The FDDI Frame Control byte has a bit that says whether the FDDI frame uses
16-bit MAC addresses (bit is 0) or 48-bit MAC addresses (bit is 1).
The IEEE 802 committee used to allow 16-bit instead of 48-bit addresses.
When ANSI developed FDDI they were just following the 802 committee.
Theoretically 802.3 and 802.5 could use 16-bit addresses too, but, as you
probably know, 16-bit addresses didn't catch on. MAC addresses are 48 bits.
Priscilla
At 05:07 PM 11/23/00, Phil Barker wrote:
>Greetings,
> Reading through CIT course notes Appendix A.
>It states that the Frame Control field indicates the
>size of the address fields i.e variable, this is
>followed by the size of the address fields is 6 bytes.
>
>
>Does anyone know the history behind this ?
>
>I´m guessing that it was being positioned to
>accomodate variable and differing other LAN
>technologies address sizes, such that it could be used
>as a versatile backbone !!!
>
>Any comments ?
>
>Regards,
>
>Phil.
>
>
>
>Do You Yahoo!?
>Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
>or your free @yahoo.ie address at http://mail.yahoo.ie
>
>_
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Priscilla Oppenheimer
http://www.priscilla.com
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
