George,
You probably end up better with 256megs of ram or more. With 128megs of
ram and you're running 12.2.2T code, assuming that you're running
enterprise or higher level such as for ssh, you probably using about 1/3
of your ram just for loading the ios code. So you don't have much. I
would stick to 12.0xT codes at ip-plus level if all you're doing is bgp on
that router. That will definitely use less memory.
-Frank
On Tue, 17 Jul 2001, George Stylianou wrote:
hi,
Does anyone happen to know the memory requirements for cisco NSE-1 running
IOS 12.2.2T in order to carry full BGP table (+/- 10 routes)?
I have seen problems with having 128mb - the router runs out of memory a
few
minutes after rebooting then shuts down CEF and BGP.
thanks
George
This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
notify the sender immediately by telephone, and delete the e-mail. When
addressed to clients of the company from where this e-mail originates
(the
sending company) any opinion or advice contained in this e-mail is subject
to the terms and conditions expressed in any applicable terms of business
or
client engagement letter . The sending company does not accept liability
for
any damage, loss or expense arising from this e-mail and/or from the
accessing of any files attached to this e-mail.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=12674t=12612
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
