Re: How to Config DSU/CSU....
The protocol down on the 1005 is because of the no keepalive on the 2501. Rodgers Moore "Minh Vu" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate 56k > link across those two, but I couldn't find the command or how to config > this, before I was used cross-over between those two. > The cross-over between two DSU/CSU was working (its display linked @56k) > > Here is my layout: > > 1005<--->DSU/CSUDSU/CSU<>2501 > > DSU/CSU :Motorola 3512 > IOS: 11.3.11aT1 > > here is "int s0" of 2501 config: > interface Serial1 > ip address 50.0.0.1 255.0.0.0 > no keepalive > ! note I using HDLC encap. > > !note with this 2501 config, I got > Serial1 is up, line protocol is up > > > here is 1005 config > interface Serial0 > ip address 50.0.0.2 255.0.0.0 > no ip mroute-cache > bandwidth 56000 > fair-queue 64 256 0 > ! also using HDLC encap. > > !note with this 1005 config, I got > Serial0 is up, line protocol is down > > > Anyone have sample config on EXTERNAL DSU/CSU. I looked thru cisco site, > they just have sample for INTERNAL only, which I don't have those command > (ie: service-module , and T1-controller). > > > Thanks > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: How to Config DSU/CSU....
Title: RE: How to Config DSU/CSU An external CSU/DSU isn't configured within the router. It's usually configured either through the front panel display or via DIP switches. You'll want to verify at least three things on your CSU: line speed (number of channels), framing (ESF/D4), and line coding (B8ZS/AMI). You may also need to configure clocking, bit robbing, etc. It will help you immensely to have a manual for your CSU available. You may want to check the manufacturer's website, if they have one. Good luck! - Don -Original Message- From: Minh Vu [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 23, 2000 10:12 PM To: '[EMAIL PROTECTED]' Subject: How to Config DSU/CSU Hi, How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate 56k link across those two, but I couldn't find the command or how to config this, before I was used cross-over between those two. The cross-over between two DSU/CSU was working (its display linked @56k) Here is my layout: 1005<--->DSU/CSUDSU/CSU<>2501 DSU/CSU :Motorola 3512 IOS: 11.3.11aT1 here is "int s0" of 2501 config: interface Serial1 ip address 50.0.0.1 255.0.0.0 no keepalive ! note I using HDLC encap. !note with this 2501 config, I got Serial1 is up, line protocol is up here is 1005 config interface Serial0 ip address 50.0.0.2 255.0.0.0 no ip mroute-cache bandwidth 56000 fair-queue 64 256 0 ! also using HDLC encap. !note with this 1005 config, I got Serial0 is up, line protocol is down Anyone have sample config on EXTERNAL DSU/CSU. I looked thru cisco site, they just have sample for INTERNAL only, which I don't have those command (ie: service-module , and T1-controller). Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How to Config DSU/CSU....
Hi, How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate 56k link across those two, but I couldn't find the command or how to config this, before I was used cross-over between those two. The cross-over between two DSU/CSU was working (its display linked @56k) Here is my layout: 1005<--->DSU/CSUDSU/CSU<>2501 DSU/CSU :Motorola 3512 IOS: 11.3.11aT1 here is "int s0" of 2501 config: interface Serial1 ip address 50.0.0.1 255.0.0.0 no keepalive ! note I using HDLC encap. !note with this 2501 config, I got Serial1 is up, line protocol is up here is 1005 config interface Serial0 ip address 50.0.0.2 255.0.0.0 no ip mroute-cache bandwidth 56000 fair-queue 64 256 0 ! also using HDLC encap. !note with this 1005 config, I got Serial0 is up, line protocol is down Anyone have sample config on EXTERNAL DSU/CSU. I looked thru cisco site, they just have sample for INTERNAL only, which I don't have those command (ie: service-module , and T1-controller). Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
