ISDN,multy channels bundle [7:13943]
Hi,all cisco 2610, 3 BRIs, I use it to connect to Internet. I configure the interfaces like this, Interface BRI1/0 no ip address ip nat outside encapsulation ppp dialer rotary-group 0 Interface BRI1/1 no ip address ip nat outside encapsulation ppp dialer rotary-group 0 Interface BRI1/2 no ip address ip nat outside encapsulation ppp dialer rotary-group 0 Interface Dialer0 ip address negotiated ip nat outside encapsulation ppp dialer in-band dialer idle-timeout 180 dialer string xxx dialer load-threshold 1 either dialer-group 1 ppp authentication pap callin ppp pap sent-username xxx password xxx It will bring up all 6 B-channels,and I can connect to Internet via it. But it seems only 1 channel is used because I found that the speed of the ftp task cannot exceed 64K bits/second. Thinking the B-channels should be bundled up, I use "ppp multilink" for Interface Dialer0 (right?). The B-channels can still be brought up, but the PCs inside the E0/0 cannot connect to outside then. Anyone can help me? Thanks in advance. Winway _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13943&t=13943 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN,multy channels bundle [7:13943]
Does your ISP support Multilink? As it seems it does not allow you to form a Multilink bundle. Winway wrote: > Hi,all > > cisco 2610, 3 BRIs, I use it to connect to Internet. > I configure the interfaces like this, > > Interface BRI1/0 > no ip address > ip nat outside > encapsulation ppp > dialer rotary-group 0 > > Interface BRI1/1 > no ip address > ip nat outside > encapsulation ppp > dialer rotary-group 0 > > Interface BRI1/2 > no ip address > ip nat outside > encapsulation ppp > dialer rotary-group 0 > > Interface Dialer0 > ip address negotiated > ip nat outside > encapsulation ppp > dialer in-band > dialer idle-timeout 180 > dialer string xxx > dialer load-threshold 1 either > dialer-group 1 > ppp authentication pap callin > ppp pap sent-username xxx password xxx > > It will bring up all 6 B-channels,and I can connect to Internet via it. > But it seems only 1 channel is used because I found that the speed of the > ftp task cannot exceed 64K bits/second. > > Thinking the B-channels should be bundled up, I use "ppp multilink" for > Interface Dialer0 (right?). The B-channels can still be brought up, but > the PCs inside the E0/0 cannot connect to outside then. > > Anyone can help me? > Thanks in advance. > > Winway > > > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14050&t=13943 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]