Can you use the serial ports on the 3640 for async? I'm wrestling with a
situation where I want to configure an external modem to dial into the
router using PPP to test Radius authentication.. I was trying to find a
way to take the mini serial connector and convert it to RS-232 to connect to
the modem...I ended up configuring the modem thru the AUX port, but you
can't make that part of a rotary group and I wanna test the Dialer interface
so I know how it'll work on all of the other ports (we're using a PRI T1
controller with the internal Digital Modem module to accept analog modem
calls as well as ISDN)
Mike W.
"Brian Wilkins" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> It sounds like you are trying to configure dialbackup. If this is the
case,
> you just need to put a "backup interface" statement under the interface to
> be backed up, configure a route with a higher admin-distance on the backup
> interface, and setup an ACL to specify interesting traffic. If you get
> those item accomplished, it should work.
>
> Hope that helps.
>
> Brian Wilkins
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12335&t=12142
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
