I have this scenerios: R4's loopback address is 170.100.40.4/29 running
EIGRP.R4's Serial 1/0 interface's address is 170.100.124.4/24 running OSPF.
Mutual redistribution is also configured on R4. R2 S0/0 170.100.124.2/24is
connected to R4 through FR with OSPF Routing Protocol. Due to
redistribtution on R4,I am able to see 170.100.40.4/29 route on R2.
Everthing is fine at that point. (Multipoint Frame Relay) R2 S1/0
170.100.23.2/24 is connected to R3 S0/0 170.100.23/24 (Point-to-Point FR)
running IGRP. Mutual Redistribution is configured on R2 as well. Obviously
I am not able to see the route 170.100.40.4/29 from R4into R3 routing table
due to the classful nature of IGRP protocol. The only work around I could
have done in this scenrio to summarize route 170.100.40.4/29 on R4. Here is
what I did. R4's S1/0 ip summary-address eigrp 1 170.100.40.0
255.255.255.0. I expected to see the route 170.100.40.0/24 onR2's routing
table so then it would redistribute that route to IG
RP and then R3 would be able to seethis route, but didn't work. Somehow
R2's is still getting the 170.100.40.4/29 route. Am I doing something wrong?
Regards, Teza
___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66391&t=66391
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]