Re: CISCO 2600 NAT [7:43139]
is the service port 5080 started on the server ? ""jc theard"" Hello all, > > I'm trying to configure NAT on a CISCO 2621. I managed to configure it > basicaly but I want to use overloading and there is my problem. > As shown below I try to specify a route to the right server for port 80 and > port 5080. For the port 80, everythg is going well but I can't reach port > 5080. Is there any thing to take into account for non-standard ports? > > "ip nat inside source static tcp 192.168.99.100 80 195.246.218.181 80" > "ip nat inside source static tcp 192.168.99.102 5080 195.246.218.181 5080" > > Thank you for your help > > JC Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43182&t=43139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CISCO 2600 NAT [7:43139]
If you have ACL's applied inbound to your NAT outside interface make sure you explicitly allow outside inbound connections to port 5080. HTH, Don Nguyen Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43205&t=43139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CISCO 2600 NAT [7:43139]
yes it's opened on the server Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43209&t=43139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CISCO 2600 NAT [7:43139]
yes it's open on the server Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43207&t=43139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CISCO 2600 NAT [7:43139]
yes it's opened on the server Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43208&t=43139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CISCO 2600 NAT [7:43139]
Here is the config I'm using: interface FastEthernet0/0 description connected to Internet ip address 195.250.218.18 no ip directed-broadcast ip nat outside speed 100 half-duplex ! interface FastEthernet0/1 description connected to EthernetLAN ip address 192.168.99.1 255.255.255.0 no ip directed-broadcast ip nat inside speed 100 half-duplex ip nat inside source list 7 interface FastEthernet0/0 overload ip nat inside source static tcp 192.168.99.102 5080 195.250.218.181 5080 extendable ip nat inside source static tcp 192.168.99.100 80 195.250.218.181 80 extendable ip classless ip route 0.0.0.0 0.0.0.0 195.246.218.177 no ip http server ! access-list 7 permit 192.168.99.0 0.0.0.255 ! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43210&t=43139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CISCO 2600 NAT [7:43139]
Just wondering do you have connectiveity to the internet from the router...? Becuase your config does not show a subnetmask for FA0/0. If you do have connectivity I suggest wiping out the config and redoing it. Merly becasue of a non-apparent typo. MJ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46220&t=43139 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
