Nevermind... I found the answer I was looking for. Thanks all..
Mike
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Michael Vicchiollo
> Sent: Tuesday, January 02, 2001 12:35 PM
> To: [EMAIL PROTECTED]
> Subject: T-1 versus PRI in asynch remote access shelf?
>
>
> Hello all...
>
> I have a remote access shelf (AS5300) with a Quad T1/PRI
> module. Is there
> an increase in the level of difficulty of configuration and maintenance
> associated with using straight T1 over the PRI that would justify pushing
> for the PRI lines? This assumes that we are going to use 2 T1s
> for dial in
> and have our 800 number somehow associated with the AS5300 T1 signaling
> channel AND that we can use the same system for dial out regardless of our
> choice of circuit type. I have configured a system with PRIs before and it
> was a piece of cake. I just don't have any idea of how to point an 800
> number at a T1 without an associated phone number. Any help would be
> appreciated.
>
> Mike
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
