It is. It's a token ring LAM, Lobe Attachment Module. Too bad when Madge
acquired all that Olicom T/R equipment they didn't preserve the
documentation.
Anyway, on to troubleshooting. First make sure the ring speeds are the same
on all devices. Then, issue a "clear int to0" on your router. Check the
status of the interfaces on the router by doing a 'show interface
tokenring0' (or whatever tokenring int you're using). Paste that into a
reply email if you're still having problems.
You could have a bad LAM on your hands, too. Or bad cabling. If you're
trying to use a 9-pin to RJ45 converter, make sure it's a MEDIA CONVERTER
and not a serial converter - the normal 9 pin-to-RJ45 connectors that we use
for consoles won't work on a T/R DB-9 interface.
-e-
- Original Message -
From: 1oFmANy
To:
Sent: Tuesday, June 19, 2001 7:12 AM
Subject: Olicom OC-3612 [7:9065]
> Anybody know if this is a stand-alone token-ring hub or requires an
> additional connection out the back ?
>
> I bought it thinking it is a dumb hub and when connected my interfaces
comes
> up however I can't ping between them - almost as if the connections are
not
> sharing the backplane..aaargh !
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9144&t=9065
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]