Re: 2900XL Switch [7:7053]
On Mon, 4 Jun 2001, Rodney Spears wrote: > Can anyone please advise me of what is wrong with my > Switch? It keeps rebooting and rebooting into this > loop. Thanks in advance, the output from the 2900XL > is below. Looks like a hardware problem to me. What does the TAC say? Or your favorite official support channel? > Cisco Internetwork Operating System Software > IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version > 12.0(5.1)XW, MAINTENANCE IN > TERIM SOFTWARE > Copyright (c) 1986-2000 by cisco Systems, Inc. > Compiled Thu 21-Dec-00 11:45 by devgoyal > > Switch uptime is 14 seconds > > cisco WS-C2924-XL (PowerPC403GA) processor (revision > 0x11) with 8192K/1024K byte > s of memory. > > > C2900XL Boot Loader (C2900-HBOOT-M) Version > 12.0(5.1)XP, MAINTENANCE INTERIM SOF > TWARE > Compiled Fri 10-Dec-99 11:06 by cchang > starting... > Base ethernet MAC Address: 00:02:16:65:20:40 > Xmodem file system is available. > Initializing Flash... > flashfs[0]: 111 files, 3 directories > flashfs[0]: 0 orphaned files, 0 orphaned directories > flashfs[0]: Total bytes: 3612672 > flashfs[0]: Bytes used: 2861568 > flashfs[0]: Bytes available: 751104 > flashfs[0]: flashfs fsck took 6 seconds. > ...done Initializing Flash. > Boot Sector Filesystem (bs:) installed, fsid: 3 > Parameter Block Filesystem (pb:) installed, fsid: 4 > Loading > "flash:c2900xl-c3h2s-mz-120.5-xu.bin"... > > # > > File "flash:c2900xl-c3h2s-mz-120.5-xu.bin" > uncompressed and installed, entry poi > nt: 0x3000 > executing... > > Restricted Rights Legend > > Use, duplication, or disclosure by the Government is > subject to restrictions as set forth in subparagraph > (c) of the Commercial Computer Software - Restricted > Rights clause at FAR sec. 52.227-19 and subparagraph > (c) (1) (ii) of the Rights in Technical Data and > Computer > Software clause at DFARS sec. 252.227-7013. > >cisco Systems, Inc. >170 West Tasman Drive >San Jose, California 95134-1706 > > > > Cisco Internetwork Operating System Software > IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version > 12.0(5.1)XW, MAINTENANCE IN > TERIM SOFTWARE > Copyright (c) 1986-2000 by cisco Systems, Inc. > Compiled Thu 21-Dec-00 11:45 by devgoyal > Image text-base: 0x3000, data-base: 0x00329E10 > > > Initializing C2900XL flash... > flashfs[1]: 111 files, 3 directories > flashfs[1]: 0 orphaned files, 0 orphaned directories > flashfs[1]: Total bytes: 3612672 > flashfs[1]: Bytes used: 2861568 > flashfs[1]: Bytes available: 751104 > flashfs[1]: flashfs fsck took 7 seconds. > flashfs[1]: Initialization complete. > ...done Initializing C2900XL flash. > C2900XL POST: System Board Test: Passed > C2900XL POST: Daughter Card Test: Passed > C2900XL POST: CPU Buffer Test: Passed > C2900XL POST: CPU Notify RAM Test: Passed > C2900XL POST: CPU Interface Test: Passed > C2900XL POST: Testing Switch Core: Passed > Error with Switch Core BIST test Phase 0. > Returns: Test Complete Low : 0x000FFF7F, Test Complete > High : 0x000E > Test Phase Low: 0x, Test Phase > High : 0x0200 > Test Phase Third : 0x, Test Complete > Third : 0x > > C2900XL POST FAILURE: Testing Switch Core: Failed > C2900XL POST FAILURE: Testing Buffer Table: Failed > C2900XL POST FAILURE: Data Buffer Test: Failed > C2900XL POST FAILURE: Configuring Switch Parameters: > Failed > C2900XL POST FAILURE: Switch Core BIST failed. > C2900XL POST FAILURE: Cannot test Modules due to > failure of Switch Core POST > Del Mar Failure (0th Del Mar): req system failed to > init > C2900XL POST FAILURE: > C2900XL POST FAILURE: ATM: required system failed to > init > C2900XL POST: Ethernet Controller Test: Passed > C2900XL POST FAILURE: MII Test: Failed > C2900XL POST FAILURE: Error waiting for Ethernet > Controller and SW_PARAMS > C2900XL POST FAILURE: Initialization/POST failed > C2900XL POST FAILURE: AT: Failing because system POST > failed > Exception (8192)! Debug Exception (Could be NULL > pointer dereference) > CPU Register Context: > Vector = 0x2000 PC = 0x000EECC8 MSR = 0x00029200 > CR = 0x2200 > LR = 0x000F1F1C CTR = 0x001D6BD8 XER = 0x60001000 > R0 = 0x R1 = 0x0059E7E8 R2 = 0x R3 > = 0x > R4 = 0x0001 R5 = 0x R6 = 0x0059E980 R7 > = 0x0059E980 > R8 = 0x0059E980 R9 = 0x R10 = 0x > R11 = 0x0044 > R12 = 0x4200 R13 = 0xA0F40453 R14 = 0x > R15 = 0x > R16 = 0x R17 = 0x R18 = 0x > R19 = 0x > R20 = 0x R21 = 0x R22 = 0x > R23 = 0x > R24 = 0x R25 = 0x0020 R26 = 0x0059E980 > R27 = 0x0059E980 > R28 = 0x0020 R29 = 0x2513 R30 = 0x0001 > R31 = 0x > > Stack trace: > PC =
RE: 2900XL Switch [7:7053]
Usually a failure on POST means the Switch is Bad. You can try Xmodeming a new IOS image to it, but I think this one is really broken. TAC 1-800-553-nets Ejay Hire -Original Message- From: Rodney Spears [mailto:[EMAIL PROTECTED]] Sent: Monday, June 04, 2001 8:36 AM To: [EMAIL PROTECTED] Subject: 2900XL Switch [7:7053] Can anyone please advise me of what is wrong with my Switch? It keeps rebooting and rebooting into this loop. Thanks in advance, the output from the 2900XL is below. Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.1)XW, MAINTENANCE IN TERIM SOFTWARE Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Thu 21-Dec-00 11:45 by devgoyal Switch uptime is 14 seconds cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byte s of memory. C2900XL Boot Loader (C2900-HBOOT-M) Version 12.0(5.1)XP, MAINTENANCE INTERIM SOF TWARE Compiled Fri 10-Dec-99 11:06 by cchang starting... Base ethernet MAC Address: 00:02:16:65:20:40 Xmodem file system is available. Initializing Flash... flashfs[0]: 111 files, 3 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2861568 flashfs[0]: Bytes available: 751104 flashfs[0]: flashfs fsck took 6 seconds. ...done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 Loading "flash:c2900xl-c3h2s-mz-120.5-xu.bin"... # File "flash:c2900xl-c3h2s-mz-120.5-xu.bin" uncompressed and installed, entry poi nt: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.1)XW, MAINTENANCE IN TERIM SOFTWARE Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Thu 21-Dec-00 11:45 by devgoyal Image text-base: 0x3000, data-base: 0x00329E10 Initializing C2900XL flash... flashfs[1]: 111 files, 3 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 3612672 flashfs[1]: Bytes used: 2861568 flashfs[1]: Bytes available: 751104 flashfs[1]: flashfs fsck took 7 seconds. flashfs[1]: Initialization complete. ...done Initializing C2900XL flash. C2900XL POST: System Board Test: Passed C2900XL POST: Daughter Card Test: Passed C2900XL POST: CPU Buffer Test: Passed C2900XL POST: CPU Notify RAM Test: Passed C2900XL POST: CPU Interface Test: Passed C2900XL POST: Testing Switch Core: Passed Error with Switch Core BIST test Phase 0. Returns: Test Complete Low : 0x000FFF7F, Test Complete High : 0x000E Test Phase Low: 0x, Test Phase High : 0x0200 Test Phase Third : 0x, Test Complete Third : 0x C2900XL POST FAILURE: Testing Switch Core: Failed C2900XL POST FAILURE: Testing Buffer Table: Failed C2900XL POST FAILURE: Data Buffer Test: Failed C2900XL POST FAILURE: Configuring Switch Parameters: Failed C2900XL POST FAILURE: Switch Core BIST failed. C2900XL POST FAILURE: Cannot test Modules due to failure of Switch Core POST Del Mar Failure (0th Del Mar): req system failed to init C2900XL POST FAILURE: C2900XL POST FAILURE: ATM: required system failed to init C2900XL POST: Ethernet Controller Test: Passed C2900XL POST FAILURE: MII Test: Failed C2900XL POST FAILURE: Error waiting for Ethernet Controller and SW_PARAMS C2900XL POST FAILURE: Initialization/POST failed C2900XL POST FAILURE: AT: Failing because system POST failed Exception (8192)! Debug Exception (Could be NULL pointer dereference) CPU Register Context: Vector = 0x2000 PC = 0x000EECC8 MSR = 0x00029200 CR = 0x2200 LR = 0x000F1F1C CTR = 0x001D6BD8 XER = 0x60001000 R0 = 0x R1 = 0x0059E7E8 R2 = 0x R3 = 0x R4 = 0x0001 R5 = 0x R6 = 0x0059E980 R7 = 0x0059E980 R8 = 0x0059E980 R9 = 0x R10 = 0x R11 = 0x0044 R12 = 0x4200 R13 = 0xA0F40453 R14 = 0x R15 = 0x R16 = 0x R17 = 0x R18 = 0x R19 = 0x R20 = 0x R21 = 0x R22 = 0x R23 = 0x R24 = 0x R25 = 0x0020 R26 = 0x0059E980 R27 = 0x0059E980 R28 = 0x0020 R29 = 0x2513 R30 = 0x0001 R31 = 0x Stack trace: PC = 0x000EECC8, SP = 0x0059E7E8 Frame 00: SP = 0x0059E808PC = 0x Frame 01:
