem to be faulty and the whole network was town (affecting other Vlan) my understanding is that it should not affect other VLAN. Error message as follow was given Oct 12 13:15:41: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 13 16:25:41: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 15 22:31:02: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 Oct 15 22:41:01: %STANDBY-3-DUPADDR: Duplicate address 10.25.0.1 on Vlan25, sourced by .0c07.ac19 A reload on the Gigabit module was needed in order to solve the problems. I am not quite sure what could have cause this problems , anyone care to enlighten me , thank My guess is that the faulty interface cause a recalculation for STP as the Root is gone and that cause the link to be lost between the two catalyst and thus resulting in a loop Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=56438t=56431 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
