Mike,
I GOT IT TO WORK
DLSW using frame in direct encapsulation,no ip addresses or routes in
sight!!!
Thanks for all your suggestions.
I didn't use the local dlci but did change the llc2 mappings to point to the
dlci closest to the frame switch for each spoke router.
So if rtr1 is spoke and its local dlci is 201 and the switch dlci for rtr1
is 102 then i used:
rtr1
!
dlsw local-peer
dlsw remote-peer 0 frame-relay interface Serial0/0 201
dlsw bridge-group 1
!
interface Serial0/0
no ip address
encapsulation frame-relay
clockrate 200
frame-relay map llc2 201
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
bridge-group 1
and the same thing the other end.
many thanks again for helping me.
Just hope its a question in Brussels in March
Cheers
Richard
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24930&t=24930
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
