At the first look through your message, it seems like the port 1/1
on HubB (the one connected to your port 0/4) is only running half-duplex. I
would check that one first.
Hth,
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
-Original Message-
From: Deloso, Elmer G. [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 21, 2000 8:28 AM
To: '[EMAIL PROTECTED]'
Subject: Monitoring/Troubleshooting Catalysts : what does this SYSLOG outp
ut mean?
Hi, group.
Just want to know why i'm getting this in my syslog on my 2912
whose port4 is connected by fiber to a 5500. I do know that there's
a lot of trafiic coming into this port and once in a while the LED turns
orange. Please comment on this. Thanks.
Elmer
FastEthernet0/4 is up, line protocol is up
Hardware is Fast Ethernet, address is 0030.1900.7284 (bia 0030.1900.7284)
MTU 1500 bytes, BW 10 Kbit, DLY 100 usec,
reliability 254/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 100Mb/s
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:02, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 292000 bits/sec, 114 packets/sec
5 minute output rate 629000 bits/sec, 149 packets/sec
429157271 packets input, 2185991621 bytes
Received 72566224 broadcasts, 562577 runts, 0 giants, 0 throttles
2317609 input errors, 877616 CRC, 877416 frame, 1391 overrun, 2261
ignored
0 watchdog, 1251401 multicast
0 input packets with dribble condition detected
553912904 packets output, 4116503002 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Syslog logging: enabled (0 messages dropped, 2488 flushes, 0 overruns)
Console logging: level debugging, 252136 messages logged
Monitor logging: level debugging, 0 messages logged
Buffer logging: level debugging, 124840 messages logged
File logging: disabled
Trap logging: level informational, 124845 message lines logged
Log Buffer (4096 bytes):
1/1 (half duplex).
11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).
11w4d: %LINK-CLUSTER_MEMBER_3-4-ERROR: FastEthernet0/4 is experiencing
errors
11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).
11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).
11w4d: %LINK-CLUSTER_MEMBER_3-4-ERROR: FastEthernet0/4 is experiencing
errors
11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).
11w4d: %LINK-CLUSTER_MEMBER_3-4-ERROR: FastEthernet0/4 is experiencing
errors
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
