Re: "All-in-one CCIE Lab Study Guide" where to get it from?
Access the Telecommunication Book Club at http://tcbc.booksonline.com Leo. Rio, Brazil Babar Hameed wrote: > Where do i get this "all in one ccie study guide" > > Babar Hameed > > -Original Message- > From: Andrew Lennon <[EMAIL PROTECTED]> > To: Tim Ross <[EMAIL PROTECTED]>, [EMAIL PROTECTED] > Date: Mon, 18 Dec 2000 15:28:59 - > Subject: RE: All-in-one CCIE Lab Study Guide: Lab #4 > > > do you have ip classless enabled? > > > > Andy > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Tim Ross > > Sent: Monday, December 18, 2000 15:14 > > To: [EMAIL PROTECTED]; GroupStudy LAB > > Subject: All-in-one CCIE Lab Study Guide: Lab #4 > > > > > > I have started going through the labs in the All-in-one Study Guide and > > = > > have a problem with Lab #4. The lab is for an ISDN floating static = > > route. I am using 2 3104's and an AGS+ as a frame_switch. The ISDN port > > = > > can ping the other ISDN port. Both are on the same subnet, 196.1.1.1 > > and = > > 196.1.1.2. The ISDN line (using a Teltone simulator) dials fine, but > > the = > > Static route does not appear in the routing table. I am using IOS = > > version 11.2 Enterprise on both ISDN routers(3104's, upgraded to run > > IOS = > > 11.2 Enterprise). I have entered the route several times and double = > > checked by entries: IP ROUTE 0.0.0.0 0.0.0.0 196.1.1.2 121 , but the = > > route will not appear in my routing table. Anyone ran across this = > > problem? I will probably see what I am overlooking soon, but insight is > > = > > appreciated. > > > > Thanks, > > Tim > > > > ___ > > To unsubscribe from the CCIELAB list, send a message to > > [EMAIL PROTECTED] with the body containing: > > unsubscribe ccielab > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: "All-in-one CCIE Lab Study Guide" where to get it from?
You may want to try www.addall.com They will check over thirty sites for the best cost. -Original Message- From: Jonathan Hays [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 20, 2000 4:30 PM To: Babar Hameed Cc: Andrew Lennon; Tim Ross; [EMAIL PROTECTED] Subject: Re: "All-in-one CCIE Lab Study Guide" where to get it from? Here is one method of finding books: 1. www.amazon.com 2. Search > Books 3. ccie all-in-one Babar Hameed wrote: > Where do i get this "all in one ccie study guide" > > Babar Hameed > > -Original Message- > From: Andrew Lennon <[EMAIL PROTECTED]> > To: Tim Ross <[EMAIL PROTECTED]>, [EMAIL PROTECTED] > Date: Mon, 18 Dec 2000 15:28:59 - > Subject: RE: All-in-one CCIE Lab Study Guide: Lab #4 > > > do you have ip classless enabled? > > > > Andy > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Tim Ross > > Sent: Monday, December 18, 2000 15:14 > > To: [EMAIL PROTECTED]; GroupStudy LAB > > Subject: All-in-one CCIE Lab Study Guide: Lab #4 > > > > > > I have started going through the labs in the All-in-one Study Guide and > > = > > have a problem with Lab #4. The lab is for an ISDN floating static = > > route. I am using 2 3104's and an AGS+ as a frame_switch. The ISDN port > > = > > can ping the other ISDN port. Both are on the same subnet, 196.1.1.1 > > and = > > 196.1.1.2. The ISDN line (using a Teltone simulator) dials fine, but > > the = > > Static route does not appear in the routing table. I am using IOS = > > version 11.2 Enterprise on both ISDN routers(3104's, upgraded to run > > IOS = > > 11.2 Enterprise). I have entered the route several times and double = > > checked by entries: IP ROUTE 0.0.0.0 0.0.0.0 196.1.1.2 121 , but the = > > route will not appear in my routing table. Anyone ran across this = > > problem? I will probably see what I am overlooking soon, but insight is > > = > > appreciated. > > > > Thanks, > > Tim > > > > ___ > > To unsubscribe from the CCIELAB list, send a message to > > [EMAIL PROTECTED] with the body containing: > > unsubscribe ccielab > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: "All-in-one CCIE Lab Study Guide" where to get it from?
Here is one method of finding books: 1. www.amazon.com 2. Search > Books 3. ccie all-in-one Babar Hameed wrote: > Where do i get this "all in one ccie study guide" > > Babar Hameed > > -Original Message- > From: Andrew Lennon <[EMAIL PROTECTED]> > To: Tim Ross <[EMAIL PROTECTED]>, [EMAIL PROTECTED] > Date: Mon, 18 Dec 2000 15:28:59 - > Subject: RE: All-in-one CCIE Lab Study Guide: Lab #4 > > > do you have ip classless enabled? > > > > Andy > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Tim Ross > > Sent: Monday, December 18, 2000 15:14 > > To: [EMAIL PROTECTED]; GroupStudy LAB > > Subject: All-in-one CCIE Lab Study Guide: Lab #4 > > > > > > I have started going through the labs in the All-in-one Study Guide and > > = > > have a problem with Lab #4. The lab is for an ISDN floating static = > > route. I am using 2 3104's and an AGS+ as a frame_switch. The ISDN port > > = > > can ping the other ISDN port. Both are on the same subnet, 196.1.1.1 > > and = > > 196.1.1.2. The ISDN line (using a Teltone simulator) dials fine, but > > the = > > Static route does not appear in the routing table. I am using IOS = > > version 11.2 Enterprise on both ISDN routers(3104's, upgraded to run > > IOS = > > 11.2 Enterprise). I have entered the route several times and double = > > checked by entries: IP ROUTE 0.0.0.0 0.0.0.0 196.1.1.2 121 , but the = > > route will not appear in my routing table. Anyone ran across this = > > problem? I will probably see what I am overlooking soon, but insight is > > = > > appreciated. > > > > Thanks, > > Tim > > > > ___ > > To unsubscribe from the CCIELAB list, send a message to > > [EMAIL PROTECTED] with the body containing: > > unsubscribe ccielab > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]