The tunnel must be closed until the ATM opens the transaction. Check you hex address coming from the ATM.
Terry Martin wrote: > > This is a good one. I have a 3640 and a 1721 connected over > point-to-point T1. Everything is up and up, no problems. Each > of the routers listed above have another serial port. The 3640 > is connected to an IBM host (9000) and the 1721 is connected to > an ATM cash money machine (Diebold) (located at a bank). > Everything on that circuit, which uses BSTUN tunneling through > the HDLC is up and up...but I can not get the BSTUN peer groups > to talk. > > I know that this scenario is pretty vague, but any input would > help. I have peer groups, and static routes. But when I do a > show bstun all I get is the IP address of my peer, and the fact > that the tunnel is closed. I can ping, telnet, everything else, > but I can not get the BSTUN to show a valid connection. It is a > simple point to point setup. > > Any ideas? When I do a debug BSTUN events, debug BSTUN > packets, debug BSC events, and debug BSC packets on my router > with the AS400 connected, I do not see any traffic. This is my > secondary router. (Does the polling). Would this be a problem > on the AS400 or router? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70631&t=70582 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]