RE: how to configure VLAN on 2900 switch-how about full duplex and spanning tree
Hi Chee Tong, With your current "show run" below, you're only running one vlan1 on your catalyst 2924. By default, the catalyst 2924 comes with one VLAN1. By adding another VLAN2 in your switch, you can reduce broadcasts on your network. Here is an example of placing port fastethernet0/6 on VLAN2: conf t int fastethernet0/2 switchport access vlan 2 And if you want to enable spanning-tree, first do this to see if it's already enabled on the switch: sh span If it shows that it's "disabled", then you can do this to enable it: conf t spanning Hope it'll help you. Luan T. Kim, MCSE, CCNA* Systems/Network Infrastructure Engineer* MP3.COM, INC. http://www.mp3.com * Phone: 858-623-7341Cell: 858-382-3055 * Fax: 858-623-7400Email: [EMAIL PROTECTED] * On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote: Hi.. Kim! Thank for your info, but I am going to ask you futher , what is the difference between VLAN1 and VLAN2, pls take a look on the following configuration file, the VLAN1 (below) it is for every fastethernet interface? what is the syntax to configure spanning tree and full duplex on the interface. Thank you in advance :) Tong User Access Verification Password: Password: simtesten Password: simtest#sh conf Using 1315 out of 32768 bytes ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname simtest ! enable secret 5 $1$C8R4$zMASNLTu0DeKZ.gCgcomt. ! ! ! ! ! ! ip subnet-zero ! ! ! interface FastEthernet0/1 ! interface FastEthernet0/2 ! interface FastEthernet0/3 ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface FastEthernet0/8 ! interface FastEthernet0/9 ! interface FastEthernet0/10 ! interface FastEthernet0/11 ! interface FastEthernet0/12 ! interface FastEthernet0/13 ! interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface VLAN1 ip address 57.198.165.200 255.255.254.0 no ip directed-broadcast no ip route-cache ! ip default-gateway 57.198.164.1 snmp-server engineID local 0009020196F23840 snmp-server community private RW snmp-server community public RO snmp-server chassis-id 0x10 ! line con 0 transport input none stopbits 1 line vty 0 4 password login line vty 5 15 password XX login ! end -Original Message- From: Luan Kim [mailto:[EMAIL PROTECTED]] Sent: Monday, July 03, 2000 10:14 AM To: Sim, CT (Chee Tong) Cc: 'John Hardman'; '[EMAIL PROTECTED]' Subject: Re: how to configure VLAN on 2900 switch hi Chee Tong, By default, your cat29xx comes with one vlan(vlan1). For example, if you want to place your fastethernet0/13 on vlan2, you do this: conf t int fastEthernet 0/13 switchport access vlan 2 Hope it'll help you. Luan T. Kim, MCSE, CCNA* Systems/Network Infrastructure Engineer* MP3.COM, INC. http://www.mp3.com * Phone: 858-623-7341Cell: 858-382-3055 * Fax: 858-623-7400Email: [EMAIL PROTECTED] * On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote: Dear Friends, What is the procedure to configure VLan on 2900 switches, wat command to use? If we don't configured VLAN on 2900 switches, will it cause the slowness in the network Chee Tong == De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. == The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. == ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL
Re: how to configure VLAN on 2900 switch-how about full duplex and spanning tree
Hi Geoffrey, I believe Chee Tong was asking about vlan's in a catalyst 2924 model. The syntax you showed down below is probably for configuring a high end cat55xx or 65xx. You CANNOT use those syntax on a catalyst 2924; they don't exist. Luan T. Kim, MCSE, CCNA* Systems/Network Infrastructure Engineer* MP3.COM, INC. http://www.mp3.com * Phone: 858-623-7341Cell: 858-382-3055 * Fax: 858-623-7400Email: [EMAIL PROTECTED] * On Mon, 3 Jul 2000, A. Geoffrey Cauchi wrote: Hi First you have to define VLAN 2. In the enable mode, (not the config mode!), type the following Vlan database Vlan vlan2 Vtp server Vtp domain domain_name Apply Exit Then continue as specified below Regards Geoffrey - Original Message - From: "Luan Kim" [EMAIL PROTECTED] To: "Sim, CT (Chee Tong)" [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Monday, July 03, 2000 12:48 PM Subject: RE: how to configure VLAN on 2900 switch-how about full duplex an d spanning tree Hi Chee Tong, With your current "show run" below, you're only running one vlan1 on your catalyst 2924. By default, the catalyst 2924 comes with one VLAN1. By adding another VLAN2 in your switch, you can reduce broadcasts on your network. Here is an example of placing port fastethernet0/6 on VLAN2: conf t int fastethernet0/2 switchport access vlan 2 And if you want to enable spanning-tree, first do this to see if it's already enabled on the switch: sh span If it shows that it's "disabled", then you can do this to enable it: conf t spanning Hope it'll help you. Luan T. Kim, MCSE, CCNA* Systems/Network Infrastructure Engineer* MP3.COM, INC. http://www.mp3.com * Phone: 858-623-7341Cell: 858-382-3055 * Fax: 858-623-7400Email: [EMAIL PROTECTED] * On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote: Hi.. Kim! Thank for your info, but I am going to ask you futher , what is the difference between VLAN1 and VLAN2, pls take a look on the following configuration file, the VLAN1 (below) it is for every fastethernet interface? what is the syntax to configure spanning tree and full duplex on the interface. Thank you in advance :) Tong User Access Verification Password: Password: simtesten Password: simtest#sh conf Using 1315 out of 32768 bytes ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname simtest ! enable secret 5 $1$C8R4$zMASNLTu0DeKZ.gCgcomt. ! ! ! ! ! ! ip subnet-zero ! ! ! interface FastEthernet0/1 ! interface FastEthernet0/2 ! interface FastEthernet0/3 ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface FastEthernet0/8 ! interface FastEthernet0/9 ! interface FastEthernet0/10 ! interface FastEthernet0/11 ! interface FastEthernet0/12 ! interface FastEthernet0/13 ! interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface VLAN1 ip address 57.198.165.200 255.255.254.0 no ip directed-broadcast no ip route-cache ! ip default-gateway 57.198.164.1 snmp-server engineID local 0009020196F23840 snmp-server community private RW snmp-server community public RO snmp-server chassis-id 0x10 ! line con 0 transport input none stopbits 1 line vty 0 4 password login line vty 5 15 password XX login ! end -Original Message- From: Luan Kim [mailto:[EMAIL PROTECTED]] Sent: Monday, July 03, 2000 10:14 AM To: Sim, CT (Chee Tong) Cc: 'John Hardman'; '[EMAIL PROTECTED]' Subject: Re: how to configure VLAN on 2900 switch hi Chee Tong, By default, your cat29xx comes with one vlan(vlan1). For example, if you want to place your fastethernet0/13 on vlan2, you do this: conf t int fastEthernet 0/13 switchport access vlan 2 Hope it'll help you. Luan T. Kim, MCSE, CCNA* Systems/Network Infrastructure Engineer* MP3.COM, INC. http://www.mp3.com * Phone: 858-623-7341Cell:
