Thanks Chuck, Great resource here. http://www.cisco.com/networkers/nw01/pres/preso/RoutingandSwitchingTechnolog ies/RST-204.pdf Was just going thro this ...Look at te one on privilege levels. I am pasting whats out there. show running-config looks like it needs more than the defined privilege levels to get this to work. I have tried enabling router level, Ip under interface etc...only to still see part of the config.. I wonder if you have to enable a long list of things to see the entire running-config... Might as well give 'em a print out of the config for the level 5 users. -) any ideas ? Cheers,Padhu ---------------------------------------------------------------------------- ----------------- username gltest privilege 5 password 0 gltest privilege configure level 5 interface privilege interface level 5 shutdown privilege exec level 5 show ip route privilege exec level 5 configure terminal privilege exec level 5 show running-config Now i do disable 5 R5#show running-config Building configuration... Current configuration: ! ! ! interface Loopback0 ! interface Ethernet0 ! interface Serial0 ! interface Serial0.1 point-to-point ! interface Serial0.2 multipoint ! interface Serial1 ! interface BRI0 shutdown ! ! end R5# -----Original Message----- From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 19, 2001 2:39 PM To: Cisco Mail List; CCIE_Lab Groupstudy List Subject: Networkers presentation links I know these have been posted before, but in case you missed it: http://www.cisco.com/networkers/nw01/pres/index.html lots of big PDF files. you may want to download or view over higher speed connections. enjoy Chuck **Please read:http://www.groupstudy.com/list/posting.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13009&t=13009 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]