Help for study purpose
I am new to cisco and just started reading for the CCNA Exam. I am having one 2501 CISCO Router and I will like to make use of the aux port connected to a modem to dial to the internet. I tried to configure the aux line usin "line aux 0" but was unable to configure PPP with this interface. My IOS Ver is 11.0. Any hint on how to o this shall be higly appreciated. Francis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help for study purpose
I am new to cisco and just started reading for the CCNA Exam. I am having one 2501 CISCO Router and I will like to make use of the aux port connected to a modem to dial to the internet. I tried to configure the aux line usin "line aux 0" but was unable to configure PPP with this interface. My IOS Ver is 11.0. Any hint on how to do this shall be higly appreciated. Francis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help for study purpose
http://www.cisco.com/warp/public/123/4.html http://www.cisco.com/kobayashi/technotes/tech_features.shtml This should be the first place that you look. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12supdoc/dsq cg3/qcpppara.htm Might be useful. Consider buying the BCRAN, Building Cisco Remote Access Networks, book from Cisco Press. -Original Message- From: Francis Kola Eludini [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 10, 2000 10:36 AM To: [EMAIL PROTECTED] Subject: Help for study purpose I am new to cisco and just started reading for the CCNA Exam. I am having one 2501 CISCO Router and I will like to make use of the aux port connected to a modem to dial to the internet. I tried to configure the aux line usin "line aux 0" but was unable to configure PPP with this interface. My IOS Ver is 11.0. Any hint on how to o this shall be higly appreciated. Francis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help for study purpose
Dr, My first suggestion would be to upgrade the code on your router so that you're running a newer code than 11.0. You'll find that ppp debugs are a lot easier to read in 11.3 and higher, and that you have a lot more functionality available to you. The configuration of a modem on the AUX port isn't too difficult, and you shouldn't have too much of a problem if you have the cabling right, a good modem (my preference is USR Sportster), and the correct configuration. Configure the modem with an appropriate initialization string (get this from the modem manufacturer) using the everse telnet procedure s outlined here; http://www.cisco.com/warp/public/76/9.html The line aux 0 is the physical port, and will not take any ppp commands. The logical configuration goes on the logical interface (async interface) which you will ned to create. To create an async interface that corresponds to the AUX port, type in 'show line' at the exec prompt. The number that precedes the word AUX in this output is what you use for the async interface. So for example, if that number is "1", your configuration would look somehing like this: ! hostname Router enable pasword cisco ! chat-script test "" "atdt\T" TIMEOUT 60 CONNECT \c ! Interface async 1 ip address negotiated encapsulation ppp dialer in-band dialer-group 1 dialer idle-timeout 300 dialer string 5123245 async default routing async mode interactive ppp authenication chap pap callin ppp chap hostname MyUsername ppp chap password MyPassword ppp pap sent-username MyUsername password Mypassword ! dialer-list 1 protocol ip permit ! line aux 0 modem inout flowcontrol harware transport input all speed 115200 script dialer test ! You can find lots of information on this and other configs on CCO if you know your way around it.A good place to start is the Dial Access Configuration Cookbook http://www.cisco.com/warp/public/793/access_dial/index.html Good luck on your CCNA!! Michael A From: "Dr. Francis Kola Eludini" [EMAIL PROTECTED] Reply-To: "Dr. Francis Kola Eludini" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Help for study purpose Date: Tue, 10 Oct 2000 18:20:54 +0200 I am new to cisco and just started reading for the CCNA Exam. I am having one 2501 CISCO Router and I will like to make use of the aux port connected to a modem to dial to the internet. I tried to configure the aux line usin "line aux 0" but was unable to configure PPP with this interface. My IOS Ver is 11.0. Any hint on how to do this shall be higly appreciated. Francis _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help for study purpose
On Thu, 9 Nov 2000, michael owuor wrote: Dr, My first suggestion would be to upgrade the code on your router so that you're running a newer code than 11.0. You'll find that ppp debugs are a lot easier to read in 11.3 and higher, and that you have a lot more functionality available to you. And if you're limited to 8MB of flash and want to do Enterprise, look at 11.2(24)P which fits the bill and is an Early Deployment (feature rich) release with relativley few caveats. Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
