use
autoselect ppp
where is the dialer info??
Best Regards
Have A Good Day!!
Farhan Ahmed
MCSE+I, MCP Win2k, CCDA, CCNA, CSE, CCNA
Network Engineer
Mideast Data Systems Abudhabi Uae.
Privileged/Confidential Information may be contained in this message or
Attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
Conclusions and other information in this message that do not relate to the
Official business of this company shall be understood as neither given nor
Endorsed by it.
-Original Message-
From: Ahmed Mamoor Amimi [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 26, 2001 5:32 PM
To: [EMAIL PROTECTED]
Subject: Re: Async comes up but encapsulation fails [7:13834]
Both the routers get connected but can't ping both side and says
encapsualtion failed
the config on both side for async port is
interface Async1
ip address 192.168.4.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
keepalive 10
dialer in-band
dialer wait-for-carrier-time 5
dialer map ip 192.168.4.1 35
dialer-group 1
async default routing
async mode dedicated
!
router rip
network 192.168.4.0
network 192.168.5.0
!
line aux 0
login local
modem InOut
modem autoconfigure type usr_sportster
transport input all
stopbits 1
speed 38400
flowcontrol hardware
=
help me!!
Bruce McNamara wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Have you verified the the encapsulation type on either
side? We use CHAP
as
it is professed to be more secure using the
chanllenge-response method.
[GroupStudy.com removed an attachment of type application/octet-stream which
had a name of Farhan Ahmed.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=13883t=13834
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]