Brian, add the following to your config, and then try your pings again. --- PIX#(config) conduit permit icmp any any --- I believe your PPPoE connection is working, as proof from your output below:
>>PPPoE Tunnel and Session Information (Total tunnels=1 sessions=1) >> Tunnel id 0, 1 active sessions >> time since change 6015 secs >> Remote MAC Address 00:00:00:xx >> 1010 packets sent, 1023 received, 12641 bytes sent, 0 received >> Remote MAC is 00:00: >>Session state is SESSION_UP >> Time since event change 7687 secs, interface outside >> PPP interface id is 1 >> 1010 packets sent, 1023 received, 12641 bytes sent, 0 received HTHs, Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Brian Zeitz Sent: Friday, May 17, 2002 8:48 AM To: [EMAIL PROTECTED] Subject: Pix 515 on ADSL Help! :) [7:44346] Well, I upgraded my pix 515 to 6.2. I am kind of new to firewalls, besides I can't use the PDM. "This version of PDM does not officially support PIX 6.2(1). Please upgrade PDM.", I guess this is a good reason to learn the command line in pix. I cant ping theISPs DNS servers from the PDM. Any way to test if my Username and password is working for ADSL ? My ISP (verizon, requires a U/P for PPPoE, I am not sure if it is accepting the password. The modem lights are all green. Anyhow, it's saying UP/UP, and I have the link up, but I am not sure how to check if my PPPOE password is working. I am using CHAP, maybe this is not right. I donno, it looks like its working, but I cant get outside, even if I use the DHCP Server feature. I am also wondering if failover is going to work with ADSL, which is another issue. Keep in mind I am not sure if the 515 will even work with ADSL as someone pointed out, it may not be supported although I am running Pix 6.2(1) My question is how can I test that my PPPoE required Username and password are correct, and I am authenticated. I am now working on getting Debug PPPoE to see maybe if I can find out if this is working. Any pointers would be helpful. mydev# show vpdn username vpdn username vez2bxe password ******** mydev# show vpdn group verz1 vpdn group verz1 request dialout pppoe vpdn group verz1 localname vez2vbxe vpdn group verz1 ppp authentication chap mydev# show vpdn pppinterface PPP virtual interface id = 1 PPP authentication protocol is CHAP Server ip address is 10.10.26.10 Our ip address is 151.22.13.12 Transmitted Pkts: 1096, Received Pkts: 1109, Error Pkts: 0 MPPE key strength is None MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0 MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0 Rcvd_Out_Of_Seq_MPPE_Pkts: 0 mydev(config)# show int e0 interface ethernet0 "outside" is up, line protocol is up Hardware is i82559 ethernet, address is 0.000. IP address 151.22.13.13, subnet mask 255.255.255.255 MTU 1492 bytes, BW 10000 Kbit half duplex 1410 packets input, 84908 bytes, 0 no buffer Received 464 broadcasts, 0 runts, 0 giants 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 1305 packets output, 272926 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 babbles, 0 late collisions, 0 deferred 1 lost carrier, 0 no carrier input queue (curr/max blocks): hardware (128/128) software (0/1) output queue (curr/max blocks): hardware (0/1) software (0/1) vesdev.com(config)# mydev# show vpdn %No active L2TP tunnels %No active PPTP tunnels PPPoE Tunnel and Session Information (Total tunnels=1 sessions=1) Tunnel id 0, 1 active sessions time since change 6015 secs Remote MAC Address 00:00:00:xx 1010 packets sent, 1023 received, 12641 bytes sent, 0 received Remote MAC is 00:00: Session state is SESSION_UP Time since event change 7687 secs, interface outside PPP interface id is 1 1010 packets sent, 1023 received, 12641 bytes sent, 0 received usage: debug pppoe {error|packet|event} Usage: [no] debug icmp trace [no] debug packet [src [netmask ]] [dst [netmask ]] [[proto icmp]|[proto tcp [sport ] [dport ]] |[proto udp [sport ] [dport d_p]] [rx|tx|both] [no] debug sqlnet [no] debug crypto ipsec|isakmp|ca [no] debug dhcpc detail|error|packet [no] debug dhcpd event|packet [no] debug vpdn error|event|packet [no] debug ppp error|io|uauth|chap|upap|negotiation [no] debug pppoe error|packet|event [no] debug ssh [no] debug h323 h225|h245|ras asn|event [no] debug fover [no] debug rtsp [no] debug fixup [no] debug rip [no] debug pdm history [no] debug ssl [cipher|device] [no] debug dns [no] debug sip [no] debug skinny [no] debug access-list [no] debug radius [session|all|user ] [no] debug ntp [adjust|authentication|events|loopfilter|packets|params| select|sync|validity] [no] debug ils [no] debug igmp [no] debug mfwd mydev# mydev# debug pppoe usage: debug pppoe {error|packet|event} Usage: [no] debug icmp trace [no] debug packet [src [netmask ]] [dst [netmask ]] [[proto icmp]|[proto tcp [sport ] [dport ]] |[proto udp [sport ] [dport d_p]] [rx|tx|both] [no] debug sqlnet [no] debug crypto ipsec|isakmp|ca [no] debug dhcpc detail|error|packet [no] debug dhcpd event|packet [no] debug vpdn error|event|packet [no] debug ppp error|io|uauth|chap|upap|negotiation [no] debug pppoe error|packet|event [no] debug ssh [no] debug h323 h225|h245|ras asn|event [no] debug fover [no] debug rtsp [no] debug fixup [no] debug rip [no] debug pdm history [no] debug ssl [cipher|device] [no] debug dns [no] debug sip [no] debug skinny [no] debug access-list [no] debug radius [session|all|user ] [no] debug ntp [adjust|authentication|events|loopfilter|packets|params| select|sync|validity] [no] debug ils [no] debug igmp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44365&t=44346 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]