The VBR is a variable bit rate(bandwidth allocation will vary), and the
CBR(bandwidth allocation stays constant) is a constant bit rate. I do not
have my atm configs here at work-but I will try to help you later today.
Roy [EMAIL PROTECTED]
-----Original Message-----
From: mak [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 07, 2001 4:20 AM
To: [EMAIL PROTECTED]
Subject: ATM PVC VBR
Dear all,
I would like to know is it any difference between two method of
configuring PVC
1. atm pvc 32 1 32 aal5snap 32000 32000
2. pvc 1/32
.....
.....
I am using method one, I have a problem is that I built a PVC between
two routers (12008 and 7507) running BGP, in-between is carrier network.
And the setting of carrier is VBR, I have set PVC on both routers as
VBR. Once I have booted up 7507, the speed is fast and normal, but after
several minutes, the speed is very slow. However, if I configure CBR -
within the range of VBR's SCR, the speed is normal and fast.
Is it any parameters I need to concern when I configure VBR?
Thanks
Regards,
Raymond
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
