That's actually for a LS1010. The password recovery
on a LS100 is unbeliveably complicated. You have to
enter a very cryptic string from a hidden menu on the
LS100. I had to do it on mine, so you'll need to call
TAC and open a case to get this resolved. There is no,
"set the config register to o/r 0x142" or the like. I
wrote it down on top of my LS100, but it's at the
office and I don't want to give you one charachter off
of that string and lock up your 100. So, just give TAC
a call (provided you have any valid contract on Cisco
equipment) and they will get it straightened out.
Hope this helps.
Regards,
Frank Zahrt, CCDP, CCNP(voice)
NEC Senior Network Engineer
--- Sam Adams [EMAIL PROTECTED] wrote:
http://www.cisco.com/warp/public/474/pswdrec_1600.html
Enjoy
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
Craig Jensen
Sent: Tuesday, November 07, 2000 8:07 PM
To: [EMAIL PROTECTED]
Subject: password recovery on lightstream
hyperswitch 100
Hi
I acquired one of these switches and do not know the
password. Any help or
pointers on recovering the password would be
appreciated.
Craig
_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one Place.
http://shopping.yahoo.com/
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]